To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Inno Aero Aluminum Load Bars - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
How's it going neighbors This is Ed here with etrailer.com and we're taking a look at the Inno Aero Crossbar replacement 48 inch bar. The replacement bar is gonna be the same one that comes in the complete kit. If you somehow manage to damage or lose your Aero bar, this is gonna be the replacement. On this particular vehicle there's two separate sizes, so you wanna make note of the length of the bar that you have for your replacement, and you'll be able to still take advantage of the same features such as the T-track slot, the under slot, that's 10 inches, and your T-track is gonna be accessible by pressing this tab and removing your end cap. There's also a rubber channel guard in here that's gonna help while it's not being used reduce the wind noise. Essentially, it gives it a smoother path so you'll have less noise.
As far as the dimensions of this guy, it's a 3/8 inch opening, 7/16 tall, and it's 13/16 wide. So if you're needing any other replacement Inno parts, give us a call here at etrailer.com or you can check out our website. So this is Ed with etrailer.com and we're taking a look at the Inno replacement Aero Bar.
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
great bars, they have a slight curve to them so they look more natural, like they were made with the car, i went with 2 of the same size on my kicks, even though it was suggested to have one shorter, i think it looked much better in the long run.
These racks stay glued to your roof! Wouldn’t use any other system with older naked roofs
Quality looking. Very strong.
Good product. Fairly easy to install for a DIYer. I've pushed them to their weight limits and passed with flying colors.
Still holding up as well as the day it was installed (Mar'20). I've loaded this system down with a basket full of camping gear and another trip with 3 kayaks and single bike. Everything stayed solid and didn't budge at highway speeds and windy mountain roads.
Great product. Fit perfectly. Went together easily. High quality parts.
Sturdy and easy to install
A+
etrailer was great to order from! Going to the website makes it easy to see what roof rack will fit your vehicle. Ordering process was a breeze and the fulfillment updates were great. Ordered on the 13th and received it on the 16th so the FREE shipping was super fast. New installs of anything can always be challenging but once I read the the instructions it all went pretty smooth. Installing this Inno Roof Rack onto our 2021 Tacoma TRD Sport was pretty simple and took less than an hours from start to finish. Now we are ready to load up out Thule cargo carrier when we hit the road.
I am writing this review in the context of an owner of an old Yakima roof rack system from many vehicles before the 2021 Hyundai Tucson on which I just mounted four INNO separate sets of components to carry two bikes on top of the Tucson. Note that you need at least three sets of components to have a "base rack" system, including the hooks, in this case the INNO INK680, the INNO INSUT Feet and the INNO INB137 set of crossbars. The feet are rubber coated metal so that they will not mar the paint where they clamp to the edge of the roof just above the doors. The rubber pads are also substantial to provide a slip-proof and paint protecting bottom for the INSUT feet. Read through all the directions for all the components before beginning installation, perhaps even "rehearsing" all the steps before actual installation with tightening everything. The instructions could be clearer, but with practice walking through all the steps they make sense. Once installed, I could grab any part of the completed system and pull upwards, sideways, forwards, and backwards without any play or slack in any of the components. In fact, it was easy to rock the whole car side to side without budging the INNO components at all. Compared to the old Yakima system, the INNO is just as sturdy and substantial if not more so. Just to replace the Yakima "feet" to use my old round Yakima crossbars would have cost more than the total of the three INNO components needed to get the base system. Even better, the INNO system came with included locks to lock the system to the vehicle. Many years ago, the Yakima four lock cylinders were $[XX] extra - probably much more now. So, I think the INNO is at least as sturdy and capable for much less money.
Feels premium and was pretty straight forward to install. I think it looks really good on the 2019 Honda Accord Sport. I plan to pair it with the Inno Wedge 660 cargo box. So far, it seems really well made and has a rubberized texture throughout. I installed it by myself in about 30 minutes without the instructions. It also shipped in only 2 days.
I use this rack in conjunction with some long square cross bars from Thule that I have had for a few years. They allow me to carry two lightweight Hornbecks atop a 2019 cx5 that has no rails. At this point, I have only used a couple of times and the configuration appeared to work fine, but the problem is fitting them properly, having to measure precisely. It is probably just me, but I don’t have 100% confidence that the rack and canoes will remain on the roof with the little purchase the rack provides. Wish there was a way to improve the purchase that the lamps achieve.
These Inno racks are very high quality, and the installation is straightforward. They look good, too.
I've been a happy etrailer customer for years. Sales staff helped me pick out the right roof rack setup for my new 2023 Escape that worked with my low-profile rails. 3 separate boxes of pieces but they all came together perfectly. Very happy with my purchase and etrailer customer support! Rack is solid, low wind noise and will work with the accessories I need, kayak carrier and cargo basket.
Got these with the custom fit kit (INK860) and the through feet/stays (INXS250) for my 2014 Ford Fusion Hybrid. Assembly's not difficult, though you do have to work with three different instructions: 1 for the stays/feet (the main install instructions), one for the Crossbars (minimal to do there), and one for the custom fit kit (again, minimal, though this one is crucial as it contains the measurements for the setup).
Things went pretty smoothly. However, when I put it on my roof at the measured distances from the center line, the feet didn't both occupy the rain gutter as they are supposed to. I checked the measurements, and both the front stays were at 21.5" and both back stays were at 21 3/8 " . Since those were the called for measurements, I'm not sure why I didn't fit perfectly. However, they're great and I can't wait to put them to use with my kayak and snowboard and bike. Thanks E-Trailer.
Photos show how great the system looks as well as some of the gaps at the rain gutters. I don't think it's crucial to readjust those. I did try several times but couldn't seem to get them just right.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.