To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Replace one of the dual-beam headlights in your Opti-Brite conversion kit (HLL93HLB-2) with this DOT compliant light. Rear-facing LEDs and metallic parabolic reflector create a broad, smooth beam. Powder coated die-cast aluminum housing is rustproof.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the replacement headlamp for Opti-Brite Sealed Beam to LED Conversion Kit. This light replaces one damaged headlamp from your Optronics Opti-Brite Headlight Conversion Kit, part number HLL93HLB-2. That's a full LED system. LEDs are super efficient and they're ultra bright and long lasting. They're going to have about a 30,000 hour life span. It's going to feature a rear facing LED system as well as a metallic parabolic reflector that's going to create a broad, smooth beam. Low beam and high beam function is built in. The low wide beam covers more of the road.
The high beam makes it easier to see at a distance. The unit's going to feature durable surface-mount technology. When it comes to the construction of the LED circuit board. That better withstands shock and vibration. It also allows for improved heat distribution. It's going to have a nice clear polycarbonate lens.
It's going to have the power coated die-cast aluminum housing that's rust proof. It features an IP67 rated for industry-standard protection against dust and moisture. It will accept an H4 3-blade wiring connector, not included. It's compatible with 12 volt DC and 24 volt DC systems, and it's Department of Transportation compliant, so it meets FMVSS 108 and CMVSS 108 requirements for automotive lighting. The diameter on the unit is about seven inches. It's going to contain a total of 11 diodes, or 11 LEDs, and Optronics puts a lifetime warranty on their LEDs. We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it. Then we will also be able to turn off our overhead lights so you can see it in a low light setting.
So we'll go ahead and do it with the lights on, and then we'll do it with the lights off. A very bright light. Again, full LED system. That's going to do it for today's look at the replacement headlamp for Opti-Brite Sealed Beam to LED Conversion Kit.
Average Customer Rating: 4.1 out of 5 stars (11 Customer Reviews)
Replace one of the dual-beam headlights in your Opti-Brite conversion kit (HLL93HLB-2) with this DOT compliant light. Rear-facing LEDs and metallic parabolic reflector create a broad, smooth beam. Powder coated die-cast aluminum housing is rustproof.My fire department is purchase a new Pierce fire truck. LED headlights from Pierce are over $1500, our salesmen recommended I buy some online instead. I did some research and found these headlights to be the best bang/buck for quality and price. I first installed them on our 1994 Pierce fire engine and have installed another set of Low and Hi beams on our 2014 Pierce fire engine, a third set will be ordered when we take delivery of our 107' Pierce ladder truck. The lights look great and throw off a nice bright white compared to the yellow of the old sealed beams. The only reason I cannot give these 5 stars is that they are not plug and play. I had to re-pin the wire plugs in order for these to work on both fire engines. After installing the first pair I thought maybe in was a fluke but when I had to switch the same wires on another fire engine that is 20 years newer I knew it was not a fluke. Not a big deal, if you have a test light and are only moderately handy its an easy fix. But for someone just looking to swap a bulb it is more involved then that.
These headlights were a great upgrade for our fire engine. We have to engines, both with LED high and low beams. Zero issues and nice bright white lights. We even ordered a 3rd set for our brand new fire truck. Pierce wanted over $1000 to upgrade to LED headlights so we did the upgrade ourselves for less than half the cost!
Does not hold up well. Lifetime warranty but takes forever to get replacements. I have chosen to go to other brands with better warranty service.
The headlights were nice, the shipping was excellent, the electrical connections were plug and play as well. The only downside is that the lights are not that great. The light is super bright and has a nice white color, but the light beam itself is very streaky. It looks good in the garage, but on the road it is incredibly hard to see the pavement when driving.
Help from Lori was great. I called Optronic's to see if head lights would fit my Jeep. Person on phone told me they didn't know and offered no additional help. Discovered etrailer carried these so called them. Lori didn't know, so she called Optronics tech support, found out they did, called me back, and placed the order. All was completed within 20 minutes. Lights arrived in 3 days. Good price as well. A COMPANY AND PERSON THAT UNDERSTANDS CUSTOMER SERVICE. Thanks Lori, great job!!
Also worked with etrailer last summer to replace all lights on my enclosed trailer. Upgraded to LED. Had the same excellent service. Thanks etrailer.
The fit and connections were perfect. Delivery was quicker than expected. Installation went quickly. I would use Etrailer again and also recommend.
Not worth the money or wait to get them. Not much brighter than sealed beams and no dimming for the DRL's. Very disappointed.
Works great
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.