SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall
(4 reviews)
Price: $2,700.84
SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall
Item # SB324-172
Our Price: $2,700.84
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (4)
- Q & A (0)
- Photos
SnowBear Snow Plow - SB324-172
- SnowBear
- 22 Inch Tall
- Vehicle Snowplow
- Fits 2 Inch Receiver
- 84 Inch Wide
- Wireless Remote and In-Cab Switch
- Adjustable Blade - 5 Angles
- Steel Cutting Edge
- Steel Blade
Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.
Features:
- Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
- Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
- Electric actuator raises and lowers plow smoothly and consistently
- Internal clutch prevents damage caused by attempting to under- or overextend the actuator
- Simple, chain-lifting design has fewer moving parts than a winch
- In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
- Includes a wireless remote control as an alternative to the toggle switch
- Adjustable, 5-position blade can be manually angled left, right, and straight ahead
- Manual release handle is easily accessible from front or back of plow
- Terrain-adjustable design for efficient plowing with less tripping
- Rocking blade pivots up to 6" to allow maneuvering over uneven terrain
- Trip springs and eyebolts are angled so blade rests on ground at correct angle
- Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
- Poly scraper blade attachment (SB324-069 - sold separately) allows you to plow over grass or decorative pavement without worry of damage
- Skid shoes let you adjust plow height to prevent blade from digging into the ground
- Strong rubber deflector allows for better visibility by directing snow away from your windshield
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Rugged and durable, all-steel construction
- Black powder coat finish provides corrosion resistance
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver (sold separately)
- ISO certification ensures consistent, quality manufacturing
- Assembly required
- Made in Canada
Specs:
- Application: 2" x 2" front-mounted trailer hitch receiver
- Blade dimensions: 84" wide x 22" tall
- Height adjustment: 9"
- 5 Blade angles:
- Left 11 degrees
- Left 22 degrees
- Straight ahead
- Right 11 degrees
- Right 22 degrees
- Distance from bumper: 39"
- Actuator lift capacity: 1,000 lbs
- Weight: 380 lbs
- 1-Year limited warranty
Note: Due to the size of this item it ships via truck freight.
The SnowBear Proshovel conveniently slides into your vehicle's front-mounted trailer hitch for easy, convenient mounting. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the Proshovel snowplow has a compact yet strong and sturdy design.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Proshovel snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Proshovel.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.
Add-On Accessories
SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear Proshovel snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.
The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your vehicle's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.
With the caster kit (SB324-126), it will be a breeze to move and store the Proshovel snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.
The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on your lifted vehicle. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.
If you are worried about causing damage to your lawn or pathway, the poly scraper attachment (SB324-069) is perfect for replacing the harsh, steel scraper on the Proshovel. The polymer construction is strong enough to still help plow efficiently, but gentle enough to not hurt your lawn or pathway.
324-172 Snow Bear Pro Shovel Snow Plow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2024 Ram 1500
- 2010 - 2018 Ram 1500 4 Wheel Drive
- 2019 - 2024 Ram 1500 Classic 4 Wheel Drive
- 2019 - 2024 Ram 2500 2 Wheel Drive
- 2010 - 2024 Ram 2500 4 Wheel Drive
- 2013 - 2024 Ram 3500 2 Wheel Drive
- 2013 - 2024 Ram 3500 4 Wheel Drive
- 2010 - 2021 Ram 4500
- 2010 - 2019 Ram 5500
