Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y24TB
Our Price: $688.80
Confirmed to Fit
2010 Subaru Forester
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (235)
- Q & A (0)
- Videos (9)
- Photos
Yakima Roof Rack - Y24TB
- Aero Bars
- Crossbars
- 50 Inch Bar Space
- Yakima
- Black
- 2 Bars
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 50" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 11 Fit Kit:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with fixed factory install points
- Attach to factory fixed points with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000233 Landing Pad 11 for Yakima Control Towers
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Installation - 2022 Subaru Forester
What's up everybody It's AJ with etrailer.com. Today we're gonna be checking out the Yakima Roof Rack System. With this system, you're gonna get the JetStream crossbars and TimberLine Towers, and this is gonna allow you to attach it to your raised rail on your 2022 Subaru Forester. Let's check it out. Now, the reason you wanna get a roof rack system is you don't have enough room in your car for whatever else you wanna throw or take with you. So maybe you wanna throw a cargo carrier up here, load it up with gear, maybe some suitcases, or a ski and snowboard carrier.
It's much easier to have it up here on the roof than trying to fit it inside your vehicle. Another option would be a kayak carrier. If you wanna throw a kayak up here, these are gonna allow you to use the space on your roof to help you take more stuff. With the system, you're gonna get the JetStream crossbars here. These are gonna be arrow bars.
You see how they're thinner back here and wider up front. Helps with that wind resistance. Also, it's gonna be 50 inches long. So from here to that side there before the end cap, that's how much space you have to work with, where your accessories and loading up things on here. You got the TimberLine Towers here that wrap around the raised rails, and those attach really easily.
Just got one tool with all to put it on there and it's on there real sturdy. I can shake the whole car back and forth and you see there's no movement here in the bar or the base at all. You have some options with what you wanna throw up on the bars as well. So you can use the wraparound strap method on some of your ski carriers, or even your cargo carrier. You also have the T-Track system here, so you can push down on this rubber strip once you take off the end cap, and slide something in along there.
That way there's not gonna be any strap or anything hanging down here. You do have four inches of space from the roof to the bottom of the bar, so that should be plenty, even you have to have hand knobs, putting a roof box up here, or anything like that. You're gonna have the space to be able to do that. The bars themselves are made out of a lightweight aluminum, with a black powder coat finish on there, and also has a weight capacity of 165 pounds. So just keep that in mind if you're putting in a rooftop box or a cargo carry up here, don't overload it. Now, even with our roof rack system on the raised rails, we can still use our sunroof on the Forester. Just to show you. We bring all the way back, and show you that it doesn't get in the way or obstructed at all. The install's not that bad. You have to do a little bit of pre-assembly but they give you the one tool you need to do that. Didn't take me that long. Check it out, I did it. Now, let's assemble the base. So we have it laid out, I've already put one on the other side. It's really easy to do you just need your tool. We're gonna flip it around and insert our plastic adapter with key. So we're gonna flip it like this. You want the ridges to be against the ridges on the inside there. You see this bolt This is gonna tighten up into the centerpiece, so. And push the plastic piece in first. You hear a snap. And that's adapted it so you can put this into place. You'll wanna line up that bolt and start to tighten down just a little bit. You want a little play in there because this is gonna slide into the bottom of the rail. So you can pull back on this bolt that shows you the head of the bolt on the inside. Let's get a couple turns on that, get it started. Looks like it's attached, you see, not gonna fall out. Now we can slide it on our rails. So we come here to the end of the channel, just slide it in. Everybody got their rubber strips installed and cut the length that way. It's gonna cover up any wind noise and I know exactly where to put the foot. So with that in place, now we push this outta the way and tighten it down further. This what's nice about the tool is this gonna click when it'll let you know it's tight enough. There we go. We can put our weather strip here right by the tower. Just push it down into that channel, stays in place and we'll add our incap and also just slides right