Custom Fit Roof Rack Kit With Y00233 | Y00429 | Y53TR
Item # Y54WB
Our Price: $688.80
Confirmed to Fit
2014 Ford Flex
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (75)
- Q & A (0)
- Videos (63)
- Photos
Yakima Roof Rack - Y54WB
- Crossbars
- Aero Bars
- 2 Bars
- 60 Inch Bar Space
- Yakima
- Silver
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 60" JetStream MD - Silver:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit (sold separately) to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers (sold separately)
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Clear anodized alloy finish is corrosion resistant
Yakima Landing Pad 11 (Set of 2):
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with fixed factory install points
- Attach to factory fixed points with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads (sold separately) to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter (Y03536 - sold separately)
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000233 Landing Pad 11 for Yakima Control Towers
8000429 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Silver
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00233 | Y00429 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Custom Fit Roof Rack Kit With Y00233 | Y00429 | Y53TR - Y54WB
Average Customer Rating: 4.9 out of 5 stars (75 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Hurtlocker08/12/2023
Strong, Solid Bars, Super Light, and really easy to install!
by: David 04/26/2024
Parts arrived as advertised for the model
Car so happy to find the right fit
But super pricy for some plastic.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Dan B.05/01/2016
At first, a little tricky to install, as the kit comes with hardware for a variety of applications (different length/size bolts, etc). But after a quick look at the directions and identifying which bolt to use for my car, install was a breeze. I love this Yakima setup because I can remove the bars/towers and leave the landing pads with a cap. Makes it great for taking the canoe out on weekend trips, but not taking the fuel-economy hit during the weekday commute to work.
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Luke07/20/2012
I got my new landing pads the day they said it would arrive. The pads were in their original yakima packaging, properly packed and overboxed. I work for a logistics company so I know the importance of getting product to a customer on time and exceeding their expectations. Very well done etrailer.com! The landing pads is just part of what I needed, and with the discount code included for my next purchase, I will be back. Thanks again.
by: Richard 04/06/2023
Happy with the purchase. Crossbars shipped and received quickly.
by: Robert P.12/23/2010
Yakima Roof Rack for BMWI ordered a yakima roof rack for my BMW during the mad rush of Christmas shopping and have received everything need for the assembly in a very short amount of time. I have even received follow up emails telling me the status of the shipping as well as a courtesy email. I also found that etrailer.com is also much cheaper than other retail stores such as REI. I highly recommend using etrailer.com!
by: Roy05/02/2016
Fit my nissan nv200 no problem. Comes with different size and length bolts to fit multible vehicles. Directions did tell me to use different size bolts thay clearly were the wrong ones but it was easy to figure it out. Also: u need all 3 products to complete ur roof rack system.
by: James H.12/13/2010
A rack for Porsches for lessFor those Porsche owners put off by the price of the Porsche Roof Transport System, try Yakima. For significantly less, you get a solid rack which uses your Porsche mounting points and since it is a component system, it fits both Caymans and Carreras.
by: Don Oakley11/12/2013
My roof rack arrived as promised and in good condition. Your web site was very useful in instructing the installation and how the parts matched with my other accessories. I did have a struggle lining up the screw holes, but with patience I succeeded.
by: Kyle 10/13/2011
Just installed to my 08' Subaru Impreza using the factory bolting mounts. Easy setup did in about an hour or so including my Yakima High Roller bike rack. Seems sturdy, hopefully so to carry my heavy downhill mountain bike!
by: Jeremy06/05/2018
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: tom s03/25/2011
looks good on car. easy install. easy on - off. looks strong. BUT incredibly noisy. I will have to buy the wind gaurd. They might as well include it because its no good without. now i will have to pay for shipping for the gaurd. I will remove it when not in use. Next life I'll try "the other guy"
by: Sara03/19/2019
Yakima is always great, the bars are just right for my kayaks and look great too.
by: Jake01/17/2019
No complaints! Fits seamlessly with the towers and super easy to remove and replace the bars!
by: Dave P.08/17/2016
Landing pads arrived in the promised time frame. Box was in good condition and product worked great
by: Tony C05/01/2012
Product was shipped very quickly with great communication along the way! This is a much more affordable option for the Porsche Cayman than the expensive factory bike rack.
by: Angelique06/16/2020
I needed a replacement for this part. Works great. Fast delivery.
by: Kevin M.08/29/2020
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.
