Custom Fit Roof Rack Kit With Y00101 | Y00410 | Y01101
(80 reviews)
Price: $413.85
In Stock
Custom Fit Roof Rack Kit With Y00101 | Y00410 | Y01101
Item # Y92ZB
Our Price: $413.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (80)
- Q & A (0)
- Videos (10)
- Photos
Yakima Roof Rack - Y92ZB
- Crossbars
- Round Bars
- 2 Bars
- 66 Inch Bar Space
- Yakima
- Black
- Overhang
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.
Features:
Yakima 66" RoundBar LG:- Sturdy, round crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers, fit kit, and RoundBar SL Adapter (sold separately) to create a complete roof rack
- Accommodate accessories that clamp around the bars
- Optional RoundBar end caps (sold separately) keep out dirt and grime
- Constructed from vinyl-coated, galvanized steel
Yakima 1A Raingutter Towers (4 Pack):
- Clamp onto vehicle rain gutters
- Provide base for Yakima roof-rack crossbars
- Adjust to non-parallel rain gutters
- Are lockable with Same Key System (SKS) Cores (sold separately)
- Cores lock crossbars to towers and towers to vehicle roof
- SKS Cores can be changed out to make all your Yakima locks keyed alike
- Constructed from tough Zytel nylon
Yakima 1A HiRise Spacers:
- Convert standard Yakima 1A Raingutter Towers to HiRise Towers
- Add 3-1/2" of clearance over domed roofs or factory roof racks
8000101 Yakima 1A Raingutter Towers (QTY 4)
8000410 Yakima Round Crossbars - Steel - Black - 66" Long - Qty 2
8001101 HiRise Spacers for Yakima 1A Raingutter Towers
Video of Custom Fit Roof Rack Kit With Y00101 | Y00410 | Y01101
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Installation - 2017 Chevrolet Express Van
Adam: Hi everyone, Adam with etrailer.com. Today we're going to be taking a look at the Yakima round bar roof rack system on our 2017 Chevy Express.This is going to be a great addition to your Express van just because obviously we're going to be able to fit quite a bit of passengers in here, and it's always nice when you're going on vacation and you have a lot of room just to kind of relax on the long drives you may be taking, so luckily we can put either all the gear that they may have with a cargo basket or a cargo box up on top of here, or if you want to carry all your canoes, kayaks, or even a decent amount of bikes you can put them up here as well just so all your passengers will be nice and comfy.These are the 66" round bars that we have on top of our Express van here. They are made of steel with a nice powder coated finish, so they are going to resist against rust and corrosion over time. Also they will have a weight capacity of 165 pounds, but make sure that your Express van can handle that kind of weight.Honestly, with 165 pounds you can use these yes, for all the recreational stuff you may be doing on your vacation, but also for work. You can throw lumber up here, drywall, even a couple ladders. All you got to do is just make sure it's tied down properly and then you're ready to hit the road.So let's do some measurements for your guys.
From our roof to the bottom of our bar we are going to have about 4-3/4", and from our roof to the top of the bar it's going to be a little bit underneath 6", so we're going to have plenty of room to be able to fit even some of those attachments that are going to wrap underneath and around these bars. Even if they are bigger mounting hardware we don't have to worry about it rubbing against our roof.It is relatively easy to install on the roof, so let's just go ahead and show you how. Okay, so the first thing we want to do is we're going to have this little lip here. It's made of plastic. You get a little rubber boot and all you really need to know is you see this little dip right here That's going to be facing up towards our tower.I found it easiest to kind of like just spread it out and get that hole going and then kind of pull it a little bit.
I'm going to have to push that top lip up. Then you do the same kind of thing to the other side. Just make sure it's nice and tight and just flush with this lip. You're going to have to mess with it a little bit to get it to fit on there really good.So now that we have that installed, we are going to want to loosen this bolt here on the underneath. There is a tool included, but once you get it loosened most of the way you can actually just kind of rotate this assembly and that's going to allow our bars to be able to slide in there, because when we tighten it down it's going to push this little black piece up to lock the bar into place.So we're going to take it and this lip that we put the boot on is actually going to sit in this little divot here on the roof.
Seat it down into that little groove there. Then of course this metal part is going to be underneath this lip here.So we can either go ahead and grab the bar or just place it on the other side. If you have a specific bar width that you want to meet, definitely measure all that out. I'm going to put it about here, and I'm going to go grab our round bar.Okay, so you see how these towers are kind of facing inward That is the orientation that we want on both sides, and of course we want those facing the same way as well. This is not right and this is correct.