back on. Now we'll set the bars into place. We got the raised rails, so just be careful with the straps. You wanna just drop it on the roof but you can just carefully set it in the place. I'm gonna take the strap wrap around the bottom, set in the channel. I'm gonna show you on that side what I did. With it set in the place, let's get some measurements real quick and go from center to center to see what your crossbar spread's gonna be. That's gonna be depending on what accessories you want to use. The rule of thumb usually is not going under 24 inches of crossbar spread. We have ours at 31 today, so you'll measure both sides. That also helps you make sure they're even, and then, look at the overhang on the bars as well. We have about four inches of overhang. Again, measure that on each side while it's loose that way you can make sure everything's in the right spot. And I'll bring the band around and attach it here at the bottom of the tower. And since we've already got our measurements, we know it's in place. I'm gonna get a tool and we'll tighten it down. Come back with our tool. We'll go right here to this bottom bolt and start tightening that up. And as I turn you're gonna see the band tighten up against the raised rail. And the same idea with the clicks, it'll let you know when it's tightened down and properly. Now when we're done, we'll just slide on the covers. Overall, not too bad to install. They give you the one tool you need. Didn't take me that long to get them attached to the raised rails. That makes it nice. Just make sure you get those measurements to get even on both sides and that crossbar spread's really important depending on what accessories you're gonna throw up there, so. You're gonna put up a cargo carrier or maybe some ski carriers. Just make sure you've gotten the right spacing for those. Well, I think that does it. Thanks for hanging out and hope this helped.
Customer Reviews
Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2 - Y24TB
Average Customer Rating: 4.8 out of 5 stars (235 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
by: John11/16/2023
Mazda
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze.
by: Dan B.05/01/2016
At first, a little tricky to install, as the kit comes with hardware for a variety of applications (different length/size bolts, etc). But after a quick look at the directions and identifying which bolt to use for my car, install was a breeze. I love this Yakima setup because I can remove the bars/towers and leave the landing pads with a cap. Makes it great for taking the canoe out on weekend trips, but not taking the fuel-economy hit during the weekday commute to work.
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: David 04/26/2024
Parts arrived as advertised for the model
Car so happy to find the right fit
But super pricy for some plastic.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Vannack01/04/2020
I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car.
by: Stephen07/07/2020
2019 Hyundai Santa Fe
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.
by: Aidan08/19/2023
2012 Toyota Prius
Great bars and easy installation on my 2012 Prius C
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Oliver05/30/2021
BMW
Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
by: Kevin 11/14/2023
not installed yet but everything was delivered on time and in good condition
by: Dan 11/06/2023
Great company. Fast delivery.
by: Jeremy06/05/2018
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.
by: Alexander12/11/2017
Jeep Cherokee
Super solid rack and the only one that fits the Jeep Cherokee without rails well and looks good too. Easy to install and worth the price
by: Barry09/29/2022
the product was exceptional. I would recommend it to anyone, who has a vehicle with a naked roof. It is a solid as a factory installed rack. Josh went out of his way to get me a replacement torque screw driver because the first one from Yakima was working properly.
by: Angela04/08/2021
Very happy with our purchase. I love how easily you can remove the entire rack easily. Too bad the locking mechanism comes separately but we are still happy with what we received.
by: Steven 10/16/2023
Great product. Great service.
by: Porfirio10/26/2023
very informative and great work
25
654
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- 2019 Lexus GX 460 Roof Rack Recommendation to Fit Flush Rail Roof StyleI'll be happy to help you find the best roof rack solution for the flush rails on your 2019 Lexus GX 460. For your application I highly recommend the Yakima JetStream roof rack system because it is a high quality system that is built to be versatile and has adjustments in the legs so you know you get the absolute best fit out of the crossbars: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 30 - # Y25ZR Lock Core Kit - # Y07204 (optional) If you let me know what...
view full answer...
