Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails - Aluminum and Vinyl - Black

Pace Edwards Tonneau Covers - PE45CV

Retractable tonneau with T-slot rails lets you add a ladder rack or roof rack to your vehicle. Aluminum slats and vinyl top layer offer strength and security of a hard cover with seamless look of a soft cover. Cover locks at any point along rails.

Features:

• Custom-fit, retractable tonneau cover protects your cargo and your vehicle's bed from the elements
  • Fits over most 5th-wheel trailer hitches
• Explorer Series rails with T-slots let you add a ladder rack or roof rack
  • Adjust your ladder rack or roof rack at any point along T-slots to haul different types of cargo
  • Compatible with Pace Edwards Utility Rig and Contractor Rig ladder rack (sold separately)
• Retractable design offers full bed access without removing cover
  • Quick-release handle automatically retracts cover when turned
  • Tension spring allows cover to open smoothly
  • Stored cover won't restrict rear window visibility
• Integrated pull strap lets you deploy cover quickly
  • Cover engages the rails at 12" intervals so you can partially cover long items
• Key latch lets you lock cover at any point along the rails for customized cargo protection
  • Closed, locked cover secures truck bed when used in conjunction with locked tailgate
  • 2 Keys included
• Canister protects retracted cover from the elements
  • Angled design allows for maximum useable cargo space in bed
  • Drain tubes funnel water from canister out through hole in truck bed floor
• Low-profile cover sits inside truck bed rails for a flush look
  • Aerodynamic style reduces wind drag and helps to improve gas mileage
• Black vinyl fabric bonded to rigid aluminum panels offers a seamless, stylish look
• Weather-resistant materials keep water and debris from entering the truck bed
  • Foam seal installs under rails and canister at bulkhead
  • Large seal at the rear of the bed closes gap between the cover and tailgate
• Easy, no-drill installation
  • Cover clamps to truck bed side rails
  • Canister attaches to cover rails at cab
• Made in the USA

Specs:

• Canister dimensions: 9-1/4" tall x 9-3/4" deep
• 5-Year warranty

The JackRabbit retractable hard tonneau cover with Explorer Series rails lets you add a ladder rack or roof rack to carry cargo above your bed without interrupting the cover's function. Its durable ArmorTek construction consists of a vinyl fabric top sheet that is bonded to rigid aluminum panels, combining the seamless appearance of a soft tonneau with the security features of a hard tonneau. The stylish cover locks at any point along the rails, and it retracts easily with the turn of a handle.

Retractable Cover with Built-In Pull Strap

The original JackRabbit retracts with the turn of a handle. The handle - located on the key latch at the tailgate end of the cover - activates a heavy-duty tension spring. This spring automatically retracts the cover into the canister at the bulkhead of your truck bed. A built-in pull strap helps you extend the cover over your bed. As you pull, the tonneau will engage the side rails at 12" intervals. You can stop the cover at these designated intervals or you can use the key latch to lock the cover at any point along the side rails.

This feature enables you to carry tall or long items that overlap your tailgate while still covering cargo, such as a toolbox, stored closer to the bulkhead of the truck.

A hook-and-loop fastener strip is included to secure the pull strap up and off of your bed floor. You can also use the rear plate of the tonneau cover to pull it closed.

Explorer Series Rails

The Explorer Series rails include T-slots that allow you to mount accessories directly to the cover. This enables you to install a ladder rack or roof rack on the rails and carry cargo above the bed without interfering with the operation of the cover. The T-slots also run the length of the side rails so you can position your ladder rack or roof rack as needed to accommodate different sized loads. The rails are compatible with Pace Edwards Utility Rig and Contractor Rig ladder racks (sold separately).

Angled Canister

The cover retracts into a compact, angled canister located at the front of your truck bed. This canister protects the retracted cover from the elements, and with the cover stored in the canister you'll have unrestricted visibility out of your rear window. The angled design of the canister also allows for maximum clearance for your tools and cargo so there is no need to remove the cover to haul cargo.

Water Management System

The JackRabbit rails feature a water management system that channels excess water into the canister. This prevents water from getting into your bed or freezing in your tonneau cover rails during cold temperatures. Drain tubes attached to the bottom of the canister remove water through the OE drain holes in the floor of your truck bed.

Flush-Mount Design

The black powder-coated side rails mount level with your truck bed rails for a flush appearance. This flush-mount design is aerodynamic to reduce wind drag, and it helps to improve gas mileage when the cover is closed.

Even with the flush-mount design, the cover fits over most fifth-wheel trailer hitches. Note: The highest point of the fifth-wheel hitch must be at least 2" below the bed rails.

Stylish and Heavy-Duty Construction

The JackRabbit deck is constructed of a vinyl top layer bonded to heavy-duty aluminum slats. This ArmorTek deck looks like a soft tonneau cover with no visible seams, but has the strength and security of a hard tonneau cover. A large seal at the rear of the bed closes the gap between the cover and tailgate to create a barrier to prevent water from entering the truck bed.

Security

The original Jackrabbit provides excellent protection for your cargo when used in conjunction with a closed and locked tailgate. The heavy-gauge aluminum panels are better at preventing theft when compared with soft covers that can be cut or punctured with a knife. The panels are also more effective at preventing theft than tri-fold hard tonneau covers because the panels cannot be pried open at any point along the rails.

No-Drill Installation

To install the cover, set the canister in your truck bed and support it with a box or other sturdy object. Slide the cover side rails into the canister until they are fully seated in the rail grips while also threading the cover into the channels in the rails. Secure the rails to the canister with bolts and washers.

Secure the rails to your truck bed side rails using 2 clamps per side. Slide the clamp onto the rail, flip the pivot arm up so it is under the bed rail lip, and tighten the clamp in place. Shims are included for trucks with tapered beds.

Each clamp at the tailgate end of the rails has a supplemental kickstand to help level the rails and prevent overtightening during installation. To install the kickstand, simply slide it into the grip handle at the bottom of the clamp. Rotate the kickstand so the foot rests squarely against the side wall of the truck bed, and tighten in place.

Mount the top cover plate to the canister with the included hardware. Attach the drain tubes to the canister and route each tube out of the OEM drain holes in the floor of your bed.

To hold the pull strap off the floor of your truck bed, apply the adhesive hook-and-loop fastener strip onto the underside of a rail at your desired location.

JEDA24A55 Pace Edwards Jack Rabbit Hard Truck Bed Cover w Explorer Series Rails - Retractable - Aluminum and Vinyl

This Product Fits The Following Vehicles

• 2019 - 2025 Ram 1500 5-1/2 Foot Bed - without RamBox