Center Hanger for 3" Wide Slipper Springs - 4-1/8" Tall - 1-1/8" Bolt

Video Transcript for Review of Dexter Trailer Leaf Spring Suspension - Center Hanger Slipper Spring - 29-43-2

Hi everybody, Andy here with etrailer.com, and today we're gonna take a brief look at this center hanger for three-inch wide slipper springs. This center hangar is going to work with multi-axle trailer suspension systems that have three-inch slipper springs, and this is configured as a center hanger and it suspends your equalizer on tandem or triple axle trailers. This is designed for trailers with 10,000 pound and 12,000 pound Dexter axles. And the holes that are located here on the top are for spot welding, and each of these holes have a diameter of 5/8 of an inch and they are separated on center by 2 3/4 inches. The diameter of our hole is 1 1/8 inches so this will work with 1 1/8 inch in diameter bolts and those bolts are sold separately, but they can be found here at etrailer.com. And measuring the height of this hanger, measuring from the center of our hole to the top, you can see we're sitting right at 4 1/8 inches.

Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.