- Roof Rack Recommendation for Carry Thule Motion XT Box on a 2023 Lexus GX 460It does look like the OEM roof rack kit on your 2023 Lexus GX 460 is going to sit really close to your roof so I recommend replacing that with an aftermarket system to ensure you have enough clearance to your roof for the Thule Motion XT Rooftop Cargo Box # TH629706 to fit. I recommend using the Yakima JetStream system which includes the following parts: - 50" JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y96AR - Lock Core Kit # Y07204 (optional)
view full answer... - Roof Rack Replacement for OEM Crossbars to Carry Rooftop Tent on 2022 Subaru Outback WagonI'd be more than happy to help! To utilize a rooftop tent, like the Yakima SkyRise HD # Y07437, you'll actually need to remove your factory rack and replace it with an aftermarket kit. I really like the Yakima JetStream roof racks because they are not only great quality, but the legs have adjustments in them to ensure that you get the best fit possible. For this setup you'll need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 27 - # Y46VR Lock...
view full answer...
- Recommended Kayak Carrier for 2020 Mazda CX-5The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
- Parts Needed to Install Crossbars on the Yakima 72" HD Tracks for Roof RacksTo install crossbars on the Yakima 72" HD Tracks for Roof Racks # Y84MR you need 2 of the Landing Pad 26 # Y75ZR, the SkyLine Towers # Y53TR, and then your choice of Yakima crossbars. I recommend using the JetStream crossbars like the 50" # Y00425 because they look great, they are durable, and they are made of aluminum so they will last a long time. I like this system because you can adjust the crossbars along the rails to accommodate different accessories you might need on your truck.
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - 2022 Toyota Highlander Roof Rack Recommendation for Flush Rails on RoofThe roof rack that fits the flush rails on your 2022 Toyota Highlander is from Yakima and uses their Landing Pad 28: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 28 - # Y66VR Lock Core Kit - # Y07204 (optional) Attached is an installation video of this roof rack on a 2021 Highlander for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make some additional recommendations.
view full answer...
- How to Attach a Yakima Roof Rack to a 2019 Lexus GX460 w/ Flush Side Rails Thanks for the picture! The Landing Pad 30 for Yakima SkyLine And Control Towers item # Y25ZR attach directly to the factory flush rails. You won't have to remove you rails. You will also need the following parts to finish out your roof rack: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Flush Rails - Qty 4 item # Y53TR
view full answer...
- Kayak Carriers, Ski Racks, and Bike Racks for 2024 Jeep Grand Cherokee LaredoI'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier # RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for corrosion resistance, and comes with locks to keep your skis secure. Three kayaks will be a bit more challenging. Since space will be limited even with an aftermarket roof rack I recommend using the Malone FoldAway-5 # MAL38FR along with a J-style...
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-50 w/ Flush Rails That is helpful and we do have a Yakima roof rack that will attach to the flush rails on your 2023 Mazda CX-50. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend...
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer...
- 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush RailsI'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - How to Add Crossbars to a 2024 Honda CR-V w/ Flush Roof RailsYes, we do! To add a set of crossbars to the flush mounted rails on your 2024 Honda CR-V, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR
view full answer... - Wind Fairing To Reduce Noise on 2019 Honda PilotSorry to hear that, noise typically isn't a major issue with the JetStream bars # Y00425. A fairing will definitely help reduce any whistling as well as drag. Sticking with Yakima, we have the following available: -Yakima WindShield Fairing for Roof Racks - 34" Long # Y05016 -Yakima WindShield Fairing for Roof Racks - 40" Long # Y05017 -Yakima WindShield Fairing for Roof Racks - 46" Long # Y05018 -Yakima WindShield Fairing for Roof Racks - 52" Long # Y05019 You will need to measure...
view full answer... - Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xeThe Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 4 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
view full answer... - Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked RoofThanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
view full answer... - What Is The Difference Between T-Slot Mounting Hardware 8860085 And Y03098Yes, the Replacement T-Slot Mounting Hardware for Yakima FatCat and Whispbar Ski Carriers # 8860085 you mention will work with your Yakima Fat Cat 6 Locking Rooftop Ski and Snowboard Carrier # Y03088 (INACTIVE). The difference between # 8860085 and # Y03098 is the primary height at which they sit. The Yakima FatCat 6 will still operate normally, and will all you to channel mount your FatCat 6 into your aero style crossbars like the Yakima JetStream Crossbars # Y00425. For a low profile...
