To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 50" Long - Silver - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Aidan here with etrailer. Today, we're gonna be taking a look at the Yakima BaseClip Fit Kit for your Yakima BaseLine FX Roof Rack Kits. Now, this is gonna be the rubber pad and the clamps that actually hold the whole roof rack system in place and make it a custom fit for your various different vehicles. Now, that being said, there's tons of different kits out there on our website for different vehicles, all of those pads are gonna be molded somewhat differently to adapt to different roof shapes, so do plug in your vehicle information into our fit guide and find the right fit kit for you and your vehicle, but it's gonna be a look at the overall system, how it works, and how it functions with the roof rack. So the main two parts of this are gonna be the rubber pad and the clamp, but let's talk about that rubber pad first. It's gonna be custom molded to your vehicle, so you can see really well right here on this lip, it forms around that ridge on the roof and fits snugly into place there to make sure that nothing is moving around and it's fit custom to that area.
Now, the base of that fit kit is what actually clips into the tower here and serves as the connection point between the crossbar roof rack system and your vehicle. That rubber base to it is going to give you the maximum protection and make sure that you're not scratching or scuffing any paint on your roof, and it keeps things nice and sealed up. Now, the stainless steel clip is what also helps to secure it to our roof, that's gonna be the second main component. It's a stainless steel construction and a black powder coat finish, the finish helps it match the whole roof rack system, but it all helps it resists rust and corrosion. Now, the inside of those clips are gonna have a rubber padding, again, so there's no metal on metal contact with our paint or anything, and then you can see here, it's custom fit, hooking inside our door jam, and whenever I close the door, it'll just fit right around there, making sure that it's a nice custom fit.
It attaches up inside the tower right up through here, and it just tightens down, hooking into a slotted opening hole, and then that's what gets it all secured and what helps it join into the tower system. These fit kits come in pairs, one for the passenger's side and one for the driver's side. Now, the reason they do that is because depending on your vehicle, you're probably gonna have a different fit kit for the front and rear. Yakima does a lot of research and development into making sure it's a custom fit for the vehicle, and the one we have it on here today, the Honda Civic, is a perfect example. You can even visually see how much longer the clamp at the back is compared to this clamp up at the front.
So clearly, we're gonna need a different kit for the front end, because there's just less distance for that clamp to travel. So again, plug in your vehicle information to our fit guide, make sure you find the right kits for you, and make sure that you also have the right set for the front and rear. But that's really all there is to it. The BaseClip system is gonna work really well in tandem with that BaseLine roof rack system, and it's really just coming down to making sure you get the right fit for your vehicle, because without that fit kit, you don't have a roof rack. But that'll do it for our look at these BaseClip Fit Kits for your Yakima BaseLine Roof Rack Systems.
Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (135 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Follow the instructions, and you can't go wrong on the self installation
Yakima Baseline with Yakima CBX 18 Cargo Box fitted on my 2012 Toyota Corolla S Sedan 2012.
Instructions were clear and roof rack was easily installed.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
You guys provide great products and excellent customer service.
Thanks
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;)
These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp.
Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise.
These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done.
They look good, too;)
etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away.
etrailer had a quick response to my email request for info regarding the replacement parts I needed. The suggested replacement part were exactly what I needed to fix the issue.
I’m using these towers in conjunction with the JetStream cross bars. Assembly and setup was easy, all the tools you need are provided, except perhaps a tape measure for mounting. Looks and feels solid and well made. This is my second set of Yakima towers and cross bars. I plan to use this setup for an old roof top hard shell case and for my mountain bike to get to the trail head.
After completing the installation I took it out for a spin to check for wind noise at highway speeds. No discernible noise, I’m very happy about that as I really don’t want to remove these when not needed. For reference these are mounted on a 2019 Subaru Forester Touring with factory raised rails. Plenty of clearance for attaching equipment and gear.
Side note: the gentleman that assisted me on the phone while ordering was very pleasant and helpful, got me the right products very quickly as I was in a time crunch. Two thumbs up!
Solid build quality and easy installation on my '21 Mazda CX-5.
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Well packaged and on time
Great product - very good quality. I liked the fact that I could keep the risers mounted on my car, but could remove the cross bars. It took me awhile to install - but I'm not very mechanically inclined.
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit)
One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes.
Used in rain at least once, (sustained 60mph), with no leaks.
Good condition quality. Good and detailed instructions but aittle tedious install.
Roof rack parts were ordered correctly and shipped quickly.
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The Yakima crossbars, along with the RidgeLine Towers and the the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend.
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.
Yakima Jetstream cross bars.. nice bars worth the extra money. can be adjusted for pitch/angle of attack to "tune" the air profile.. mine have absolutely no high speed wind noise or whistling.. rubber weather strip underneath further smoothes the bar profile.. quietest roof rack system I have ever owned..
I have a Buick Envision and it seemed as if it would be difficult to get the correct rack, but it turned out to be easy. I entered my vehicle info and was directed to the Yakima Skyline with flush rails. It was easy to install and they look great. I will be able to take my canoe out with no problem! Joe
Great product fast shipping
Great! Easy to install!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.