To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima CoreBars - 50" Long - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Adam: Hi everyone. Adam at etrailer.com. Today we're going to be taking a look at the Yakima roof rack system on our 2019 Toyota Highlander.So on this specific system, we have the skyline towers, which are going to be these guys right here, with that nice cap. And the landing pads are going to be the skyline landing pads as well. And that's going to allow you to use your flush-mounted rails of your Highlander to put these on. It's really, really simple.
Really all you've got to do is just undo that cap and it comes off. We actually do have a cap that comes and goes over these whenever you're not using them. Just to show you guys, I'll actually go and grab one real quick.That's the one thing I really do like about this roof rack system. There's not a whole lot to it, and whenever you're not using it .. Look at that.
It's like it's not even there. Super cool, super convenient. You can just take it off like that, put your bars on there like this, lock it down into place, and then you're ready to go. It's really a quick system, and what I would definitely recommend to somebody who's got a Highlander.So these specific crossbars that we have right now are called jet stream bars, and they're going to have a nice aerodynamic feel to it. Kind of looks like a airplane wing.
A little bit thicker in the front, a little bit skinnier in the back, helps that air just travel over it a little bit easier and smoother, so you won't have some of that road noise whenever you're going down the road, and also some of that drag you might have. This isn't going to really hinder your gas mileage all too much when it comes to cross bars.But these are going to be made of aluminum and they are the 50 inch crossbars as well. The powder coated finish is going to help it resist against rust and corrosion. And you will have about 165 pounds of carrying capacity on these bars, but always look on your Highlanders owner's manual to make sure that it will be able to handle that much weight.So these cross bars are pretty wide, but not that thick. So a lot of those accessories that are going to wrap around your bars, I think you'll be fine.
So we're going to do a quick measurement, about three and a quarter inches long and only about maybe an inch thick. But a lot of these crossbars are going to just accept your T track accessories. Right here, all you've really got to do is just take your cap off, just push down on this rubber and you'll be able to slide all your attachments on there.We have a bunch that you can do. I would probably recommend for this vehicle, just a roof mounted cargo basket, just to get a lot of that stuff out of the inside, up and on your roof so your passengers will have a lot more room, just to move around whenever you're going on longer trips.Of course a kayak carrier will be ideal, just because, how else are we going to carry a kayak on this Highlander Probably it has got to be on the roof. So we do have attachments for that as well. There's a bunch of them to choose from, so be sure to pick the one that's right for you. We're going to go ahead and measure just from the top of our roof to the bottom of our bars. Going to be about four inches from the top of our roof to the bottom of the bar, but then it's going to be about five and a quarter inches from the top of our roof to the top of our bar.Also, another thing to think about is just whether our sun roof is going to be able to open and go underneath these bars here. With all that amount of gap, we're going to be plenty fine. We don't have to worry about this not being able to open and us losing the functionality of our sunroof.So there's two different things I need to go over with you guys. One is that these are available in silver as well, so if you like that color a little bit more, maybe it'll go better with your crossbars, or whatever color that your vehicle may be. There is two different colors to choose from, so that's good to know.Also, we do have optional locking cores, so pretty much what locks this bar to our actual vehicle right here does not come with anything that's got to have a key or anything like that. And you can buy those separately. Put that in there real quick, just to give you that added comfort. Other than that, it's actually pretty easy to install. Everything's pretty much in the kit that you need. So let's just go ahead and show you guys how.Alrighty, so we have our front ones already installed, but we have all the equipment, hardware and tools that we need to get to back installed. So that's what we're going to go ahead and do right now. So the first thing we want to do is grab a trim tool. If you don't have one of these, you can use a flathead, if you want. You might make a little bit of a scratch, but there's a little plate here. Put it in the little slots like that and work our way to get this little bracket out. Put that to the side for later.Now what we want to do is we're going to take this portion of our kit. It is going to have an R on it. These are going to mean rear. The other ones on our front had an F on them. And what we're going to do, they're really going to just fit in one slot the best. The other way isn't really going to line up too good. So be true to just do that, get it nice and seated down into place.Then we can take our second portion. We are going to have to take these caps off. They just pop off like that, and we're going to line those up, and then we're going to take a bolt and a lock washer, go down in there, and it's going to thread into the factory hole that they have already provided. Just start