25
645
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - How to Determine Correct Roof Rack For 2024 Kia TellurideI'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
view full answer...
- Roof Rack for Thule Canyon XT Roof Cargo Basket on 2020 Subaru AscentYour 2020 Subaru Ascent will require a roof rack to carry any cargo basket, including the Thule Canyon XT Roof Cargo Basket # TH859XT. Assuming you have raised side rails that run front to back on your Ascent, here is the roof rack that will work with your Subaru: - Yakima JetStream Crossbars # Y00429 (Silver) or # Y00426 (Black) - TimberLine Towers for Yakima Crossbars # Y33TR As for the paddleboards, there isn't anything designed to carry them in a cargo basket so you can use whatever...
view full answer... - Recommended Roof Rack for a 2024 Nissan Pathfinder w/ Raised Rails I would be happy to! To add a Yakima roof rack to your 2024 Nissan Pathfinder you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of Yakima's products is you can...
view full answer... - Rooftop Cargo Carrier Recommendation for 2020 Toyota Highlander with Panoramic RoofFor a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle. I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16"...
view full answer... - Yakima Crossbar Length For 2022 Lexus GX 460 & HullavatorI checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
view full answer... - What Roof Rack Do You Recommend for a 2007 Honda Element SC?Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
view full answer... - Whats The Longest Roof Rack Available For 2023 Toyota Highlander For Thule HullavatorThe longest crossbar that'll work with the flush roof rails on your new 2023 Toyota Highlander Hybrid Platinum is 50" and is the Yakima roof rack system which uses the following parts: Crossbars # Y00429 Towers # Y53TR Landing Pad # Y66VR This will be long enough to use both but as each one weighs over 40lbs, plus the roof rack weighs about 15lbs you'd be overloading your roof with two kayaks and two hullavators as your roof only has a 165lb capacity per Toyota.
view full answer... - Roof Rack For A 2017 VW Golf Sportwagen To Use With The Thule HullavatorWe can definitely set you up with a roof rack for your 2017 Volkswagen Golf Sportwagen that is compatible with the Thule Hullavator # TH898. The Hullavator requires the crossbar to overhang past the tower by 4" to 8", so it will be best to use a solid aero bar setup with a slightly longer crossbar. For that I recommend the Yakima Jetstream roof rack. This will consist of the following parts: Yakima TimberLine Towers for Yakima Crossbars # Y33TR Yakima JetStream Crossbars - Aluminum - Silver...
view full answer... - Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
view full answer... - Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Yakima Jetstream Roof Rack that Fits 2024 Ford Escape with Naked RoofYes, we do have a Yakima Jetstream roof rack that fits your 2024 Ford Escape with the part numbers # Y00429, # Y28TR, # Y06137, # Y06152. We recently installed all of the roof racks we offer and everyone agreed the Jetstream was the nicest and easiest to install.
view full answer... - Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDXYes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer...
- Roof Cross Bars That Fit A 2015 Chevrolet Silverado 1500 With An A.R.E MX Bed CapTo install a roof rack on your A.R.E MX Bed Cap on your 2015 Chevrolet Silverado 1500, you're going to need to install a set of tracks like: -Yakima Tracks for Roof Racks # Y01126 for 42" long tracks, -Yakima Tracks for Roof Racks # Y01127 for 54" long tracks, or, -Yakima Tracks for Roof Racks # Y01135 for 60" long tracks. From here you'll need an actual set of crossbars like the: -Yakima JetStream Crossbars # Y00429, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the Landing...
view full answer... - Yakima Roof Rack for 2018 Honda Odyssey that Can Fit Thule Hullaport XTThe Yakima HD bar is too thick for the Thule Hullaport XT part # TH849000 to attach to so for your 2018 Honda Odyssey you'd be better off with the JetStream roof rack part numbers # Y00429 and # Y33TR.
view full answer... - Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer... - Roof Rack For 2015 Toyota Highlander For Naked RoofThe video you referenced is for a 2015 Toyota Highlander with flush mounted rails; I checked directly with Thule and they do not have a roof rack fit for a naked roof on a '15 Highlander, just one with those flush mounted rails. So if you want a rack, you'd need a new set up. For that I would go with Yakima, as it is the that is the most similar in quality to a Thule rack. The parts that make up a Yakima roof rack for your 2015 Toyota Highlander are the following: - Yakima JetStream...