view full answer... - Why Are 2 Different BaseClips Needed for Yakima Roof Rack on 2018 Chevy CruzeThe difference between the BaseClip Fit Kit # Y06110 and BaseClip Fit Kit # Y06126 just has to do with the length and angle of the clamps that fit to the door jambs on your 2018 Chevy Cruze. Yakima does a fantastic job at fine-tuning their fitment which is why they have a wide variety of BaseClip options and those options can vary between the front and back positions on any given vehicle. Here are all of the parts you need to install a Yakima roof rack on your 2018 Cruze: 50" JetStream...
view full answer... - Recommended Roof Rack for a 2023 Kia Niro PHEV We have a set up that will allow you to add crossbars, however I checked with our vendors and did not see a hitch available for the 2023 Kia Niro PHEV and there's no indication that one is coming. Nobody made one for the 2022 either so it's not looking like there's going to be one. To add a set of crossbars to your Kia Niro, I recommend the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine...
view full answer... - Recommended Roof Rack for a 2024 Hyundai Tucson w/ Flush Mounted Roof Rails Congrats on the new SUV! Yes, there is a way to install a roof rack on your 2024 Hyundai Tucson with rails even though it has the panoramic sunroof. I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system...
view full answer... - Recommended Roof Rack for a 2024 Mazda CX-50 w/ Flush Rails To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
view full answer... - Correct Yakima Roof Rack Fitment for a 2021 Honda PassportTo install a Yakima roof rack on your 2021 Honda Passport you need at least 50" JetStream Crossbars # Y00425 and the TimberLine Towers # Y33TR or the Yakima TimberLine FX Roof Rack # Y78UV that has ore or a clamp style connection as opposed to the straps. If you don't have either of these setups then I can't recommend using an alternative setup even if you're able to get it to fit. A while back we had someone fit a roof rack to a vehicle and while it technically "fit" and stayed put,...
view full answer... - Does Yakima Roof Rack For 2013 Toyota Prius Require Professional InstallI would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed. I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for the...
view full answer... - Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 HighlanderIt truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
view full answer... - Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot RailsFor your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
view full answer... - 2019 Lexus GX 460 Roof Rack Recommendation to Fit Flush Rail Roof StyleI'll be happy to help you find the best roof rack solution for the flush rails on your 2019 Lexus GX 460. For your application I highly recommend the Yakima JetStream roof rack system because it is a high quality system that is built to be versatile and has adjustments in the legs so you know you get the absolute best fit out of the crossbars: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 30 - # Y25ZR Lock Core Kit - # Y07204 (optional) If you let me know what...
view full answer... - Replacement Yakima Towers Needed For Custom Install of Jetstream Cross Bars On A.R.E. TopperYou will need the SkyLine Towers for Yakima Crossbars, # Y53TR for a set of 4 or, # 8880614 for 1 each.
view full answer...
- Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above BedI have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
view full answer... - 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau CoverAs long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
view full answer...
- Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super DutyWe can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
view full answer... - Roof Rack Replacement for OEM Crossbars to Carry Rooftop Tent on 2022 Subaru Outback WagonI'd be more than happy to help! To utilize a rooftop tent, like the Yakima SkyRise HD # Y07437, you'll actually need to remove your factory rack and replace it with an aftermarket kit. I really like the Yakima JetStream roof racks because they are not only great quality, but the legs have adjustments in them to ensure that you get the best fit possible. For this setup you'll need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 27 - # Y46VR Lock...
view full answer... - Recommended Roof Rack for a 2023 Chevy Bolt EUV w/ Side Rails Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your...
view full answer...