So that's something to keep in mind. If you have the caps on your round bar already installed, you're going to have to remove them, and I'm actually going to start with this one here. Slide it all the way down. Grab our other one. This might be a little bit easier with an extra set of hands, but I'm going to see if I can get it done all by myself.So now with those on our bar we can gently lay it down, trying to get it into the right spot. If you get one side kind into place you can just kind of lay it down a little bit and then go and fasten and get the other side kind of into place, and then we'll go ahead and fasten them all down.This wouldn't be a bad time to get the measuring tape out, making sure that the distance between the towers on this side and the distance between the towers on that side match.Sometimes if you have a more bubbly roof this bracket that hooks underneath this lip on the back side, it might be rubbing against your roof. We do have extra little rubber bumpers here, so if we are having that issue we can actually just put that on the backs of the bracket to prevent any wear to your paint, but in this instance we are not having any of those issues, so we won't be using them.The next step, we have a little push knob here. It's going to thread into our tower, and as we thread it in it's going to pull the top part of this metal section here back towards the tower, so then the bottom part is going to go into that groove, giving you a secure fit. As you can see, it's doing its thing. You're going to have a decent amount of turns. That should get it pretty tight. Give it a good wiggle. Then you can go ahead and do the same thing on the other side.One thing I do recommend getting is you can get some locking cores so someone can't just come up to this and just undo it and grab your roof rack and run off with it. We do sell those separately at etrailer.com, and you'll get keys with your kit just to give you that added protection.So before we fasten down our round bars here so they're nice and tight we're going to use the fact that they're loose to just make sure that they're even on both sides. You can kind of twist and get them nice and even. You can grab a tape measure if you want, but if you have them where you want them, which I do, you can go ahead and take that same tool that we used to loosen up the bolt and we can actually go ahead and tighten it. So now the only thing we have left to do is install our caps.Well everyone, that's just about all you really need to know about the Yakima round bar roof rack system on our 2017 Chevy Express.
Customer Reviews
Custom Fit Roof Rack Kit With Y00101 | Y00410 | Y01101 - Y92ZB
Average Customer Rating: 4.5 out of 5 stars (80 Customer Reviews)
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.by: steve Z06/16/2012
roof racks showed up in great condition, and showed up as one package.... I should have ordered the J racks from here but I found them cheaper locally so Thule J racks compliment the whole setup and i am just about ready to hit the water :)
by: Barry 02/20/2024
Dodge
Fit the 79 Dodge van perfectly
by: Wayne 12/07/2023
As always E trailer handled my order extremely well. Kept me updated on shipping also. Very professional!
by: Tom03/19/2023
These Yakima towers just work. They go on easily and stay tight. No issues whatsoever. They are a little pricey, but it's nice to have something that just works well without any drama.
by: Luther04/20/2021
The yellow pads on the crossbars are pool noodles secured by zip ties. They provide padding for a third or even a fourth kayak.
by: Blaine 09/19/2021
GMC Terrain
I chose the Yakima A1 raingutter towers for mounting a 96" Yakima crossbar for my Humvee wildfire rig rooftop gear rack. The towers are sturdy and able to handle the constant jarring expected in wild land fire fighting in rugged terrain.
by: Shaun05/16/2020
etrailer never disappoints! Every product I need, I check that etrailer has it before purchasing anywhere else. Thank you for the excellent service, the fast delivery, and the email updates on order status.
by: Jay F.12/21/2013
Did an excellent job guys. The Yakima towers arrived on time and in good shape. Mounted right up to the canopy clips, installed the existing bars, kayak racks, and lock cores without any issues. All is ship-shape now. Will definitely come back to you guys again.
Thanks!
by: Richard09/21/2021
Chrysler
Been using Yakima products for decades. First use as a teen on a 1974 Chrysler Newport for a canoe. Still buying their products. Handing down canoe with Yakima racks for their vehicle. Why change a good combination?
by: Geoffrey04/17/2021
the part is what it is. all prices are similar online. What sets etrailer apart is the customer service. you call and you get an empowered, cheery, competent individual. I had two cancellations I did (not their fault) and they handled both quickly, easily, and with a cheerful disposition. Excellent customer service.
by: Mike01/21/2019
The customer service is exceptional. Nick went above and beyond getting the package out as well as dedicated follow-up. I will be ordering another roof rack for another vehicle. Even the return process was seamless thanks to Shelia. I ordered a tow hitch wiring harness a few months ago and received the same great service. Will continue to do business with etrailer.
by: David 04/17/2020
Got just what I ordered, quickly. Yakima rack system. For 2008 van, now I need to order one more set.
by: Richard 09/21/2021
I have used Yakima products for decades and never have had issues. Even now I still trust them thus still purchase their products. This was for a gift so spreading the product name and trust.
by: Cory 01/21/2023
Amazing customer service!! Had a small issue with shipping to start but after a phone call Noah took care of it right away. Received product just in time for our trip and will be a repeat customer for sure. Thanks so much George, Noah and Carol. Can’t say enough how much I appreciate you.
by: Sparkie06/27/2012
Good 'nuff. Used Yakima for several years for ski racks and bike racks. No disappointments.
by: Todd04/06/2022
Thank again, etrailer. You always have what I’m looking for. I already had the bars, but I needed the towers.
