Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $171.59
Confirmed to Fit
2014 Chevrolet Malibu
LTZ
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (252)
- Q & A (0)
- Photos
2014 Chevrolet Malibu - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Roadmaster
- Universal
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed vehicle
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (252 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Edward 05/16/2024
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: Juan09/15/2021
2013 Subaru Forester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Janes01/10/2024
Easy instructions and works great!!!
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: Tom F09/10/2023
2020 Jeep Wrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Matt09/03/2022
I ordered base plates and the wire harness, the wire harness would not allow for brake, running, and turn signal lights, I had to omit one, the turn signals. The base plates where difficult, requires removing the front of the car. the video did not state the distance front to rear, I was a half inch to far forward and the fog light would not fit.
Jenny N.
9/20/2022
You mentioned that the harness would not allow for the brake, running and turn signal lights. For vehicles that have separate turn and brake lights, this kit will cause your brake lights to function as both brake and turn signal lights. This is perfectly fine. If you want to have both separate turn and brake signals, then you will need part # 118158 and part # RM-792 to do so.
by: Neal 04/08/2023
2023 Jeep Wrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
25
252
Show More Reviews
See what our Experts say about this Roadmaster Flat Tow Wiring Harness
- Recommended Flat Towing Components For A 2023 Ford Ranger
I have a 2023 Ford Ranger thatYou picked out some great parts so we'll go through each to ensure they're right for your 2023 Ford Ranger. The Blue Ox Base Plate Kit # BLU77XR and Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates # RM-677 are a great tow bar and baseplate combo. Since the Nighthawk tow bar comes with the 6-pole socket and cable you won't need the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7, and instead would...
view full answer... - Complete Flat Towing Setup For A 2018 Ford Expedition LimitedSure thing! To complete your flat tow setup for your 2018 Ford Expedition, you will also need: 1. A base plate kit, like the Roadmaster Direct-Connect Base Plate Kit # RM-524457-5. You'll need a base plate kit to connect your tow bars to your toad vehicle. 2.The next thing you're going to need is a braking system, like the Roadmaster BrakeMaster System w BrakeAway for RVs w Air or Air Over Hydraulic Brakes # RM-9160, with the RoadMaster BrakeMaster Custom Seat Adapter # RM-88318. A...
view full answer...
- Can A 4-Pole Wiring Harness Be Spliced Into A 6-Pole Socket To Flat Tow A 2013 Honda Fit While it is possible to cut the 4-pole connector off of the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56302 and wire it into a 6-pole socket, you would be doing yourself an IMMENSE disservice using any kind of plug-in tow bar wiring as they consistently fail. We get A LOT of troubleshooting questions here for plug-in kits and it always ends up requiring a complete replacement of the wiring harness because with these kits the parts are not replaceable. Save yourself the...
view full answer...
- Parts Needed to Flat Tow a 2021 Ford RangerYou will need to start with base plates, I recommend the Blue Ox Base Plate Kit, # BLU77XR. This option fits all trim packages of the 2021 Ford Ranger and mates to the Blue Ox Avail Non-Binding Tow Bar, # BX7420 that you are interested in. It also comes with the needed safety cables. You will also need a lighting solution to tie your Ford Ranger's indicator lights to those of your 2021 Odyssey Motor Home when towing. For this I suggest the Roadmaster 4-Diode Universal Wiring Kit, #...
view full answer... - 2015 Jeep Cherokee Limited Flat Tow Wiring Harness for Preventing Death WobbleAccording to my contact at Roadmaster, you'll need the 68321424AD harness which you can obtain from your Jeep dealer. The harness will prevent the so called 'Death Wobble' from occurring when flat towing the vehicle. To flat tow your Cherokee, you'll need a tow bar, base plates, taillight wiring, safety cables, a supplemental braking system and possibly a high/low adapter. For a tow bar, I'd recommend the Blue Ox Ascent, part # BX4370 which includes the safety cables. For base plates,...
view full answer... - Complete Flat Towing Setup for a 2015 Jeep Grand Cherokee Using a Roadmaster Falcon 2 Tow BarSure! The last couple remaining items needed is a base plate kit compatible with your Falcon 2 tow bar, like the Roadmaster Direct-Connect Base Plate Kit # RM-521440-5, a braking system like the Demco Air Force One Supplemental Braking System for Motor Homes with Air Brakes - Proportional # SM99243, and a wiring kit like the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7. From here, you'll have everything needed to flat tow your 2015 Jeep Grand Cherokee behind...