- 2017 - 2020 Nissan Armada
- 2007 - 2009 Chrysler Aspen
- 2007 - 2013 Chevrolet Avalanche
- 2002 - 2006 Chevrolet Avalanche 1500
- 2002 - 2006 Chevrolet Avalanche 2500
- 1992 - 1994 Chevrolet Blazer Full Size
- 1988 - 1999 Chevrolet C/K Series Pickup 1500 - 2 and 4 Wheel Drive
- 1988 - 2000 Chevrolet C/K Series Pickup 2500 and 3500 - 2 Wheel Drive
- 1988 - 2000 Chevrolet C/K Series Pickup 2500 and 3500 - 4 Wheel Drive
- 1988 - 1999 GMC C/K Series Pickup 1500 - 2 and 4 Wheel Drive
- 1988 - 2000 GMC C/K Series Pickup 2500 and 3500 - 2 Wheel Drive
- 1988 - 2000 GMC C/K Series Pickup 2500 and 3500 - 4 Wheel Drive
- 2004 - 2008 GMC Canyon
- 2009 - 2022 GMC Canyon 2 Wheel Drive
- 2010 - 2012 GMC Canyon 2 Wheel Drive - excluding Z71
- 2010 - 2012 GMC Canyon 2 Wheel Drive - Z71 with front stabilizer bar
- 2009 - 2022 GMC Canyon 4 Wheel Drive
- 2010 - 2012 GMC Canyon 4 Wheel Drive - excluding Z71
- 2010 - 2012 GMC Canyon 4 Wheel Drive - Z71 with front stabilizer bar
- 2004 - 2008 Chevrolet Colorado
- 2009 - 2022 Chevrolet Colorado 2 Wheel Drive See All Vehicle Fits
Customer Reviews
SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall - SB324-172
Average Customer Rating: 4.5 out of 5 stars (4 Customer Reviews)
Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.by: Mark12/27/2018
Overall it's a good light duty plow, works like it's supposed to, clears the snow with no problems. Originally purchased the plow with the hitch receiver mount, But the plow stuck out quite a bit in my opinion plus there was to much wobble. So I converted to the 2 point mount which brought the plow in closer and a lot less wobble.
There was an issue with the actuator, it would work intermittently when lowering the plow but Snow Bear covered it under warranty and sent me a new one.
My only gripe is that only after 3 months of Winter use, the whole plow was showing a lot of surface rust and the paint was peeling.
by: Mark01/02/2019
Overall it is a good setup, does the job it's suppose to. Had one problem with the actuator intermittently working when lowering the plow, but was replaced under warranty.
Originally purchased to use in a front mounted hitch receiver, but switched to the two point hookup which brought the plow in closer to the vehicle and made it a little more stable.
My only problem was after 3 months of winter use, paint was peeling and a lot of surface rust showing.
by: Jason01/27/2018
I purchased a SnowBear Proshovel Snowplow and a 2" Draw-Tite Front Mount Trailer Hitch Receiver for my 2001 Ford Explorer Sport Trac. The front mount hitch receiver was a breeze to mount to my vehicle. Literally 15 minutes from start to finish. When the SnowBear plow arrived I was a little apprehensive, as it came in 3 separate boxes and some assembly was required. The directions included were phenomenal, easy to understand and took you through complete assembly step by step. This has been a wonderful experience and I could not be happier.
by: Bob K10/04/2020
Bolted up with little effort. Work's g reat!
4
4
See what our Experts say about this SnowBear Snow Plow
- Will SnowBear Proshovel Snowplow Work on 22 inch Tall Front HitchActually SnowBear does not list a max height range for their snow plows like the part # SB324-172 that you referenced. A 22 inch hitch height like what you have would not be a problem at all for this plow!
view full answer... - Plow Recommendation for 2003 Chevy Silverado with Front Hitch for Plowing Gravel DrivewayFor a plow that is confirmed to fit the front hitch of your 2003 Chevy Silverado 2500HD I recommend the SnowBear Proshovel Snowplow # SB324-172. It measures 84 inches wide by 22 inches tall which means it will take a wide section of snow with each pass and is a taller size which allows for a better plowing angle. This also comes with skid shoes that you can adjust so that you can plow gravel well. Since plowing gravel can be challenging to do without scooping up gravel you will need to...
view full answer... - Replacement 2 inch Shank Recommendation for SnowBear ProShovelThe # SB324-138 is the correct replacement 2 inch shank for the SnowBear Proshovel part # SB324-172 that you have.