by: Fran11/17/2018
Have owned this set of rack towers on the past 3 pickup trucks I've owned..!! Work very well...!!! I am a contractor and occasionally load them up pretty heavily....!
by: Keith05/10/2020
Jeep
Fits awesome on my 2016 jeep unlimited. Some wind noise but not a problem.
by: Harold05/15/2022
These shipped very quickly and fit great. While I couldn’t get the bars I wanted until August, I was able to get them elsewhere. Thanks for your help. Would have been 5 starts had I been able to get everything from etrailer
by: Marc L07/11/2016
I'm loving the Yakima rack!
by: Eric Petersen06/27/2015
Great product. Installed on my 93 Volvo 240 Wagon with ease. Delivery was super fast too.
by: Craig 09/18/2021
Greg S solved my backorder issue. Greg S was FANTASTIC. Thankyou Greg S
by: NICOLE02/11/2013
Loved shopping with etrailer, thanks for all the help.
by: Josh07/09/2022
Tesla
So far so good. Have had hitch for a year and it’s a game changer. Can reveal it quickly and throw on a bike rack to carry 4 bikes including an ebike. Amazes me that it’s so solid. But it is. And invisible when not in use
I bought a new bottom plastic panel for my Tesla model 3 from Tesla.
25
379
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Parts Needed to Install Yakima Round Bar Roof Rack on 2019 Ram 1500Sounds like you are looking for a way to install a Yakima round bar roof rack on a 2019 Ram 1500 which you'd have to use all Yakima components for since there isn't a way to adapt a Rhino Rack tower to accept a round bar. So you'd need the part numbers # Y00410, # Y28TR, # Y03536, and # Y06135 and you'd be set.
view full answer... - Correct Yakima Round Bar Roof Rack for a 2013 Ram 3500 Crew CabThe Yakima Round Bar Roof Rack for a 2013 Ram 3500 Crew Cab consists of the following parts; Y00410, part # Y28TR, part # Y03536, and part # Y06135. The RoundBar SL Adapters are for BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers. The installation points are fixed and cannot be adjusted.
view full answer... - Does Thule Make Round CrossbarsThule doesn't make a round bar. They are known for square bars and more recently aero shaped bars. Yakima on the other hand is more known for round bars like the part # Y00410 for a quantity of 2 66 inch round crossbars.
view full answer... - Yakima Round Bar Roof Rack Fit on 2018 Ram 1500The part number you mentioned is the same, but you'll actually need different towers for your 2018 Ram 1500 for a Yakima round bar roof rack, which will fit both the Crew Cab and Quad Cab versions of the truck. The exact parts you need to make up the roof rack on your '18 Ram 1500 are the following: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - BaseLine Towers for Yakima Crossbars # Y28TR - RoundBar SL Adapter # Y03536 - BaseClip Fit Kit for Yakima BaseLine Roof...
view full answer... - Will Yakima Accessories Work with Bully Adjustable Ladder Rack for Vans w/ Rain Gutters # CG-903The Bully Adjustable Ladder Rack for Vans with Rain Gutters, # CG-903, uses 2" diameter round crossbars. Although this rack is more economical, the 2" crossbars are too large and will not work with the Yakima accessories. In order to mount Yakima roof top accessories you could go with the Round 66" CrossBars, # Y00410, and 1A Raingutter Towers, # Y00101, for your 2012 Ford Van. These round bars measure 1-1/8" in diameter and accommodate the Yakima accessories.
view full answer... - Can I Mount the Thule UpRide to Yakima Round Bars?Yes you can! The Thule UpRide Roof Bike Rack part # TH599000 comes with both types of hardware. There is hardware for mounting it to the track in the aero type bars and clamps for mounting to the round, square and factory type crossbars like the Yakima Round Bars part # Y00410. Check out the video below it will show you exactly how the clamps work for mounting.
view full answer... - Parts Needed to Install 3-Crossbar Yakima Roof Rack on 1989 Toyota Land CruiserYes, you can use 2 of Yakima Replacement 1A Raingutter Tower # Y8810137 to add a third round crossbar # Y8810025 to the roof of your 1989 Toyota Land Cruiser. You will want to order the following items and quantities to get your 3-bar rack system. # Y00410 = 1 # Y00101 = 1 # Y8810137 = 2 # Y8810025 = 1 # Y8810136 = 1 These items will give you a total of three bars and six towers.
view full answer... - Will The iKamper 2.0 Fit Yakima CrossBarsAccording to iKamper's website, their product mounts to most cross bars due to its universal design, however since we do not carry their products I can not confirm this. With that being said, since they say it is universal, you can absolutely use the Flexible Track Rack System # Y01127, with the landing pads # Y00221, and the control towers # Y8890027 to mount the iKamper 2.0 on your 2008 Toyota Tundra. Depending how wide your roof is, you can use the 66" crossbars # Y00410, the 58"...
view full answer... - Will Installing Track Roof Rack System on A.R.E. Topper Void WarrantyInstalling a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
view full answer...
