To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
The crossbar-style hidden brackets attach to your vehicle's frame to provide attachment points for your tow bar. The visible portions of the brackets can be removed when you are not towing.
Features:
The square drawbars, or front arms, on the crossbar-style base plate kit are simple to mount and remove, easily securing with hitch pins. Once the drawbars have been removed, the remaining brackets are virtually invisible. On most automobiles, the brackets are mounted within the grille, where they remain not only unseen, but protected from scrapes and scuffs as well.
Average Customer Rating: 4.8 out of 5 stars (988 Customer Reviews)
The crossbar-style hidden brackets attach to your vehicle's frame to provide attachment points for your tow bar. The visible portions of the brackets can be removed when you are not towing.
Great value, great fit, very easy and simple installation. Although I wish there were 2 choices for size of receiver. I had to buy an adapter for 2” receiver and it protrudes farther than I’d like. Great company and free shipping
I bought the 118-15 XL bracket kit to install on a new-to-me 1997 Geo Tracker. I previously owned and towed a 2005 Jeep Liberty so I had the Roadmaster Stowmaster tow bar and associated equipment. Of course the mounting brackets are model specific so the ones on the Jeep would not fit the Tracker. This installation went well and the parts fit the frame as expected. I took both front wheels off in order to access the area and loosened the lower part of the bumper. You need some fairly long drill bits to drill the 1/2" holes in the frame but I was able to do it with what I had on hand. Also, there is a manufacturing boss inside the frame that gets in the way of sliding the inner holding plate easily. If you tilt it slightly to raise the outside edge it clears the boss and lines up with the drilled hole. This bracket kit is well designed and when the actual mounts are not installed the front of the Tracker looks stock. I have not towed the Tracker yet but I expect the system to work well.
I received great service from e trailer they did every thing too make sure I was ordering the parts that I needed I have not installed them yet but they look like they will fit
Don't believe the 3 hour install time, took me close to 5 hours but once it was installed it looked great!! It would help if there was a picture from underneath of the product already mounted on the car. But for this old do it your selfer I am very satisfied with the quality and the appearance of this product!
WORKED PERFECT
I was pulling my truck using the roadmaster crossbar and to my surpass the towbar broke in half as I was towing. Good thing I was in town only going 20 miles poer hr.
etrailer service is and has always been stellar. My order was correct and was delivered very quickly. The only reason I made this a four instead of a five was that the rear bolt position of both base plate brackets where welded on crooked. Each small plate was at a different angle from each other. In my opinion whoever welded them wasn’t paying attention to quality control. Because I was on a time crunch for my departure on a trip and could not wait for replacements (and I needed the vehicle for local driving) I made the brackets work. Other than that the installation went smoothly and I was able to test tow my 2004 CRV a couple of times without incident.
Base Plate kit was complete and generally straight forward to install. Some instructions and dimensions were not explained in detail as they could have been. Especially the modifications made to the air dam were totally off. Most of the air dam is cut off to fit in front of the base plate. This was installed on a 2014 Chevy Captiva four cylinder car.
Very impressed that they're the exact fabbed fit, and easy to install! These tow base plates are super sturdy!
Item arrived earlier than predicted after viewing a very complete tracking system. The information was very clear and precise. Good job! I am 75 years of age and installed the baseplate myself. Only a couple of minor issues. One pin would not insert. Welding blob in the way. Filed it smooth and problem solved. The video was excellent but was a bit different in that it showed a different method o rear bolt installation, however the instructions on paper showed the correct way. Reinstalling the front clip had presented some difficulty. I suggest really watching the inner fender position relative to the front clip before removal. All said all went well. The finished look is great, (see pictures). Great product!
Quick and easy install. Did not need to drill any holes.
Installed this base on a 2003 Chevrolet Tracker ZR-2.
Highly recommend this towing base.
Item arrived very quickly. It appears to be of excellent quality. The salesman that helped me was very good and had very good knowledge of the product. The installation instructions were a bit vague, but I was able to figure them out. The price of the item was a bit higher than I was expecting.
Highly recommend E-Trailer for all of your towing accessories. Great product, great customer service!!
I've towed with it many times and Zero problems. I did find that moving the car slightly forward after stopping helps relax tension amd.make.disconnect much easier. Overall... I'd say SUPER..!!
Timely receipt and the installation was accomplished easily after watching the video.
Looks great installed. I think it will work perfectly for towing my F150 4x4. Took approximately 1 hrs. I removed the bumper, 4 bolts, and installed effortlessly. Nice appearance!
Just completed a 6600 mile rod trip, towing the Subaru behind a motor home.
Worked great.
This base plate was installed on a 2008 Kia Spectra. The bracket is strong and not really hard to work with HOWEVER,,,,,,,,,, I am used to the BlueOx base plate which is much easier to "hook up". Unfortunately, BlueOx did not make a base plate to fit my vehicle. That is not a big problem as I'm usually not in any hurry and it only takes maybe 5 minutes longer to "hook up".
The biggest problem with the RoadMaster base plate is that due to the way it is bolted to the frame, it only allows for a 6-inch ground clearance on the front of the vehicle. I have to be very careful with any "dips" in the road, especially on cross streets. Six inches may not sound like much but since the tires are several feet behind the base plate, it reduces that ground clearance greatly. It also will not clear the concrete "stop blocks" in front of many parking spaces.
If you are not very careful and keep this in mind, you may likely bend the frame of your car when you come to one of these sudden impacts. I haven't bent anything yet but it has certainly been shocking when it hits. Most of the time, the impact will cause the base plate to scrape and lift the car to the height to clear the obstacle.
I've attached a picture with a ruler in the view.
It was easy to install, fit well and came with good instructions.
Good information and prompt shipping.
Base plate is solid and install and use instructions are excellent.
Be warned that product install is drill two holes and install 3 bolts, BUT the entire front panel has to be removed and replaced. Not difficult, but time-consuming.
Seat bracket is solid and install and use instructions are excellent.
Brakemaster kit is good quality, but instructions are not as good as most Roadmaster products. Instructions for air line install are especially weak.
The baseplate and crossbar arrived one day earlier than expected. Directions were included which made the installation pretty easy.
I am happy with etrailers products and will buy from them again.
Everything looks good for us, but we have one more part that we are waiting on before we can install on the truck plus it's raining out here in Washington State. when it's time to put it all together we will take a picture and send it.
Needed these for my 4Runner. Had to do a bit of grinding on the frame rails to get em to fit. I suspect just different year manufacturing tolerances. All in all, pretty easy to install if you are even semi mechanically inclined. Havent towed it yet but got all the bits and pieces and to fit together just like it should. Easy to remove and good clearance underneath
Installed on a 2010 Ford Ranger Sport 2wd
Have towed over 10000 and not one issue. I did the install without one issue, picture perfect, I did use a online video to get a general idea of install otherwise I primarily used manufacturer's. . Be sure to use the recommended/ required locktite product.
Enjoy!!!
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.