Opti-Brite Headlight Conversion Kit - Sealed Beam to LED - 7" Round - Aluminum - High/Low Beam
(11 reviews)
Price: $289.09
Opti-Brite Headlight Conversion Kit - Sealed Beam to LED - 7" Round - Aluminum - High/Low Beam
Item # HLL93HLB-2
Our Price: $289.09
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (11)
- Q & A (0)
- Videos (1)
- Photos
Optronics Vehicle Lights - HLL93HLB-2
- Headlight
- LED Light
- Dual Beam
- Pair of Lights
- White
- Round
- Light Assembly
- Optronics
LED lights replace your vehicle's sealed-beam headlamps for an updated look. Each DOT-compliant light has rear-facing LEDs and metallic parabolic reflectors that create a broad, smooth beam. Powder coated die-cast aluminum housing is rustproof.
Features:
- Conversion kit lets you replace your vehicle's 7" round, sealed-beam headlights with LED lamps
- Lights act as direct replacements for most OEM halogen and HID headlamps
- LEDs are super efficient, ultra-bright, and long-lasting
- 30,000 Hours of life
- Rear-facing LEDs and metallic parabolic reflectors create a broad, smooth beam
- Low-beam and high-beam light patterns
- Low, wide beam covers more of the road
- High beam makes it easier to see at a distance
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows for improved heat distribution
- Impact resistant polycarbonate lens
- Powder coated die-cast aluminum housing is rustproof
- IP67 rated for industry-standard protection against dust and moisture
- Accepts H4 3-blade wiring connector (not included)
- Compatible with 12V DC and 24V DC systems
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
Specs:
- Quantity: 2 LED headlamps
- Dimensions: 7" diameter x 3-1/4" thick
- Light output:
- Effective lumen: 1,722 lumens
- Raw lumen: 2,460 lumens
- Diodes: 22
- 11 Diodes per life
- Power draw:
- 12.8V: 0.84 amps
- 24V: 0.38 amps
- Lifetime warranty on LEDs
HLL93HLB Optronics Opti-Brite Sealed Beam LED Headlight Kit - 7" Round - 11 Diodes - Aluminum - High/Low Beam - Qty 2
This Product Fits The Following Vehicles
- 2018 - 2018 Jeep JK Wrangler
- 1997 - 2006 Jeep TJ
- 1997 - 2017 Jeep Wrangler
California residents: click here
Video of Opti-Brite Headlight Conversion Kit - Sealed Beam to LED - 7" Round - Aluminum - High/Low Beam
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Opti-Brite Replacement Headlamp Installation - 1976 Ford F-250
Speaker 1: Today on our 1976 Ford F250 we're going to be taking a look at showing you how to install the 7" Optronics replacement headlamp for optibright sealed beam to LED conversion kit, part number HLL93HLB.Also, available in a pack of two with part number HLL93HLB-2.This is what our lights are going to look like when they're installed. What these are going to do is they're going to replace your old worn out lights with a more high quality, efficient light.These lights are going to offer read facing LEDs and a metallic, parabolic reflector, which create a broad smooth beam.These lights are going to be a seven inch. They are goin to offer a 30,000 hour life span. They have a high and low beam built in. These are going to have a durable surface mount technology construction of LED circuit board, which better withstands shock and vibration and allows for improved heat distribution.There are going to work with 12 and 24 volt DC systems. Dicast aluminum housing, which is rust proof.
They're also going to be DOT compliant.With a Phillips screw driver we're going to have three screws that are going to remove this retaining ring. You want to retain these screws because we're going to be putting them back in.We'll pull our light out like this and on the back side, we're going to have a three prong plug. My hand was a little bit too big to get in there so I just use the end of the screw driver just to kind of pull it off enough where I can fit it back there.Now I'm just cleaning this plug off. If it's too bad you can replace them. This plug doesn't look bad it just looks like it's got a lot of dirt on it.
I'm just taking a little screw driver and just scraping it off. Try to keep the screw driver away from your connection there.One thing that I'm going to suggest, if you're going to be putting new lights in, if these are the original rings that are on your lights, I would suggest replacing them. These tabs are just held on by a little bitty weld spot and if there are old these will fall off very easy.This is the only thing that holds your headlight into that housing. Get our light plugged in and it's going to plug in to your existing wiring. Then take our new ring, reinstall our screws for our ring.
Go ahead and tighten them up.You'll notice right here at the top it's going to say top so you know where the top of the bulb is. So you know which way when you put them in, which side is going to be the top.That'll do it for the Optronics 7" replacement headlamp for optibrights sealed beam to LED conversion kit, part number HLL93HLB on our 1967 Ford F250.