- Mounting Brackets for Yakima Raingutter Towers for Roof Rack on TrailerI believe I understand the part you are asking about to install a Yakima roof rack on your trailer, which is the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. Then to complete your set up you will need the Yakima 1A Raingutter Towers # Y00101 as well as the appropriate length crossbars for your trailer, depending on its width. The options are the following: - 48 Inches: Round 48" CrossBars for Yakima Roof Rack System # Y00408 - 58 Inches: Round 58" CrossBars...
view full answer... - Roof Rack for 2021 Jeep Wrangler Unlimited With Sky One-Touch TopI checked with our roof rack manufacturers, and there is one option for a roof rack that fits your 2021 Jeep Wrangler Unlimited with the Skye One-Touch retractable roof. This rack will work and still allow you to open the top so long as you use the recommended spacers. The entire rack for that will work is the following: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You...
view full answer... - Roof Rack and Largest Cargo Basket Recommendation for a 1995 Land Rover Range Rover ClassicFirst you will want to start with a roof rack on your 1995 Land Rover Range Rover Classic. For that you will want the Yakima roof rack that consists of the Round 66" CrossBars # Y00410 and the Yakima 1A Raingutter Towers # Y00101. The absolute biggest roof rack cargo basket that would fit this roof rack would be the Surco Safari Rack 5.0 Rooftop Cargo Basket # SPS5084-Y400.
view full answer... - Adding Yakima Round Bars To 2005 Nissan Xterra Roof RackIt sounds like you are trying to add Yakima round crossbars to the factory roof rack of your 2005 Nissan Xterra. This can be done using Yakima TimberLine Towers # Y33TR and Yakima RoundBar Adapter # Y03536. If you already have Yakima round bars then you are all set. If you don't, then you can add either the Yakima 48" roundbars # Y00408, 58" roundbars # Y00409, or 66" roundbars # Y00410. I attached a demonstration video for you.
view full answer... - 2013 Ram 1500 Crew Cab Yakima Round Bar SystemThe Q-tower fit kit for your 2013 Ram 1500 are the Q-Clips Y00607 which have been discontinued a few years back. The solution now for you to utilize Yakima round bars is the following system: -Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 -BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR -RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536 -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06135
view full answer... - Equipment Needed to Carry Roof Cargo Box and 4 Pairs of Skis on 2013 Hyundai Santa Fe SportIf you used the Thule SnowPack ski carrier, part # TH7324 that can carry 4 pairs of skis or two snowboards and the Thule Pulse # TH615 with its 16 cubic foot capacity, you'd need roof crossbars that have at least 57 inches of space. If your Hyundai Sport has a bare roof, you can install a Yakima Roof Rack that would offer plenty of space for the ski rack and cargo box mentioned above. The rack would consist of the following parts: 66 Inch Long RoundBars, part # Y00410 BaseLine towers,...
view full answer... - Roof Rack or Ladder Rack Recommendation for 1993 Ford F-150The Yakima BedRock Truck Bed Cargo Rack Y01140-78 is not a fit for your 1993 Ford F-150. There is a roof rack available that fits your '93 F-150 that goes over the cab, which is made up of Yakima Crossbars # Y00410 and Raingutter Towers # Y00101. For your truck bed, another option is a standard ladder rack such as the Erickson Truck Bed Ladder Rack # EM07706 which has an 800 lb capacity. The only thing to keep in mind with this rack is that it will not work with a 6-1/2' Flareside or...
view full answer... - Is There a Solution for a Roof Rack on My 2021 Ford F-250 that Doesnt Require Drilling?I have a great no-drilling solution for you. While the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Long # Y01-130B requires drilling, there are options for your 2021 Ford F-250 Super Duty crew cab that do not require any drilling. To go this route, you will need the following parts: - Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima...
view full answer... - Yakima Round Bar Roof Rack Components to Fit 2017 Chevy Silverado 4 dr Crew CabI was able to check with Yakima and while the Q tower racks are no longer made they did tell me that the Q7 clips are the correct ones for your 2017 Chevy Silverado for the front and rear bars. BaseClip 122 is the correct clips for the current Baseline towers but they are not compatible with the Q towers at all. So how can we help? We can offer you the current Yakima setup that will allow you to reuse your round bars but you'll need new feet and clips. The parts needed to install a Yakima...
view full answer... - Do Yakima Artificial Rain Gutters have to be Positioned in a Certain Place on a Truck Camper ShellWhen mounting artificial rain gutters like # Y08002 to a camper shell, there is no specific distance apart they must be placed. What you will want to look at is where you can mount them (the strongest points on the camper shell would be ideal) and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. Just remember that if you place the bars too far back then items on the roof may hang over the back end too much....
