TireMinder 2-Hose Inflation Kit - 16" to 19.5" Inner Dually - Hand Hole Mount

Video Transcript for Review of TireMinder Tire Inflator - 2 Hose Inflation Kit 16" 16-1/2" 19-1/2" Wheel - TM27SR

Hi, everybody, Andy here with etrailer.com, and today we're gonna take a look at this TireMinder 2-hose inflation kit. These braided steel hoses are going to take the hassle out of inflating and checking the air pressure of your tires on your rear, dual wheels by relocating your inner tires valve stem to your outer wheel, so no more crawling on the ground, or reaching for valve stems on your inner tire. These are going to work on inner tires on 16 inches, 16.5 inches and 19.5 inch dual wheels. And the braided steel construction is going to prevent these hoses from cracking or leaking, so they're very durable, and each hose length is right at about seven inches long. And so these are going to be a very simple hand ball, hand hole, rather, mount installation with the included hardware. And these hoses are going to attach to your valve stems on your inner tires.

And then the brackets are going to mount in the hand hole of your rear wheels. So you are going to receive everything that you see here on the table before me. You're gonna get two brackets and two hoses. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you.

Again, my name is Andy. Thank you for joining me.