To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.
Features:
Yakima BaseLine FX LG:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Aidan here with etrailer. Today, we're gonna be taking a look at the Yakima BaseClip Fit Kit for your Yakima BaseLine FX Roof Rack Kits. Now, this is gonna be the rubber pad and the clamps that actually hold the whole roof rack system in place and make it a custom fit for your various different vehicles. Now, that being said, there's tons of different kits out there on our website for different vehicles, all of those pads are gonna be molded somewhat differently to adapt to different roof shapes, so do plug in your vehicle information into our fit guide and find the right fit kit for you and your vehicle, but it's gonna be a look at the overall system, how it works, and how it functions with the roof rack. So the main two parts of this are gonna be the rubber pad and the clamp, but let's talk about that rubber pad first. It's gonna be custom molded to your vehicle, so you can see really well right here on this lip, it forms around that ridge on the roof and fits snugly into place there to make sure that nothing is moving around and it's fit custom to that area.
Now, the base of that fit kit is what actually clips into the tower here and serves as the connection point between the crossbar roof rack system and your vehicle. That rubber base to it is going to give you the maximum protection and make sure that you're not scratching or scuffing any paint on your roof, and it keeps things nice and sealed up. Now, the stainless steel clip is what also helps to secure it to our roof, that's gonna be the second main component. It's a stainless steel construction and a black powder coat finish, the finish helps it match the whole roof rack system, but it all helps it resists rust and corrosion. Now, the inside of those clips are gonna have a rubber padding, again, so there's no metal on metal contact with our paint or anything, and then you can see here, it's custom fit, hooking inside our door jam, and whenever I close the door, it'll just fit right around there, making sure that it's a nice custom fit.
It attaches up inside the tower right up through here, and it just tightens down, hooking into a slotted opening hole, and then that's what gets it all secured and what helps it join into the tower system. These fit kits come in pairs, one for the passenger's side and one for the driver's side. Now, the reason they do that is because depending on your vehicle, you're probably gonna have a different fit kit for the front and rear. Yakima does a lot of research and development into making sure it's a custom fit for the vehicle, and the one we have it on here today, the Honda Civic, is a perfect example. You can even visually see how much longer the clamp at the back is compared to this clamp up at the front.
So clearly, we're gonna need a different kit for the front end, because there's just less distance for that clamp to travel. So again, plug in your vehicle information to our fit guide, make sure you find the right kits for you, and make sure that you also have the right set for the front and rear. But that's really all there is to it. The BaseClip system is gonna work really well in tandem with that BaseLine roof rack system, and it's really just coming down to making sure you get the right fit for your vehicle, because without that fit kit, you don't have a roof rack. But that'll do it for our look at these BaseClip Fit Kits for your Yakima BaseLine Roof Rack Systems.
Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (18 Customer Reviews)
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.
One year later and everything works well. I had a problem early on where the rubber protection for one of the j clips from the base towers came off. Contacted etrailer and they sent me a whole new assembly direct from Yakima. Thanks for the prompt response and service!
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done!
After a year, the racks are holding up nicely and still have a solid fit. I only put them on the car when needed. It just takes a few minutes to set them up and go.
Worked well with install of rack system. Protected vehicle finish during install and no issues after install. Recommend this product.
Works well and fits well. Have used to carry a canoe on several trips totaling more than 4,000 miles.
Great quality and extremely durable. Still have them on my car a full year later.
Awesome! Thank you!
I purchased clips that were stated as being compatible with our 2010 Chevrolet Impala. The front clips fit well, however the rear clips do not.
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of eTrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
I purchased clips that were stated as being compatible with our 2010 Chevrolet Impala. The front clips fit well, however the rear clips do not.
I have a 10th gen Civic sedan and I was dying to get the perfect roof rack set for my car. At the time of my purchase there was not many visuals of what the rack system looked like on this car.
I purchased the:
•Yakima 50in Jetstream crossbars
•Yakima baseline towers
•bc182 & bc183 clips
•Yakima 46in fairing
Overall I love how it looks on my car! During This COVID pandemic I have been camping more, and this is the perfect foundation! First off, the 46in fairing is the perfect fit for the 10th gen civic! Wind noise is low also with the help of the aerodynamic crossbars. My main concern was the fuel efficiency. On long road trips I still average 38-40 mpg with the rack on. My daily commutes I average 34 mpg without Econ on.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Hyundai Sonata - glass pano roof. These items have been on for about 1-year. So happy with the set up. I’ve take a road bike and a mountain bike on 500+ mile trips. The mounts do an excellent job.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.