view full answer... - Weight Capacity of Yakima Raingutter Mounted Roof Rack on 2012 Jeep Wrangler UnlimitedPer Yakima, a roof rack installed on the Wrangler Unlimited with the # Y00101 Drip Rail Towers will be limited to carrying snow products like ski and snowboard carriers. This is due to the limited capacity of the drip rails and the maximum bar spread of 24 inches. Yakima mentions a maximum allowable weight load of 100 lbs, including the weight of the rack itself.
view full answer... - Yakima Camper Shell Roof Rack Parts for Factory Rails on Snug Top ShellYakima does not produce any square bar roof racks so there is no rack foot part to allow installation of square Thule crossbars to a Yakima track. However we do offer the Yakima Control Towers # Y8890027 (you need 4) and Landing Pad 1 # Y00221 (you need 2) that will allow you to install Yakima round crossbars. Yakima round bars are available in many lengths. 58-inch # Y00409 66-inch # Y00410 78-inch # Y00411
view full answer... - Adding a Roof Rack to a Camper Shell on a 2008 Nissan FrontierThere isn't a pdf of a track fit sheet but basically it wants you to select the tracks that won't be too long to fit your camper shell. It also tells you to be sure to place the tracks equal distance from the rear of the camper shell and from the sides of the camper shell so its centered. The tracks # Y01126 come with the 42 inch tracks themselves and hardware to mount to a metal surface. For a fiberglass camper shell you would need to add cap nut hardware # Y8810155. Then to add crossbars...
view full answer... - Yakima Round Bar Roof Rack for 2019 Ram 3500While we have a way for you to use Yakima round crossbars on a 2019 Ram 3500, it will need to be as a roof rack application, and the reason for that is the BAK Vortrak Hard Tonneau Cover slightly covers the stake pockets of your '19 Ram 3500 and there is no way to add a rack system over the tonneau without interference. There is also not a way to attach those crossbars to the bed of your truck, but what you can do instead, so long as your 2019 Ram 3500 is a Crew Cab or Mega Cab is use...
view full answer... - Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell TracksI spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the width of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411
view full answer... - Will the Rhino-Rack SG Roof Rack for Rain Gutters Fit My 1998 Volvo S90?I have a solution for you. The Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum - Black # RRSG59 will only fit certain models and years of Jeeps. Unfortunately, it will not fit your 1998 Volvo S90. With that being said, there is a roof rack system that is compatible. For this route, I recommend the following parts: - Round 58" CrossBars for Yakima Roof Rack System (QTY 2) # Y00409 - Yakima 1A Raingutter Towers (QTY 4) # Y00101 With this roof rack system, you...
view full answer... - Roof Rack for 2020 Jeep Wrangler 4-Door With With Sky One-Touch Power RoofFor a 4-door Jeep Wrangler, that would mean you have the Unlimited, and by retractable top I believe you are referring to the Sky One-Touch power top that is available on those models. If so, we do have one option for a roof rack that will work with a 2020 Jeep Wrangler Unlimited with the Sky One-Touch top, which is from Yakima and consists of the following parts: - Round 58" CrossBars for Yakima Roof Rack # Y00409 - Yakima 1A Raingutter Towers # Y00101 I confirmed with the manufacturer,...
view full answer... - Will Yakima Accessories Work with Bully Adjustable Ladder Rack for Vans w/ Rain Gutters # CG-903The Bully Adjustable Ladder Rack for Vans with Rain Gutters, # CG-903, uses 2" diameter round crossbars. Although this rack is more economical, the 2" crossbars are too large and will not work with the Yakima accessories. In order to mount Yakima roof top accessories you could go with the Round 66" CrossBars, # Y00410, and 1A Raingutter Towers, # Y00101, for your 2012 Ford Van. These round bars measure 1-1/8" in diameter and accommodate the Yakima accessories.
view full answer... - Can SeaSucker Monkey Bars Be Installed on a 1984 Toyota Celica with Primer Paint and a SunroofHey Mitchell! I really like the SeaSucker Monkey Bars Roof Rack # 298-SX6000B as well since it's so universal, but that primer paint on your 1984 Toyota Celica does make me a little hesitant to recommend it as a valid solution. I tried reaching out to SeaSucker to get their take on a vehicle with only primer and I still haven't heard anything back yet. - UPDATE My contact got back with me and said that primer paint is perfectly fine to work with the Monkey Bars! If you're interested in...
view full answer... - Parts Needed to Install 3-Crossbar Yakima Roof Rack on 1989 Toyota Land CruiserYes, you can use 2 of Yakima Replacement 1A Raingutter Tower # Y8810137 to add a third round crossbar # Y8810025 to the roof of your 1989 Toyota Land Cruiser. You will want to order the following items and quantities to get your 3-bar rack system. # Y00410 = 1 # Y00101 = 1 # Y8810137 = 2 # Y8810025 = 1 # Y8810136 = 1 These items will give you a total of three bars and six towers.