view full answer... - Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory RailsWe can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.
view full answer... - Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Roof Rack Recommendation for 2021 Toyota Highlander with Naked RoofHey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
view full answer... - Best Roof Rack For 2024 Kia EV9 With Raised Side RailsThe best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise. It is also highly durable,...
view full answer... - Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers? The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
view full answer... - Recommended Roof Rack System For 2021 Kia Telluride LX with Naked RoofThe only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline TowersTo use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Roof Rack Recommendation for 2020 Honda PilotThe rack you need will depend on how the roof of your 2020 Pilot is fitted out. I really like the Yakima JetStream roof rack, because of how well they're built and designed. They may not be the least expensive option, but they work very well and are extremely durable which makes them the most popular choice for your vehicle. If you have a bare roof, you'll need the following parts: • Yakima 60 inch JetStream crossbars, part # Y00426 • Yakima BaseLine roof rack towers, part # Y28TR •...
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - How to Determine if Two Malone SeaWing Kayak Carriers Fit 2019 Subaru Outback Factory Roof RackYour kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Best Roof Rack for 2020 Kia Soul with Fixed Mounting PointsThe best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
view full answer... - Yakima Roof Rack for 2022 Subaru LegacyYou are on point with Yakima being a really high-quality product so I completely understand wanting to stick with them for a roof rack on your 2022 Subaru Legacy. The Yakima roof rack that fits your Legacy consists of the following parts: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 I have added links to video reviews for you to check out as well.
view full answer... - Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
view full answer... - Yakima Roof Rack Parts Needed for a 2017 Subaru Outback WagonYes, the recommended Yakima Landing pad for the 2017 Subaru Outback is the Landing Pad 15 part # Y00241 that you referenced. For crossbars you would want the part # Y00408, for towers part # Y53TR and adapters part # Y03536. All of these components would complete a roof rack for your vehicle.
view full answer... - 2010 Outback Roof Rack OptionsAdding feet to your 2010 Subaru Outback Wagon will not change the weight limit of the rack. The maximum weight limit will still be 165lbs. Adding the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 51" Long - Qty 2, part # RRRTS551, does not change that. In fact, adding an extra feet/legs and crossbars to your roof rack will actually lower the weight you can carry on your roof. That is because your roof rack's weight actually counts toward the 165lb weight total. I would use my existing...
view full answer... - Roof Rack that Can Fit 2023 Jeep Wrangler Rubicon with Sky One Touch RoofThe Yakima Jetstream roof rack part numbers # Y00428, # Y53TR, # Y00226 is a fit for your 2023 Jeep Wrangler Rubicon that has the sky one touch roof and would do a great job to carry a tent and other cargo.
view full answer... - Roof Rack & Attachments For 2010 Toyota Tacoma TRD SR5I would get the Yakima HD Bar Roof Rack System. You'll need the HD bars # Y01156 Skyline Towers # Y53TR HD bar adapter # Y03541 and landing pad # Y74FR. You can then use the JayLow Kayak Carrier # Y04073, Off-Grid Cargo Basket # Y07139 or Skybox Cargo Box # Y95AV. These are just my suggestions for accessories but there is much much more on our website if you're wanting something different!
view full answer... - Will the Rhino-Rack # Y01-130B Fit My 2022 Hyundai Santa Cruz?Yes, you will be able to put 2 bikes on the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount # Y01-130B if the combined weight of the racks and bikes is exactly 220 pounds (or under). As far as the fitment of the # Y01-130B on your 2022 Hyundai Santa Cruz, that is a bit more complicated. The tracks will fit with the included hardware with drilling. With the 63" tracks, you can cut the tracks to the size of the bed rails. The complicated part is the crossbar fitment....
view full answer... - Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Parts To Use Existing Yakima Aero bars With RetraxONE For Toyota TacomaIt is possible to use your Yakima Aero bars on the RetraxONE part # RTT-60851 for the 2017 Toyota Tacoma. You need 2 sets of landing pads part # Y00221 to slide into the tracks of the Retrax system. You need one set (quantity of 4) of Yakima Skyline Towers part # Y53TR to attach to the landing pads. Then the Aero bars mount to the towers.