view full answer... - Are Skid Legs Included With The SnowBear Proshovel SnowplowIn the video you referenced Randy is using the SnowBear Proshovel Snowplow - 84" Wide x 22" Tall # SB324-172. At the 4:45 minute mark he shows you how to lower the skid legs so that you can unhook and slide the snow plow away from your truck for storage, and goes on to say that you can get the optional casters # SB324-126 as well to make it easier. The skid legs will be included with your snow plow kit but the casters will be a separate item.
view full answer... - Recommended Front Hitch Receiver for Snow Plow on 2017 Ram For your 2017 Ram 2500, the Draw-Tite Front Mount Trailer Hitch Receiver # 65063 is a confirmed fit. This will mount right where your OEM tow hooks are and will bolt easily into place. It will give you a vertical load capacity of 500 lbs and a gross trailer weight of 5,000 lbs with a line pull capacity for a winch of 9,000 lbs. If you don't already have a snow plow compatible, I recommend the SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall # SB324-172....
view full answer... - Front Mounted Trailer Hitch Receiver Compatibility on 2008 Ford F-450 with Boss Snow Plow MountsA front mounted trailer hitch receiver like # C31008 will not fit on your 2008 Ford F-450 at the same time as your Boss Snow Plow Mount. The mounts will interfere with each other, so you will need to swap them when desired as they will not work together. I've attached a photo and video of the mount locations to further assist. You may want to consider the SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall # SB324-172 which would keep you from changing...
view full answer...
- Will the Curt Front Hitch Work On a 2018 Ford F-150 with Eco Boost EngineThe Curt Front Mount Trailer Hitch Receiver part # C31083 will work just fine on your 2018 Ford F-150 with Eco Boost Engine. I checked with both Curt as well as past customers as well to confirm this for you. I have also attached a photo of what the trailer hitch will look like once installed. If you will be using the Curt Front Mount Trailer Hitch Receiver for a snow plow, the SnowBear Proshovel Snowplow part # SB324-172 is what I recommend for this as it has a larger 84" wide blade...
view full answer...
- Front Hitch for 2012 Ram 2500 for Use with SnowBear ProshovelSnow plows that attach to the vehicle by a front hitch like the SnowBear Proshovel # SB324-172 need to have the hitch opening lower than the hitches that fit through the front bumper of your 2012 Ram 2500 like the Draw Tite # 65063 that you mentioned. You'd instead want a lower hanging front hitch with the # 65057.
view full answer... - Lift Capacity and Full Stroke Time for the Replacement 8-Stroke Electric Actuator # SB263-802I reached out to my contact at SnowBear about the Replacement 8-Stroke Electric Actuator # SB263-802 and he said that it has a total lift capacity of 600 lbs and we are looking at 17 seconds with a full load and 3 second no load. Please note that this is specifically made for the Proshovel # SB324-140, # SB324-168, or # SB324-172 or Winter Wolf # SB324-116, # SB324-166, or # SB324-167 snowplows.
view full answer... - Snowplow Recommendation for a 2012 Chevy Silverado 2500HD 4X4To use SnowBear snowplow # SB324-167 you will need to use custom brackets # SB397-111 on your 2012 Chevy Silverado 2500. What I recommend is to use a front mount hitch model, # SB324-172, with front hitch # C31023. This way the overall cost will be lower and you get the same plow and a front hitch that can be used for other accessories such as a winch should the need arise. Everything needed for installation will be included.
view full answer... - Snow Plows and Mount Options for a 2017 GMC Sierra 1500I do have plow options for you but I spoke with my contact over at Snow Bear and they have not yet confirmed a custom snow plow mount kit for the 2017 GMC Sierra 1500 (March 1, 2017). What you can do is use a plow that attaches to a front mount trailer, # C31069, which does fit your truck. With the front mount hitch installed you could then use Snow Bear plow # SB324-172, # SB324-081, # SB324-080, # SB324-168, or # SB324-140.
view full answer...
Do you have a question about this Snow Plow?
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Jacob T
Video by:
Kathleen M
Installed by:
Randy B
Updated by:
Wilson B
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Heather A.
1/10/2019
It is a good idea to spray off the plow with freshwater after using it in the snow and salt. If there are areas on the plow with paint chipping you can spray paint it with a rustoleum type of black spray paint.