view full answer... - Yakima Roof Rack and Kayak Carrier Recommendation for a 2015 Jeep Wrangler Unlimited HardtopYes you can. I checked with Yakima and the Yakima Raingutter 1A Towers part # Y00101 are confirmed to fit the factory hardtop of your 2015 Jeep Wrangler Unlimited. The recommended crossbars would be the part # Y00409. Yakima says this rack setup has a weight capacity of 100 lbs. You will need to consult your owners manual to determine what Jeep says is your roof capacity and be sure to go with the lower of the two as the overall capacity. For a carrier that can carry up to 2 kayaks...
view full answer... - Available Roof Racks for Various Roof Styles on 1987 Jeep CherokeeWe can help you with a roof rack for your 1987 Jeep Cherokee. The rack fits depend on how the Cherokee's roof is set up. On the linked page just click on the picture that shows your roof style; you will then see only the racks that fit that type of roof. We have options from several brands but none of the roof configurations shows a fit for a SportRack brand roof rack. However, I can help you find the most cost-effective option for each type of roof. If you have a factory roof rack with...
view full answer... - Roof Rack System for 2008 Jeep Wrangler Unlimited with Factory HardtopAccording to Yakima, the drip rails on that factory hard top are not structural. When used in this installation, the crossbars are intended for use with skis or snowboards only. The maximum allowable load would be 6 skis or 4 snowboards. When used within this limited scope, the drip rail mounts will not damage the rain gutter or drip rail. If used for any other purpose, they would most likely be damaged. If you decide to install the Y00101 Raingutter Towers and 58 inch load bars, keep...
view full answer... - Will Side Loader Mounting Brackets for Yakima 1A Towers Install on Vertical Camper Shell SidesI talked to Yakima about this and they said you can install the # Y08002 on the vertical sides of your camper shell. The only thing that may be an issue is the location of your windows. These cannot be installed above a window so as long as you avoid that these will allow you to add your roof rack use the Yakima 1A Raingutter Towers # Y00101. I don't have the bolt hole spacing on the Thule but these are 4-1/8" apart on center so you can see if that matches where you drilled.
view full answer... - Can Yakima Raingutter Roof Rack Work With 2011 Jeep Wrangler UnlimitedThe Yakima roof rack that uses the 1A Raingutter Towers is confirmed as a fit for your 2011 Jeep Wrangler Unlimited. There is no drilling required for installation. The weight capacity of this roof rack is 100 lbs. To order this roof rack you will need part # Y00409, and part # Y00101. The Thule Roof Rack does not require drilling for installation either. This roof rack features steel square crossbars and has a weight capacity of 165 lbs. To order this roof rack you will need part #...
view full answer... - Mounting Brackets for Yakima Raingutter Towers for Roof Rack on TrailerI believe I understand the part you are asking about to install a Yakima roof rack on your trailer, which is the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. Then to complete your set up you will need the Yakima 1A Raingutter Towers # Y00101 as well as the appropriate length crossbars for your trailer, depending on its width. The options are the following: - 48 Inches: Round 48" CrossBars for Yakima Roof Rack System # Y00408 - 58 Inches: Round 58" CrossBars...
view full answer... - Roof Rack for 2021 Jeep Wrangler Unlimited With Sky One-Touch TopI checked with our roof rack manufacturers, and there is one option for a roof rack that fits your 2021 Jeep Wrangler Unlimited with the Skye One-Touch retractable roof. This rack will work and still allow you to open the top so long as you use the recommended spacers. The entire rack for that will work is the following: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You...
view full answer... - Roof Rack and Largest Cargo Basket Recommendation for a 1995 Land Rover Range Rover ClassicFirst you will want to start with a roof rack on your 1995 Land Rover Range Rover Classic. For that you will want the Yakima roof rack that consists of the Round 66" CrossBars # Y00410 and the Yakima 1A Raingutter Towers # Y00101. The absolute biggest roof rack cargo basket that would fit this roof rack would be the Surco Safari Rack 5.0 Rooftop Cargo Basket # SPS5084-Y400.
view full answer... - Yakima Raingutter Mount Roof Rack for a In-Bed Truck CamperThe wide body mounting brackets # Y08001 have a larger surface area in contact with the camper which makes them more stable especially for roof rack systems with very long bars like yours. Based on that I recommend going with the wide body option. For a set of 4 Raingutter towers use # Y00101. The longest bars available are 86 inches long exactly, # Y00420. The towers will lean in towards the center of the truck camper some so that will help you to be able to properly set up this system.
view full answer... - Are Thule Feet Compatible with the Side Loader Mounting Brackets for Yakima Raingutter TowersTo use the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers, part # Y08002, you have to have the Yakima 1A Raingutter Towers # Y00101 as these were designed specifically for these mounting brackets and the Thule feet are designed to work with Thule fit kits. Once you have the brackets and Raingutter Towers in place you can then use the appropriate sized Yakima round bar like the 48" long Round Crossbars # Y00408.
