To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Inno Aero Aluminum Load Bar - 42" Long - Black - Qty 1:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
All right. Today on this 2011 Kia Sorento, we're going to show you an Inno Aero Bar in sand-brushed black color, part number INXB108. With this part number, you get 1 Aero Bar, like you see here, so if you need 2, you need to order 2 of same part number. It's actually shaped a little bit like a wing. This is a leading edge right here. It goes towards the front of the vehicle.
This end would go towards the back of the vehicle. You can also see a rubber strip inside here. This will help work with your accessories. You can cut this out to install your rooftop accessories that go inside the track. It also helps keep the air from whistling over the bars to go drive down the road. Overall, it's going to be about 3 inches acrossed front to rear and the length of this bar is for vehicles that can use a 42-inch length.
Now, base rails aren't going to attach themselves. To attach them to the raised rails like we have on our Kia here, we're going to use part number INXS100. These are the Inno Stays for the Raised Rails, and with this part number, you get a quantity of 4. Let's go ahead and install on our crossbar. Now, I already have the other side installed, but it's very easy. First off, you notice back on our crossbar here, there's a plastic insert and moves very easy.
What you want to do is make sure this plastic insert is pushed all the way towards the center. There's a little tab you want to push down here first and then slide it all the way back, and we'll just go ahead and put it into place. We line it up. It kind of fits into its own track, which is cool, makes it feel secure. Basically, you pull it out towards the end til it snaps.
Okay, and yes, it is designed to have this amount of play so it fits a variety of different roof racks. Let's go ahead and put it into our car. Make sure the strap is easily accessible, that way we can route it underneath the factory roof rack on the other side. Let's just carefully place it over the top. Okay. Now, do the same thing with this side. Route our strap underneath the rail. Okay. I'll just go ahead and take our strap, put it into place, and just take up the slack for now because we still want to be able to move it back and forth. All right. Now, let's go ahead and do the same thing on the other side real fast. Now, once you have them both loosely installed, it's a good idea to go ahead and get a measurement from whatever rooftop accessory you're going to use with these guys and set the distance. Typically, when you set the distance, you want to go from center of one crossbar to center of the other. Once you're satisfied with the placement of rails, just simply go ahead and tighten them down finger tight. Then, make sure the handle points down. Let's go ahead and install our cover. Now, on our covers, there's a left and a right-hand side. If it simply doesn't go onto one side, then chances are you had it backwards. Now, these covers are locked into place, so you may have to unlock it to make sure it goes fully in place, and then lock it. Once you have it locked into place, you have a nice smooth finish on the end here, it matches the lines of the vehicle, and it's secured to the bar from inaudible 00:03:14. Okay. One side is done. Let's basically repeat the same process on the other side. In really just a few moments, we got our vehicle ready for your favorite rooftop accessory. That'll finish it for the Inno Aero Bar in 42 inch length in a sand-brushed black, part number INXSB108, and also our Inno Stays for Raised Rails, part number INXS100, on our 2011 Kia Sorento. .
Average Customer Rating: 4.8 out of 5 stars (5 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.Arrived damaged after waiting 40 days for this item that was listed as in stock but was not! Then told it was in that it finally got to them and it was shipping. Then no ship! Called and was told it was there but they can not find it. Stocked in the wrong area! Finally received it. The damage on the cross bar was packed damaged. No damage to the box! A little unhappy.
etrailer was great to work with on my order. I really didn't now what I needed, but I knew what I wanted it to do. They were very knowledgable and helpful. Will definitely recommend and use again.
Fast shipping, great customer service and easy to install
Inno makes the best products; high quality & easy to use
Great Roof Rack! Looks very nice on my Ford Focus! Installing a rod pod soon! Quick Delivery! Outstanding product!
Shipping was fast, items came in perfect shape
Inno makes the best products; high quality and easy to use.
Inno makes the best products
Nice
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.