Customer Reviews
Opti-Brite Headlight Conversion Kit - Sealed Beam to LED - 7" Round - Aluminum - High/Low Beam - HLL93HLB-2
Average Customer Rating: 4.1 out of 5 stars (11 Customer Reviews)
LED lights replace your vehicle's sealed-beam headlamps for an updated look. Each DOT-compliant light has rear-facing LEDs and metallic parabolic reflectors that create a broad, smooth beam. Powder coated die-cast aluminum housing is rustproof.by: Robert L.11/14/2019
The headlights were nice, the shipping was excellent, the electrical connections were plug and play as well. The only downside is that the lights are not that great. The light is super bright and has a nice white color, but the light beam itself is very streaky. It looks good in the garage, but on the road it is incredibly hard to see the pavement when driving.
by: David E02/20/2020
Jeep
Help from Lori was great. I called Optronic's to see if head lights would fit my Jeep. Person on phone told me they didn't know and offered no additional help. Discovered etrailer carried these so called them. Lori didn't know, so she called Optronics tech support, found out they did, called me back, and placed the order. All was completed within 20 minutes. Lights arrived in 3 days. Good price as well. A COMPANY AND PERSON THAT UNDERSTANDS CUSTOMER SERVICE. Thanks Lori, great job!!
Also worked with etrailer last summer to replace all lights on my enclosed trailer. Upgraded to LED. Had the same excellent service. Thanks etrailer.
by: Kevin03/22/2020
My fire department is purchase a new Pierce fire truck. LED headlights from Pierce are over $1500, our salesmen recommended I buy some online instead. I did some research and found these headlights to be the best bang/buck for quality and price. I first installed them on our 1994 Pierce fire engine and have installed another set of Low and Hi beams on our 2014 Pierce fire engine, a third set will be ordered when we take delivery of our 107' Pierce ladder truck. The lights look great and throw off a nice bright white compared to the yellow of the old sealed beams. The only reason I cannot give these 5 stars is that they are not plug and play. I had to re-pin the wire plugs in order for these to work on both fire engines. After installing the first pair I thought maybe in was a fluke but when I had to switch the same wires on another fire engine that is 20 years newer I knew it was not a fluke. Not a big deal, if you have a test light and are only moderately handy its an easy fix. But for someone just looking to swap a bulb it is more involved then that.
by: Lt Rudy12/22/2020
These headlights were a great upgrade for our fire engine. We have to engines, both with LED high and low beams. Zero issues and nice bright white lights. We even ordered a 3rd set for our brand new fire truck. Pierce wanted over $1000 to upgrade to LED headlights so we did the upgrade ourselves for less than half the cost!
by: Cj08/04/2023
Does not hold up well. Lifetime warranty but takes forever to get replacements. I have chosen to go to other brands with better warranty service.
by: Jim M10/18/2018
The fit and connections were perfect. Delivery was quicker than expected. Installation went quickly. I would use Etrailer again and also recommend.
by: Dale04/30/2018
Not worth the money or wait to get them. Not much brighter than sealed beams and no dimming for the DRL's. Very disappointed.
by: Carlos02/10/2022
Works great
by: Scott 04/24/2023
by: Dave 10/07/2021
by: Mike 03/03/2021
11
11
See what our Experts say about this Optronics Vehicle Lights
- Will the Opti-Brite Headlight Conversion Kit Part # HLL93HLB-2 Fit a 2005 Jeep WranglerYes, the Opti-Brite Headlight Conversion Kit part # HLL93HLB-2 will fit your 2005 Jeep Wrangler. The conversion kit has both high and low beam headlights with a 30,000 hour life. Each light has 11 diodes which will provide greater visibility over the stock headlights on your Jeep.
view full answer... - Overall Brightness of LED Conversion Headlights Compared to OEM on 2015 Jeep Wrangler UnlimitedThe 2015 Jeep Wrangler Unlimited uses a different style connection than the Opti-Brite Headlight Conversion Kit - Sealed Beam to LED - 7" Round - Aluminum Housing # HLL93HLB-2. To get a light that has the wiring conversion you need, I recommend the Vortex Headlight Conversion Kit - Sealed Beam to LED w/ Halo Ring - 7" Round - Chrome # XIL-7RDKITJK. The converter is an important part of the conversion from Factory wiring to LED. We don't currently have a wiring converter for the Opti-Brite...
view full answer... - LED Sealed Headlight Conversion Kit 7 Inches Round Compatibility with H4 PlugThe Opti-Brite Headlight Conversion Kit - Sealed Beam to LED - 7" Round - Aluminum Housing # HLL93HLB-2 have both high and low beam built in. The 3 blade wiring connects to the H4 wiring present in many vehicles as the OEM wiring.
view full answer...
Do you have a question about this Vehicle Light?
Info for this part was:
Video Edited:
Jacob T
Written by:
Amy B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert L.
11/15/2020
Honestly I tried a couple of different things but the light pattern on both lights were not solid, more of a streak pattern. They are currently being stored in my tool box to hopefully be used successfully in another project.