view full answer... - Roof Rack or Ladder Rack Recommendation for 1993 Ford F-150The Yakima BedRock Truck Bed Cargo Rack Y01140-78 is not a fit for your 1993 Ford F-150. There is a roof rack available that fits your '93 F-150 that goes over the cab, which is made up of Yakima Crossbars # Y00410 and Raingutter Towers # Y00101. For your truck bed, another option is a standard ladder rack such as the Erickson Truck Bed Ladder Rack # EM07706 which has an 800 lb capacity. The only thing to keep in mind with this rack is that it will not work with a 6-1/2' Flareside or...
view full answer... - How to Carry a Bike using a Roof Rack on a 1986 Toyota SupraI do have a solution for you to carry a bike on your 1986 Toyota Supra, however, there are no hitches or trunk mount options that will fit. Instead you will have to go with a roof rack. For your Supra the most economical roof rack is the Yakima system using raingutter towers, # Y00101, and crossbars, # Y00408. With this system installed, you can then add a roof rack mount bike rack like the Raptor, # Y02085. I have included installation details for the raingutter towers and the bike...
view full answer... - How to Align Rain Gutter Towers on Roof of 2014 Jeep Wrangler UnlimitedYour roof capacity is going to be limited by what Jeep lists as the roof capacity in the owners manual. Aftermarket racks will have much higher capacities than what a Wrangler will have. For the rain gutters part # Y00101 Yakima recommends having them set vertical on the roof of your vehicle.
view full answer... - Do Yakima Artificial Rain Gutters have to be Positioned in a Certain Place on a Truck Camper ShellWhen mounting artificial rain gutters like # Y08002 to a camper shell, there is no specific distance apart they must be placed. What you will want to look at is where you can mount them (the strongest points on the camper shell would be ideal) and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. Just remember that if you place the bars too far back then items on the roof may hang over the back end too much....
view full answer... - Yakima Roof Rack Recommendation for a 2011 Jeep WranglerThe difference between the two mounting brackets is that the # Y08001 moves the attachment point for the Raingutter tower part # Y00101 out further to clear a roof that is tall or has steep or square sides. The # Y08002 is the regular one used for roofs that are shorter and have less steep sides. It really depends on the profile of your roof and how high/low you want to install the gutter tower. If you are installing the rack high on the roof you would want the # Y08002. If you feel...
view full answer... - Rain Gutter Roof Rack Availability for a 1959 Rover P4The Yakima Tower Kit we have for Rain Gutters is part # Y00101. This has never been tested on your 1959 Rover P4 but it is designed to fit rain gutters like what you have. You would need two crossbars part # Y8810023 as well. The height of the gutter feet is 7-1/4 inches. I looked at pictures of the roof of your vehicle and it has a pretty rounded roof. If you needed a taller setup you would also need the spacer to increase the height part # Y01101 which will ad 3-1/2 inches.
view full answer... - Weight Capacity of Yakima Raingutter Mounted Roof Rack on 2012 Jeep Wrangler UnlimitedPer Yakima, a roof rack installed on the Wrangler Unlimited with the # Y00101 Drip Rail Towers will be limited to carrying snow products like ski and snowboard carriers. This is due to the limited capacity of the drip rails and the maximum bar spread of 24 inches. Yakima mentions a maximum allowable weight load of 100 lbs, including the weight of the rack itself.
view full answer... - Roof Rack to Fit a 1984 Volkswagen Rabbit to Carry a BikeWe do have roof racks for your 1984 Volkswagen Rabbit but the Inno Feet # INLD are not a confirmed fit. All of the racks to fit the VW will extend past the feet. The system with the shortest bars is the Yakima using 48 inch Round Bars # Y00408 and Towers # Y00101. The Yakima FrontLoader # Y02103 fits great onto the crossbars. It holds the bike by the wheels so there's no need to remove the front wheel. It also includes a bike lock.
view full answer... - Hitch-Mount 2-Bike Rack for Use With StowAway Swinging Hitch-Mount Cargo Carrier on 2004 Ford VanYour StowAway Cargo bin with Swingaway frame is intended to be used only in its locked storage position (right up next to the vehicle) when it is loaded and you are on the road. It cannot be used without being locked in this position. According to my contact at Stowaway the swinging arm mechanism and your trailer hitch receiver could easily be damaged by such use. Given this there is no way you could fit a bike rack and two bikes between it and the rear of your Ford van. A safer option...
view full answer...