- Parts Needed to Install Crossbars on the Yakima 72" HD Tracks for Roof RacksTo install crossbars on the Yakima 72" HD Tracks for Roof Racks # Y84MR you need 2 of the Landing Pad 26 # Y75ZR, the SkyLine Towers # Y53TR, and then your choice of Yakima crossbars. I recommend using the JetStream crossbars like the 50" # Y00425 because they look great, they are durable, and they are made of aluminum so they will last a long time. I like this system because you can adjust the crossbars along the rails to accommodate different accessories you might need on your truck.
view full answer... - Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
view full answer... - Roof Rack For 2016 Honda Pilot For Two Thule HullavatorsI am going to assume your 2016 Honda Pilot has flush side rails and that you can remove your factory roof rack, and if so there is a way to use a pair of the Thule Hullavator Pro # TH898, but the ShowDown is far too wide to put on next to the Hullavator. If you're okay using a pair of Hullavators, the roof rack you need for your '16 Pilot is the following, from Yakima: - Yakima JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 19 # Y00245 You can lock the roof rack...
view full answer... - Yakima HD Crossbar Rack For Retrax Pro XR Tonneau CoverYou'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - 2022 Toyota Highlander Roof Rack Recommendation for Flush Rails on RoofThe roof rack that fits the flush rails on your 2022 Toyota Highlander is from Yakima and uses their Landing Pad 28: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 28 - # Y66VR Lock Core Kit - # Y07204 (optional) Attached is an installation video of this roof rack on a 2021 Highlander for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make some additional recommendations.
view full answer... - Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
view full answer... - How to Attach a Yakima Roof Rack to a 2019 Lexus GX460 w/ Flush Side Rails Thanks for the picture! The Landing Pad 30 for Yakima SkyLine And Control Towers item # Y25ZR attach directly to the factory flush rails. You won't have to remove you rails. You will also need the following parts to finish out your roof rack: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Flush Rails - Qty 4 item # Y53TR
view full answer... - What Yakima Landing Pad Do I Need For My 2021 Subaru OutbackYour 2021 Subaru Outback Wagon needs Yakima Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4, part # Y46VR. This Landing Pad provides the mounting points for your Yakima Skyline or Control towers. If you are using the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4,part # Y53TR, you need to make sure you are using the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03536....
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer... - 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush RailsI'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - Roof Rack for Installing Two Thule Hullavator Kayak Carriers on Roof of 2020 Toyota RAV4By '4 Hullavators', I'm assuming you're meaning two sets which would allow you to carry two kayaks. Installing 2 Hullavators for carrying two kayaks will be a tight squeeze on the roof of a RAV4. You'll also need to keep in mind that each set of Hullavators weighs about 40 lbs, and most roof rack setups have a capacity of 165 lbs. This leaves you 80-85 lbs of capacity for the 2 kayaks in order to not overload the roof rack. If the combined weight of your Kayaks is less than 85 lbs, you...
view full answer... - Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xeThe Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 4 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
view full answer... - How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof RackYou will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Roof Rack For 2022 Lexus GX 460 For Thule HullavatorSure thing, we can get your 2022 Lexus GX 460 set up with a roof rack for your Thule Hullavator # TH898, and what you'll need is a rack from Yakima. The correct parts for your Lexus are the following: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 30 # Y25ZR I also recommend adding locks to protect your roof rack, keeping it secure on your Lexus. You can add those with the Yakima Same Key System (SKS) Lock...
view full answer... - 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier RecommendationFor a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
view full answer...
- Roof Rack Recommendation for a 2009 Ford Flex with Vista RoofYou will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
view full answer... - Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
view full answer... - Roof Rack for 2017 Subaru Impreza Sedan with Naked RoofYakima does have their Jetstream roof rack that fits your 2017 Subaru Impreza with a naked roof with the part numbers # Y00425, # Y53TR, and # Y00233 which is a super high quality roof rack that's easy to install and quiet but we also have other options like the Inno part # INXB123-130, # INXS350, and # INTR145. We have a few others two that you can check out at the link I attached to this page.
