Drop Extension Kit for SnowBear Snowplows - Bolt On - 3" Drop

Our Price: $148.53

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

snowbear plow parts frame drop extension kit for snowplows - bolt on 3 inch

Show All (1) Product Images

Show Fewer Product Images

Need help with installation?

Locate installers near me

This drop extension kit lets you use your hitch-mounted or 2-point-mounted SnowBear snowplow with your lifted vehicle by providing a 3" drop for the plow. Great Prices for the best snow plow parts from SnowBear. Drop Extension Kit for SnowBear Snowplows - Bolt On - 3" Drop part number SB324-128 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (1)
Q & A (0)
Related Parts
Photos

SnowBear Snow Plow Parts

This drop extension kit lets you use your hitch-mounted or 2-point-mounted SnowBear snowplow with your lifted vehicle by providing a 3" drop for the plow.

Features:

Drop extension kit lets you use your SnowBear snowplow with your lifted vehicle
- Creates 3" drop for plow to make proper contact with ground
Easy bolt-on installation - no drilling required
Sturdy, steel construction
Powder coat finish provides rust resistance
Compatible with hitch-mounted and 2-point-mounted SnowBear plows

324-128 Snow Bear Snow Plow Drop Extension Kit

Item # SB324-128

Customer Reviews

Drop Extension Kit for SnowBear Snowplows - Bolt On - 3" Drop - SB324-128

Average Customer Rating: 4.0 out of 5 stars (1 Customer Reviews)

Order: This drop extension kit lets you use your hitch-mounted or 2-point-mounted SnowBear snowplow with your lifted vehicle by providing a 3" drop for the plow.

by: Travis11/21/2018 One Year Later

Parts fit we’ll and work as intended.

See what our Experts say about this SnowBear Snow Plow Parts

Do you have a question about this Snow Plow Part?

Height of Front Hitch Receiver for SnowBear SnowPlow
The SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall item # SB324-140 needs to be mounted 9"-10" above the ground. There is an extension kit if your Ford F-250 is lifted or sits to high. It is the Drop Extension Kit for SnowBear Snowplows - Bolt On - 3" Drop item # SB324-128. This bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.
view full answer...
Snowplow for a 2000 Jeep Wrangler with Front Receiver Hitch in Bumper
The first thing you will want to do is check to make sure that you can use a snow plow with the front mount bumper hitch on your 2000 Jeep Wrangler. The hitch will also need to be rated for the weight of the plow itself. Snowbear plow # SB324-080 is a great option. It comes with its own winch to raise and lower the blade. The blade is 82 inches wide and 19 inches tall and there is no restriction on hitch receiver height. This plow weighs 315 pounds. The large holes in the A-frame winch...
view full answer...
Front Mount Hitches for 2007 Jeep Wrangler and 2011 Ford Escape for Snowplow
We have front hitches that will fit your 2007 Jeep Wrangler, like the recommended Draw-Tite # 65069, but these are designed to fit with the standard factory bumper. Since you have an aftermarket bumper you will need to check out the linked installation instructions to try to determine if this will fit with your bumper or not. If it won't then the only way for you to get a front mount hitch on your Wrangler is to have one fabricated. According to SnowBear the max height a hitch receiver...
view full answer...
What Parts do I Need to Mount the SnowBear Plow # SB324-080 to My 2022 Jeep Wrangler?
I have an answer for you to connect the Snowbear # SB324-080 to your 2022 Jeep Wrangler. In the video you are referring to for the Curt Front Hitch - 2" # C31086, that shows the installation of the hitch on a 2018 Wrangler. While we do not have the ground clearance height of the hitch installed on a 2022 model, it most likely differs within a couple inches. Also, since the receiver tube measures 2 inches from inside the top tube to the inside of the bottom tube, the ground clearance is...
view full answer...
Snowbear Custom Mounting Bracket Kit for 2003 Jeep Wrangler TJ
The Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows # SB397-101 is not a fit for your 2003 TJ. The kit you will need is the Custom Mounting Bracket Kit # SB397-010. This is a confirmed fit. You may also be interested in the 5XM5 Universal Cross Member for SnowBear Snowplows - Qty 1 # SB324-060 and the Drop Extension with up to 3" Drop # SB324-128 if you have a lifted TJ.
view full answer...
Difference Between Detail K2 Summit II and Storm II Snowplows
The only difference between the Detail K2 Summit II Snowplow # K2SUMM8826 and the Detail K2 Storm II Snowplow # K2STOR8422 is the actual size of the snowplow. The Summit II is 88" Wide x 26" Tall while the Storm II is 84" Wide x 22" Tall. If the vehicle you plan on using the plow with is the 1989 Jeep YJ you input for your vehicle info then the mounting brackets you need for either of the plows mentioned above come in the Kit # K284115. Let me know if you have a different vehicle and...
view full answer...

Do you have a question about this Snow Plow Part?

Info for this part was:

Expert Research:

Michael H

Updated by:

Wilson B

Written by:

Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.