- Roof Rack for 2021 Jeep Wrangler Unlimited With Sky One-Touch TopI checked with our roof rack manufacturers, and there is one option for a roof rack that fits your 2021 Jeep Wrangler Unlimited with the Skye One-Touch retractable roof. This rack will work and still allow you to open the top so long as you use the recommended spacers. The entire rack for that will work is the following: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You...
view full answer... - Rain Gutter Roof Rack Availability for a 1959 Rover P4The Yakima Tower Kit we have for Rain Gutters is part # Y00101. This has never been tested on your 1959 Rover P4 but it is designed to fit rain gutters like what you have. You would need two crossbars part # Y8810023 as well. The height of the gutter feet is 7-1/4 inches. I looked at pictures of the roof of your vehicle and it has a pretty rounded roof. If you needed a taller setup you would also need the spacer to increase the height part # Y01101 which will ad 3-1/2 inches.
view full answer... - Roof Rack for 2022 Jeep Wrangler 4xe with Power Soft Top that Allows Top to OpenI checked with Yakima and came up with a roof rack that fits your 2022 Jeep Rubicon 4xE with the Sky One Touch power top and will allow the soft top to open. You'd need the Yakima 1A Raingutter Towers # Y00101 with two of the crossbars # Y8810023. And then the spacer kit part # Y01101 which is what gives the clearance for the power top to open.
view full answer... - Roof Rack That Is Compatible With My 2021 Jeep Wrangler Unlimited W/ Sky Roof And Rooftop TentI do have a solution for your 2021 Jeep Wrangler Unlimited with the Sky Roof. You can get a Yakima roof rack with the HiRise spacers. It will consist of the following items: Round 58" CrossBars for Yakima Roof Rack System (QTY 2), part # Y00409 Yakima 1A Raingutter Towers (QTY 4), part # Y00101 HiRise Spacers for Yakima 1A Raingutter Towers, part # Y01101 Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204 It has a dynamic weight limit of 165 lbs. That is the weight limit of...
view full answer... - Roof Rack for a 2022 Jeep Wrangler Unlimited with OneTouch SkytopI do have an option for you. I checked with our manufacturers and was able to find one roof rack that will work for your 2022 Jeep Wrangler Unlimited with OneTouch Skytop. This rack will fit and still allow you to open the top as long as you use the recommended spacers. All of the parts needed for this rack are listed below. - Yakima 1A Raingutter Towers # Y00101 - Round CrossBars for Yakima Roof Rack - 58" # Y00409 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You can lock...
view full answer... - What Roof Rack Fits My 2019 Jeep Wrangler Unlimited with Sky One Touch Roof?I have a great solution for you. Unfortunately, I confirmed with Rhino-Rack that the Rhino-Rack Roof Rack Legs - Gutter Mount - 8-1/4inch Tall # RL210S2 and the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 are not confirmed to fit your 2019 Jeep Wrangler 4-door Unlimited with a Sky One Touch roof. However, we currently do have a confirmed setup that will work from Yakima. For that system, I recommend the following parts for your vehicle: - Round CrossBars for Yakima Roof Rack - 58"...
view full answer... - Roof Rack for 2021 Jeep Wrangler Unlimited with Sky One-Touch Roof for Platform TrayThere really is only one roof rack option for the roof of your 2021 Jeep Wrangler Unlimited and it's the following round bar setup: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 Yakima does not have a version of the Jetstream that attaches to the raingutter towers. This rack would work with the Yakima LockNLoad Platform Rack for Crossbars # Y05048-39 you were wanting...
view full answer... - How to Carry Kayak at Front of 1992 Ford E-350 VanThanks for the photos, and although we do have a solution for you, the Curt Vertical Receiver Adapter # C45013 will only work with vertical OEM hitch receivers, which your 1992 Ford E-350 does not have. Additionally, any type of adapter is going to cut the capacity of your trailer hitch in half - including the tongue weight so adding any type of adapter with the type of cargo you are carrying is likely to push you past your capacity limits. The best option to carry your kayak is going...
view full answer...
- Replacement Parts for Yakima 1A Raingutter Roof Rack TowersIt sounds like you are talking about the shear block bases # Y8810007 for the Raingutter towers such as # Y8810137. This is a set of 4. Other replacement parts for the Yakima Raingutter 1A towers include: Boot set # Y8810008 Another shear block set # Y8810006 Hardware kit # Y8810136
view full answer... - What Roof Rack do You Recommend for My 2022 Jeep Wrangler Unlimited with a Sky One-Touch Roof?For your 2022 Jeep Wrangler Unlimited with a Sky One-Touch Power Top, we only have one option that is confirmed to fit your setup. For a great system, I recommend the following components: - Yakima 1A Raingutter Towers (QTY 4) # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 - Yakima Round 58" CrossBars for Yakima Roof Rack System # Y00409 - Same-Key Lock Cores # Y07204 With this system, you will still be able to open/close your roof. You also get the security of the...
view full answer... - Carrying Kayaks And Operating The Sunroof On A 2021 Jeep Wrangler UnlimitedThe Yakima 1A Raingutter Towers (QTY 4), part Y00101, is not tall enough to work with the one touch sunroof on your 2021 Jeep Wrangler Unlimited. In order to operate the sunroof you need the tallest, 11", rain gutter towers. If you add the HiRise Spacers for Yakima 1A Raingutter Towers, part # Y01101, your towers will have the necessary height. You can add the Round 58" CrossBars for Yakima Roof Rack System (QTY 2), part #Y00409. This rack will have round bars, so any of our kayak carriers...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.