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Recommended Roof Rack for 2024 Toyota RAV4For an extremely quiet roof rack that fits your 2024 Toyota RAV4 with flush mounted rails I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR -Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and...
view full answer... - Recommend Roof Rack for a Bike and Kayak on a 2018 Honda CR-VIn order to add a roof rack to your 2018 Honda CR-V I recommend using the Yakima Roof Rack made of parts # Y01156, # Y53TR, # Y03541 and # Y00245. This system has heavy duty yet lightweight aluminum cross bars that are durable and rustproof. This option will also be far more cost effective than an OEM roof rack as I am sure you will come to find out. If you need a kayak carrier then I recommend the Rhino-Rack Nautic Roof Kayak Carrier part # RR570. It is side-loading and it comes with...
view full answer... - Length of Yakima Crossbars Needed to Load 2 Thule Hullavators # TH898 on a 2019 Honda PilotWhile we do technically have an option for mounting 2 Hullavators # TH898 onto your 2019 Honda Pilot with the Yakima SkyLine Towers # Y53TR and Landing Pad 19 # Y00245 on your flush rails, you would need at least 72" inches of usable crossbar space for the required 4-8 inches of length past the feet. This is because one Hullavator measures 36" long. The 70" JetStream crossbars # Y00427 does not provide enough length. With that being said, the only Yakima option we carry that has that length...
view full answer... - Can Thule Hullavator Install on Yakima CrossbarsThe Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer... - Is There A Trailer Hitch For 2023 Kia Soul GT Line With Center ExhaustIf you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (August 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece...
view full answer... - Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda PilotThank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - Can a Pelican Trailblazer 100NXT Kayak Use a Malone J-Style Kayak Carrier on a 2012 Subaru ForesterFrom what I could find on your Pelican Trailblazer 100NXT kayak, you should have no problem transporting it on your 2012 Subaru Forester using a Malone J-Style Kayak carrier like the Malone FoldAway # MAL98FR. The Pelican Trailblazer 100NXT kayak has a pretty standard shaped hull and weighs 36 lbs., therefore the Malone FoldAway Kayak Carrier # MAL98FR will work to carry your kayak. The # MAL98FR has a weight capacity of 75 lbs. You will need crossbars on your Forester to use the Malone...
view full answer... - Recommended Upgraded Crossbar System for a 2017 Mitsubishi Outlander With a Bare RoofI spoke with Thule and they were able to confirm that there actually are not any corresponding fit kits for the Traverse Feet and your 2017 Mistubishi Outlander with a slick roof. With that being said, your only option is to upgrade your roof rack to a newer system like the Yakima CoreBar Crossbars # Y00421, with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 11 for Yakima SkyLine and Control Towers # Y00233. This system will work with your bare roof, has a maximum...
view full answer... - Availability of a Roof Cargo Basket For 2011 Ford Transit Connect With Fixed Factory Roof MountsI would recommend to use the Yakima Roof Rack System with a Yakima cargo basket. For the roof rack, you will need 3 parts: Landing Pad 11, # Y00233 SkyLine Towers, # Y53TR RoundBar SL Adapter, # Y03536 Round 48 Inch CrossBars for Yakima Roof Rack System, # Y00408 I am including a link to a video review on the Yakima roof rack system. With the Yakima roof rack installed on your vehicle you can then install the Yakima LoadWarrior Roof Rack Cargo Basket, part # Y07070-74. I am including...
view full answer... - Roof Rack Options for Adding a Yakima SkyRise Tent on a 2011 Subaru ForesterTo determine if the factory crossbars on your 2011 Subaru Forester are compatible with a rooftop tent you will first need to see if there are any specifications for the tent. For example, the Yakima SkyRise, part # Y07436 for 2 people, requires that your roof rack be supported and no higher than 98" off of the ground. Both the roof of your vehicle and the roof rack need to have a minimum load capacity of 165 lbs as well. I have attached a photo that you can use as a guideline for your...
view full answer...