view full answer... - Parts Needed to Flat Tow 2020 Jeep WranglerFor a 2020 Jeep Wrangler with a standard factory bumper, the first thing you will need is the etrailer # e98948 Base Plate Kit so you can hitch to your Jeep. Add to that a tow bar. I would recommend the Roadmaster # RM-522 All Terrain – Non Binding tow bar. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. The tow bar is the one point in flat towing that gets the most stress and wear....
view full answer... - Recommended 6 to 7-Way Umbilical Cable for 2006 Honda ElementWe have just what you're looking for in the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles which has a 7-way for the tow vehicle side and a 6-way for the towed vehicle side. It has not only the umbilical that goes between but also the wiring and didoes you need to hook up and control the lights on the vehicle. It's offered in both a straight cable as part # RM-152-98146-7 and coiled cable as part # RM-15267. The straight cable is used when you have a tow bar with channels for...
view full answer... - Flat Towing Package for 2022 Jeep CherokeeYou'll need a tow bar, base plates, safety cables, wiring for the taillights, a supplemental braking system, and possibly a high/low adapter if the installed height of the base plates has a height difference compared to the motorhome hitch greater than three inches. I'll link to an article that shows how to measure for the height difference, along with a listing of our available high/low adapters. For a tow bar, I'd recommend the Roadmaster Falcon All-Terrain tow bar, part # RM-522 along...
view full answer... - Can a 2023 Subaru Crosstrek Be Flat TowedThe 2023 Subaru Crosstrek can be flat-towed with all four wheels down. That said, models with a CVT transmission are limited to a traveling speed less than 20 mph and distance less than 31 miles according to the manual. Therefore, you can really only flat-tow the MT models. The ignition switch should be in the "ON" position. If you would like further clarification, see page 9-16 of your owner's manual. I have attached a list of parts below as well if needed. Roadmaster Direct-Connect Base...
view full answer... - Parts Needed to Flat Tow a 2015 Chevrolet Silverado 3500Yes, we do have a tow bar that is capable of towing your 2015 Chevy Silverado 3500 Dually. It is the Blue Ox Apollo Non-Binding Tow Bar - Motorhome Mount item # BX7470. This tow bar mounts to a 2-1/2" hitch and has a 15,000 lbs weight capacity. The non-binding latches make it easy to disconnect no matter what the angle or terrain you are on. It includes safety chains. You're also going to need a base plate kit, wiring kit, and a supplemental braking system. You could possibly need a high...
view full answer... - Roadmaster Direct-Connect Base Plate Compatibility With A Roadmaster Falcon Tow BarYes, the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521451-5 you mentioned will fit your 2022 Jeep Cherokee Trailhawk. This base plate is also compatible with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422. If you're interested in completing your flat towing setup, you're also going to need: -A wiring kit, Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7, -A charge line kit, Roadmaster Battery Charge Line Kit for Towed...
view full answer... - Recommended Baseplate For A Jeep Grand Cherokee Overland Edition If you own a 2022 Jeep Grand Cherokee Overland that is a WL Generation then you will need the Roadmaster Direct-Connect Base Plate Kit # RM77ZR. If you own a WK Generation then you'll need the Roadmaster Direct-Connect Base Plate Kit # RM-521440-5. Your tow hooks would need to be removed to fit the baseplate. If you haven't already picked out the rest of your flat towing components then I have the following recommendations: Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect...
view full answer...
- 2021 GMC Yukon XL AT4 Flat Towing ComponentsI checked the owner's manual for your 2021 GMC Yukon XL, and yes, it is perfectly fine to flat tow. That being said, you are going to need these components: - A base plate - Tow bars - Braking system - Tow bar wiring - High-Low adapter For a base plate, we carry the Blue Ox Base Plate Kit # BLU58FR. This base plate kit is specifically made to be used on your AT4 model of your GMC Yukon XL and will work great for you. The next thing you'll need is a tow bar. Since your Yukon XL is fairly...
view full answer... - Flat Tow Set Up for 2022 GMC Yukon XLGreat question, we have all that you need to flat tow your 2022 Yukon XL Denali. I will list the items then the details. Blue Ox Base Plate Kit - Removable Arms # BLU58FR. Blue Ox Avail Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10,000 lbs # BX7420. Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional # SM99251. Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. Deka Lead Quick-Disconnect Battery Terminal...