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Recommended Roof Rack for Bikes On a 2017 Subaru ImprezaIn order to carry bikes on the roof of a 2017 Subaru Impreza you'll need a roof rack, the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00248 for hatchback or part # Y00233 for sedan models is what I recommend. Then for a bike rack, the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 is a great option that wont require you to remove the wheel.
view full answer... - Yakima roof rack for Mazda 2Yes, I confirmed with Yakima that there is a roof rack available for your 2012 Mazda 2 that uses Yakima Round 48 inch Crossbars part # Y00408. To complete the roof rack you would need the following parts: LandingPad 11 part # Y00233 Yakima SkyLine Towers # Y53TR Yakima RoundBar SL Adapter # Y03536 I confirmed this with Yakima.
view full answer... - Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point RoofThe difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
view full answer... - Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
view full answer... - Parts Needed to Adapt Yakima Roof Rack for a Ford Taurus X to a 2012 Ford FlexTo install a roof rack system on your 2012 Ford Flex, you will need a set of SkyLine Towers, # Y53TR, a set of RoudBar Adapters, # Y03536, and the landing pads, # Y00233. Along with a set of Yakima CrossBars. Yakima recommends 58 inch CrossBars, # Y00409. If your previous Taurus X used 58 inch CrossBars, my research shows it most likely does, then you would not need to purchase new CrossBars.
view full answer... - Correct Yakima Landing Pad to Fit 2020 Subaru ImprezaThe Landing Pad 11 # Y00233 will fit your 2020 Subaru Impreza as long as it's a Sedan (4-door) with no existing rails or crossbars on the roof. Please note that you will need 2 sets of the Landing Pad 11 to complete your roof rack. I really like the JetStream crossbars so for a complete roof rack you will need the following: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 SkyLine Towers - # Y53TR Landing Pad 11 - # Y00233 Key System - # Y07204 (optional) If you happen to...
view full answer... - Yakima Roof Rack Parts for 2018 Subaru WRXYes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
view full answer... - Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side RailsFor your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
view full answer... - Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked RoofThere are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - Bike Carrying Recommendations for 2012 Mazda 3 HatchbackThe Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
view full answer... - Roof Rack Recommendation for 2011 Ford Flex to Carry Yakima ShowDown Assisted Kayak CarrierFor your 2011 Ford Flex with a naked roof Yakima does offer a roof rack solution that fits your vehicle that will allow you to use the Yakima Showdown part # Y04081 that you referenced. For that you'd need the part numbers # Y00422, # Y53TR, and # Y00233 and you'd be set. This is a custom fit rack that gives you aero shaped bars that will work great with the Showdown.
view full answer... - Recommendation for Carrying 4 Bikes on BMW 535iThe 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
view full answer... - Can a Pelican Trailblazer 100NXT Kayak Use a Malone J-Style Kayak Carrier on a 2012 Subaru ForesterFrom what I could find on your Pelican Trailblazer 100NXT kayak, you should have no problem transporting it on your 2012 Subaru Forester using a Malone J-Style Kayak carrier like the Malone FoldAway # MAL98FR. The Pelican Trailblazer 100NXT kayak has a pretty standard shaped hull and weighs 36 lbs., therefore the Malone FoldAway Kayak Carrier # MAL98FR will work to carry your kayak. The # MAL98FR has a weight capacity of 75 lbs. You will need crossbars on your Forester to use the Malone...
view full answer... - Availability of a Roof Cargo Basket For 2011 Ford Transit Connect With Fixed Factory Roof MountsI would recommend to use the Yakima Roof Rack System with a Yakima cargo basket. For the roof rack, you will need 3 parts: Landing Pad 11, # Y00233 SkyLine Towers, # Y53TR RoundBar SL Adapter, # Y03536 Round 48 Inch CrossBars for Yakima Roof Rack System, # Y00408 I am including a link to a video review on the Yakima roof rack system. With the Yakima roof rack installed on your vehicle you can then install the Yakima LoadWarrior Roof Rack Cargo Basket, part # Y07070-74. I am including...