- Recommended Roof Rack with Bike and Kayak Carriers on a 2017 Mazda 3 with Fixed Mountig PointsWe do have black roof racks that install into the fixed mounting points on your 2017 Mazda 3 that don't use the clamps around the door frames. Although, you're correct that all of them stick out passed the feet so they aren't the OEM look you're trying to get. The rack I recommend is a Yakima system with their 50 inch JetStream bars which uses: 50 inch JetStream Crossbars # Y00425 SkyLine Towers # Y53TR Landing Pad 11 # Y00233 I've linked a video of the SkyLine towers being installed...
view full answer... - Recommendation for Carrying 2 Kayaks on a 2017 Subaru ImprezaWe do have a hitch that will fit your 2017 Subaru Impreza, which is the Draw-Tite # DT24959. If you choose to tow a Kayak trailer, this hitch will work well. However, when I looked up the owner's manual for your Impreza it said that your vehicle was not made or intended for towing trailers. I have another solution that will not void your vehicle's warranty. Yakima has a roof rack system that will allow you to carry both Kayaks, as long as you do not go over your Subaru's roof weight capacity....
view full answer... - Recommended Roof Rack and Ski/Snowboard Carrier for 2015 Mazda CX-5 with Naked RoofI highly recommend using the Yakima JetStream roof rack for your 2015 Mazda CX-5 because it has a 165 lb weight capacity, mounts directly to fixed points on your roof, and allows you to use a variety of other roof mount accessories. This consists of the SkyLine Towers # Y53TR, Landing Pad 11 # Y00233, and then your choice of JetStream Bars: 50" Black # Y00425 60" Black # Y00426 70" Black # Y00427 You can then use the Yakima FreshTrack # Y03093 and the Lock Core Set # Y07206 to make...
view full answer... - Roof Rack and Kayak Carrier Recommendations for 2003 Mazda Protégé 5You'll need to begin by adding a roof rack to your Mazda, which consists of the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 11 for Yakima Control Towers - Qty 4 # Y00233 Once the rack's in place, the # Y04074 SweetRoll Kayak carrier would be an excellent choice for you. Tie straps for the kayak to the crossbars and for the bow/stern are included.
view full answer... - Yakima Roof Rack Components Needed For A 2015 Kia SoulIdk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
view full answer...
- Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - Yakima roof rack for Mazda 2Yes, I confirmed with Yakima that there is a roof rack available for your 2012 Mazda 2 that uses Yakima Round 48 inch Crossbars part # Y00408. To complete the roof rack you would need the following parts: LandingPad 11 part # Y00233 Yakima SkyLine Towers # Y53TR Yakima RoundBar SL Adapter # Y03536 I confirmed this with Yakima.
view full answer... - Yakima Roof Rack Parts for 2018 Subaru WRXYes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
view full answer... - Cargo Box Recommendation for a 2014 Subaru Forester with Fixed PointsFor a Yakima roof rack confirmed to fit the fixed points of your 2014 Subaru Forester you would need the SkyLine Towers and RoundBar SL Adapter parts # Y53TR and # Y03536, 2 sets of the LandingPad 11 # Y00233, and a set of 2 48 inch crossbars # Y00408. The Yakima MegaWarrior # Y07080 has been confirmed to fit this rack as well. I checked with Yakima and all of their cargo boxes we carry are confirmed to fit this rack. I attached a link to al of them to the right.
view full answer... - Roof Rack Recommendation for 2016 Subaru WRX STiWe do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
view full answer... - Longest Roof Rack Bars That Fit a 2015 Subaru Impreza HatchbackSince you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
view full answer... - Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side RailsFor your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
view full answer... - Roof Rack for 2017 Subaru Impreza Sedan with Naked RoofYakima does have their Jetstream roof rack that fits your 2017 Subaru Impreza with a naked roof with the part numbers # Y00425, # Y53TR, and # Y00233 which is a super high quality roof rack that's easy to install and quiet but we also have other options like the Inno part # INXB123-130, # INXS350, and # INTR145. We have a few others two that you can check out at the link I attached to this page.
view full answer... - What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof RackFor your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
view full answer... - 2008 Mercedez C300 Sedan Yakima Round Bar Roof Rack RecommendationFor your 2008 Mercedes C300 the Yakima Skyline roof rack components you need are # Y00408, # Y53TR, # Y03536, and # Y00233 which includes the Landing Pad 11.