threading them down. Try to get it as straight as possible, once you start really torquing them down. Give it a good shake, make sure it's nice and secure, and once you do, you're pretty much done with that. And just for now, I'm just going to put this little cap on here like that. And we can do that same installation process on the other side.All right. So all we really need to do is start getting our towers put up onto our bars. And to do that, first things first, we just need to take our tower here. We're going to have a little piece like this. It's going to have a little bit of teeth on the bottom end here and that's going to be facing a little teeth on the top end of our feet.Just get those teeth lined up, just like that. Snap it into place. Now, take your little T track here. It's going to go down in there. You've got to make sure you line up the bolt with the hole. Then we can flip it upside down. Do our best to tighten it down. Perfect. We can do that same exact thing for the other foot.So before mounting our tires onto our bars, we want to make sure we have them in the right orientation. The rounded portion right here is going to be facing the front of your vehicle, and of course, the more slim edge is going to be facing the back. With that in mind, we can take our towers here. We're going to flip it around like so, and I'm actually going to put this one on backwards and slide it all the way down to the other end. Just fit it within that track, slide that down and then put this one on directly, just like this.All right. So now we're going to do is just replace our cap and then we're going to throw it up on top of our vehicle. To get the right fit.Now the only really thing we need to figure out is just make sure that our cap is going to be open on the end. This is going to allow it to seat down into our little feet here . just like that on both sides.So now's a good time to get the spread from our bars, from our feet all the way to the edge here, nice and even on both sides. And once we do that, you can go ahead and take your tool and just tighten this up. Let it snap real quick, and then you can go ahead and just close this cap, just like that. I want to do the same that on the other side.So now that you have all those steps done, just go ahead and give it a good shake, make sure everything's staying into place, how it should, and if so then you're ready to either load up some of your accessories or just get down the road.Well, everyone that just about does it for our look at the Yakima roof rack system on our 2019 Toyota Highlander.
Average Customer Rating: 4.8 out of 5 stars (164 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
Very easy to replace. Fit perfectly. I had a slight disaster with roof rack and Yakima showdown but fortunately replacing the landing pads was all that was needed. Very happy about the ease of finding, installing and using.
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!
All I can say is wow!! Outstanding customer service from shipping overnight, to follow up the next day to make sure the package arrived safely and was the appropriate part!! Customer service all stars!!! Thank you so very much!!
You guys provide great products and excellent customer service.
Thanks
As described! Quick delivery!
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.
Great product great service
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water.
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done!
first try was missing what was needed
Etrailer helped. It was great!
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company!
Great company. Fast delivery.
Should include extra end caps just in case they fall off.
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.
Very sturdy, well made. The assembly instructions are not too good but if you call Yakima they will provide additional instructions.
Customer service was excellent, they called me to tell me one item was backordered and how long it would be. Package was shipped with enough packing material. Install was pretty easy, some of the Yakima measurements in the manual are a couple inches off but no big deal. This will be used to carry a box for when the family takes trips. Can pile all the luggage up top and have more room in the car. I would recommend the Yakima corebar roof rack and etrailer! Their price was lower than 2 other sites I checked.
I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.
Great product and Sales Support from etrailer.
I bought this for my Son as a Grad/BDay gift for a Honda HR-V which has slightly odd roof/door shape
He installed it himself said the install was straightforward but the instructions could use a little improvement.
etrailer Sales Support was great, I was a little concerned about getting the right parts and the return policy. Olivia was great to work with, she offered recommendations and matched the parts to the type and vehicle it was to be installed on along with a kayak mount.
All the parts arrived in mint condition with no missing pieces.
I'll for sure return to etrailer on future purchases.
Wonderful service from Kimberly at etrailer.com. I had ordered a roof rack in December for I car I had on order. Ultimately I purchased a different vehicle more than 3 months later and the roof rack and mounting parts were not compatible. I had no problem returning the unopened products and just needed to pay the postage. Kimberly made the process easy and seamless, making sure to send the new Yakama cross bars and necessary parts. It fits beautifully on my new car and setup was fairly simple with video support and step-by-step instructions.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.