view full answer... - Can I Use a Tow Dolly to Flat-Tow My 2022 Ford Ranger 4x4?I went ahead and confirmed with your Ford owner's manual that you can only flat-tow your 2022 Ford Ranger 4x4 by flat-towing it with all four wheels on the ground. You can potentially damage the truck/void any warrantees if you attempt to use a tow dolly with your Ranger. With that being said, we have a great selection of parts for your Ranger to flat tow it. For the recommended setup, I suggest the following: - Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-524459-5 -...
view full answer... - Recommended Equipment for Flat Towing 2022 Ford F-150 Behind MotorhomeYou'll need a tow bar, safety cables, base plates, taillight wiring, a supplemental braking system and possibly a high/low adapter if the height difference of the receiver hitch on the motorhome and the installed base plate is greater than 3 inches. For a tow bar, you can't go wrong with the Roadmaster Falcon All-Terrain, part # RM-522. The tow bar is non-binding so it won't lock up if you're on uneven pavement when you hook or unhook your vehicle and the arms will self center as you pull...
view full answer... - Base Plate Kit for a 2022 GMC CanyonCongrats on the new truck! I recommend the Blue Ox Base Plate Kit item # BLU93FR for your 2022 GMC Canyon. This is compatible with your Blue Ox Avail Tow Bar item # BX7420. It has removable arms that offer a seamless look when you're not flat towing. I also recommend the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord item # RM-152-98146-7. This kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your...
view full answer... - Parts Needed To Flat Tow A Ford F-150I can help you out, look below to find a list of the items you need to flat tow your vehicle: ****Blue Ox Base Plate Kit - Removable Arms # BLU33FR. ***Blue Ox Avail Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10,000 lbs # BX7420. **Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional # SM99251. *Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. These are the key components you need to flat tow your vehicle,...
view full answer... - Equipment Needed to Flat Tow 2022 Ford Escape Behind MotorhomeSome models of the 2022 Ford Escape are capable of being flat towed. Per the owner's manual: • Gas powered FWD models can be trailered or Dolly towed using a tow dolly like the Demco # DM9713045 Kar Kaddy SS. They cannot be flat towed. • Gas powered AWD models can't be flat or dolly towed, only trailered. • Hybrid and PHEV models can be flat towed with all 4 wheels on the ground, follow the specific instructions in the owner's manual. If your Escape can be flat towed, you'll...
view full answer... - Comparing Blue Ox Base Plates And Complete Flat Towing Setup For A 2012 Chevrolet CruzeThe only difference between the Blue Ox Base Plate Kit # BX1698 & # BX1695 which is NLA from the manufacturer, is that # BX1698 will work with the RS models of the Chevrolet Cruze, whereas # BX1695 will not. For your 2012 Chevrolet Cruze, the Blue Ox Base Plate Kit # BX1698 will work great for you. If you're looking for a complete flat tow setup, you're also going to need: -A set of tow bars like # e47ZR. -A braking system like # RM-9060. -A wiring kit like # RM-152-98146-7. & You're...
view full answer... - Equipping a 2020 Jeep Grand Cherokee for Trailer and Flat TowingLet's begin with a hitch and trailer wiring for towing your RV with the Jeep Grand Cherokee. For a hitch, I'd recommend the Curt Class III hitch, part # C13182. You'll also need a ball mount and a trailer ball, provided in the # 989900 etrailer ball mount kit. For a brake controller, I'd go with the Curt # C51180 Echo Wireless Brake controller. The Echo will communicate wirelessly with your smart phone, which you'll use to control the braking action of the trailer. For a vehicle equipped...
view full answer... - Can the Roadmaster Stowmaster Tow Bars Be Used With A Smittybilt Bumper With A Winch?I do have another option, however the Roadmaster StowMaster Tow Bar - Car Mount - 2" Ball # RM-501 that you mentioned is not going to be compatible with your Smittybilt bumper with a winch. Instead, you're going to need to use a different tow bar, like the: -Roadmaster Falcon 2 Tow Bar - Motorhome Mount # RM-520, with the d-ring adapters like # RM-035-1. You will need to also verify that your bumper is flat towable as well. You can do this by contacting Smittybilt and provide them your...
view full answer... - 4 Diode Tow Bar Wiring Kit for 2009 Chevy SilveradoThe Blue Ox 4 diode kit part # BX8848 that you referenced is a fit for your 2009 Chevy Silverado to use as tow bar wiring. We do have the kit part # RM-152-98146-7 also that comes with everything you need including a connectors for the front of the tow vehicle and a cable to connect accross the tow bar. This is the more complete solution that I would recommend over the Blue Ox.
view full answer...
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
3/3/2023
no issues after 10K miles super happy with this product