view full answer... - Cargo Box Recommendation for a 2014 Subaru Forester with Fixed PointsFor a Yakima roof rack confirmed to fit the fixed points of your 2014 Subaru Forester you would need the SkyLine Towers and RoundBar SL Adapter parts # Y53TR and # Y03536, 2 sets of the LandingPad 11 # Y00233, and a set of 2 48 inch crossbars # Y00408. The Yakima MegaWarrior # Y07080 has been confirmed to fit this rack as well. I checked with Yakima and all of their cargo boxes we carry are confirmed to fit this rack. I attached a link to al of them to the right.
view full answer... - How To Choose Between A Roof Rack And Ladder Rack On A 2016 Ram ProMaster CityI do have an option that will allow you to carry both elongated items and rooftop mounted accessories on your 2016 Ram ProMaster City, however, the TracRac TracVan ES Van Ladder Rack part # TH29616XT has crossbars thats are much too big for most roof rack accessories. Therefore, I recommend using the Yakima CoreBar Crossbar System part # Y00421, part # Y00148, and part # Y00233 as this roof rack system has a weight capacity of 165 lbs. In addition to weight capacity, the aero crossbars...
view full answer... - Recommended Roof Rack for 2017 Subaru Impreza SportI do have a solution for you, however the Rola Sport APE Series Roof Rack referenced in your question is not a confirmed fit for your 2017 Impreza Sport with no existing rails or crossbars. For a similar aero style crossbar, I recommend the Yakima Roof Rack that consists of # Y00421 for the two 50 inch crossbars, # Y53TR for the SkyLine Towers and # Y00233 for the Landing Pads. This roof rack is confirmed to fit your vehicle and has a weight capacity of 165 pounds, although you will also...
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier RecommendationFor a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
view full answer... - Roof Rack Recommendation for a 2009 Ford Flex with Vista RoofYou will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
view full answer... - Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
view full answer... - Roof Rack for 2017 Subaru Impreza Sedan with Naked RoofYakima does have their Jetstream roof rack that fits your 2017 Subaru Impreza with a naked roof with the part numbers # Y00425, # Y53TR, and # Y00233 which is a super high quality roof rack that's easy to install and quiet but we also have other options like the Inno part # INXB123-130, # INXS350, and # INTR145. We have a few others two that you can check out at the link I attached to this page.
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Recommended Roof Rack for Bikes On a 2017 Subaru ImprezaIn order to carry bikes on the roof of a 2017 Subaru Impreza you'll need a roof rack, the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00248 for hatchback or part # Y00233 for sedan models is what I recommend. Then for a bike rack, the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 is a great option that wont require you to remove the wheel.
view full answer... - Yakima roof rack for Mazda 2Yes, I confirmed with Yakima that there is a roof rack available for your 2012 Mazda 2 that uses Yakima Round 48 inch Crossbars part # Y00408. To complete the roof rack you would need the following parts: LandingPad 11 part # Y00233 Yakima SkyLine Towers # Y53TR Yakima RoundBar SL Adapter # Y03536 I confirmed this with Yakima.
view full answer... - Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point RoofThe difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
view full answer... - Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
view full answer... - Parts Needed to Adapt Yakima Roof Rack for a Ford Taurus X to a 2012 Ford FlexTo install a roof rack system on your 2012 Ford Flex, you will need a set of SkyLine Towers, # Y53TR, a set of RoudBar Adapters, # Y03536, and the landing pads, # Y00233. Along with a set of Yakima CrossBars. Yakima recommends 58 inch CrossBars, # Y00409. If your previous Taurus X used 58 inch CrossBars, my research shows it most likely does, then you would not need to purchase new CrossBars.
view full answer... - Correct Yakima Landing Pad to Fit 2020 Subaru ImprezaThe Landing Pad 11 # Y00233 will fit your 2020 Subaru Impreza as long as it's a Sedan (4-door) with no existing rails or crossbars on the roof. Please note that you will need 2 sets of the Landing Pad 11 to complete your roof rack. I really like the JetStream crossbars so for a complete roof rack you will need the following: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 SkyLine Towers - # Y53TR Landing Pad 11 - # Y00233 Key System - # Y07204 (optional) If you happen to...
view full answer... - Yakima Roof Rack Parts for 2018 Subaru WRXYes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
view full answer... - Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side RailsFor your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
view full answer... - Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked RoofThere are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - Bike Carrying Recommendations for 2012 Mazda 3 HatchbackThe Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
view full answer... - Roof Rack Recommendation for 2011 Ford Flex to Carry Yakima ShowDown Assisted Kayak CarrierFor your 2011 Ford Flex with a naked roof Yakima does offer a roof rack solution that fits your vehicle that will allow you to use the Yakima Showdown part # Y04081 that you referenced. For that you'd need the part numbers # Y00422, # Y53TR, and # Y00233 and you'd be set. This is a custom fit rack that gives you aero shaped bars that will work great with the Showdown.
view full answer... - Recommendation for Carrying 4 Bikes on BMW 535iThe 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
view full answer... - Can a Pelican Trailblazer 100NXT Kayak Use a Malone J-Style Kayak Carrier on a 2012 Subaru ForesterFrom what I could find on your Pelican Trailblazer 100NXT kayak, you should have no problem transporting it on your 2012 Subaru Forester using a Malone J-Style Kayak carrier like the Malone FoldAway # MAL98FR. The Pelican Trailblazer 100NXT kayak has a pretty standard shaped hull and weighs 36 lbs., therefore the Malone FoldAway Kayak Carrier # MAL98FR will work to carry your kayak. The # MAL98FR has a weight capacity of 75 lbs. You will need crossbars on your Forester to use the Malone...
view full answer... - Availability of a Roof Cargo Basket For 2011 Ford Transit Connect With Fixed Factory Roof MountsI would recommend to use the Yakima Roof Rack System with a Yakima cargo basket. For the roof rack, you will need 3 parts: Landing Pad 11, # Y00233 SkyLine Towers, # Y53TR RoundBar SL Adapter, # Y03536 Round 48 Inch CrossBars for Yakima Roof Rack System, # Y00408 I am including a link to a video review on the Yakima roof rack system. With the Yakima roof rack installed on your vehicle you can then install the Yakima LoadWarrior Roof Rack Cargo Basket, part # Y07070-74. I am including...
view full answer... - Cargo Box Recommendation for a 2014 Subaru Forester with Fixed PointsFor a Yakima roof rack confirmed to fit the fixed points of your 2014 Subaru Forester you would need the SkyLine Towers and RoundBar SL Adapter parts # Y53TR and # Y03536, 2 sets of the LandingPad 11 # Y00233, and a set of 2 48 inch crossbars # Y00408. The Yakima MegaWarrior # Y07080 has been confirmed to fit this rack as well. I checked with Yakima and all of their cargo boxes we carry are confirmed to fit this rack. I attached a link to al of them to the right.
view full answer... - How To Choose Between A Roof Rack And Ladder Rack On A 2016 Ram ProMaster CityI do have an option that will allow you to carry both elongated items and rooftop mounted accessories on your 2016 Ram ProMaster City, however, the TracRac TracVan ES Van Ladder Rack part # TH29616XT has crossbars thats are much too big for most roof rack accessories. Therefore, I recommend using the Yakima CoreBar Crossbar System part # Y00421, part # Y00148, and part # Y00233 as this roof rack system has a weight capacity of 165 lbs. In addition to weight capacity, the aero crossbars...
view full answer... - Recommended Roof Rack for 2017 Subaru Impreza SportI do have a solution for you, however the Rola Sport APE Series Roof Rack referenced in your question is not a confirmed fit for your 2017 Impreza Sport with no existing rails or crossbars. For a similar aero style crossbar, I recommend the Yakima Roof Rack that consists of # Y00421 for the two 50 inch crossbars, # Y53TR for the SkyLine Towers and # Y00233 for the Landing Pads. This roof rack is confirmed to fit your vehicle and has a weight capacity of 165 pounds, although you will also...
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.