view full answer... - Recommended Roof Rack for 2017 Subaru Impreza SportI do have a solution for you, however the Rola Sport APE Series Roof Rack referenced in your question is not a confirmed fit for your 2017 Impreza Sport with no existing rails or crossbars. For a similar aero style crossbar, I recommend the Yakima Roof Rack that consists of # Y00421 for the two 50 inch crossbars, # Y53TR for the SkyLine Towers and # Y00233 for the Landing Pads. This roof rack is confirmed to fit your vehicle and has a weight capacity of 165 pounds, although you will also...
view full answer... - Roof Rack Similar to Whispbar Recommendation for 2014 Tesla Model S with SunroofI have a solution that will work well for you but Whispbar was actually bought out by Yakima. So to get the most similar roof rack to a Whispbar for your 2014 Tesla Model S with a sunroof, you'd want the Yakima JetStream roof rack part numbers # Y00426, # Y53TR, and # Y00233. With this you'd have a very high quality roof rack like you are wanting, that has aero shaped bars which will allow you to have minimal wind noise.
view full answer... - Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - Can a Pelican Trailblazer 100NXT Kayak Use a Malone J-Style Kayak Carrier on a 2012 Subaru ForesterFrom what I could find on your Pelican Trailblazer 100NXT kayak, you should have no problem transporting it on your 2012 Subaru Forester using a Malone J-Style Kayak carrier like the Malone FoldAway # MAL98FR. The Pelican Trailblazer 100NXT kayak has a pretty standard shaped hull and weighs 36 lbs., therefore the Malone FoldAway Kayak Carrier # MAL98FR will work to carry your kayak. The # MAL98FR has a weight capacity of 75 lbs. You will need crossbars on your Forester to use the Malone...
view full answer... - Recommended Upgraded Crossbar System for a 2017 Mitsubishi Outlander With a Bare RoofI spoke with Thule and they were able to confirm that there actually are not any corresponding fit kits for the Traverse Feet and your 2017 Mistubishi Outlander with a slick roof. With that being said, your only option is to upgrade your roof rack to a newer system like the Yakima CoreBar Crossbars # Y00421, with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 11 for Yakima SkyLine and Control Towers # Y00233. This system will work with your bare roof, has a maximum...
view full answer... - Availability of a Roof Cargo Basket For 2011 Ford Transit Connect With Fixed Factory Roof MountsI would recommend to use the Yakima Roof Rack System with a Yakima cargo basket. For the roof rack, you will need 3 parts: Landing Pad 11, # Y00233 SkyLine Towers, # Y53TR RoundBar SL Adapter, # Y03536 Round 48 Inch CrossBars for Yakima Roof Rack System, # Y00408 I am including a link to a video review on the Yakima roof rack system. With the Yakima roof rack installed on your vehicle you can then install the Yakima LoadWarrior Roof Rack Cargo Basket, part # Y07070-74. I am including...
view full answer... - Roof Rack Options for Adding a Yakima SkyRise Tent on a 2011 Subaru ForesterTo determine if the factory crossbars on your 2011 Subaru Forester are compatible with a rooftop tent you will first need to see if there are any specifications for the tent. For example, the Yakima SkyRise, part # Y07436 for 2 people, requires that your roof rack be supported and no higher than 98" off of the ground. Both the roof of your vehicle and the roof rack need to have a minimum load capacity of 165 lbs as well. I have attached a photo that you can use as a guideline for your...
view full answer... - Recommended Roof Rack with Bike and Kayak Carriers on a 2017 Mazda 3 with Fixed Mountig PointsWe do have black roof racks that install into the fixed mounting points on your 2017 Mazda 3 that don't use the clamps around the door frames. Although, you're correct that all of them stick out passed the feet so they aren't the OEM look you're trying to get. The rack I recommend is a Yakima system with their 50 inch JetStream bars which uses: 50 inch JetStream Crossbars # Y00425 SkyLine Towers # Y53TR Landing Pad 11 # Y00233 I've linked a video of the SkyLine towers being installed...
view full answer... - Recommendation for Carrying 2 Kayaks on a 2017 Subaru ImprezaWe do have a hitch that will fit your 2017 Subaru Impreza, which is the Draw-Tite # DT24959. If you choose to tow a Kayak trailer, this hitch will work well. However, when I looked up the owner's manual for your Impreza it said that your vehicle was not made or intended for towing trailers. I have another solution that will not void your vehicle's warranty. Yakima has a roof rack system that will allow you to carry both Kayaks, as long as you do not go over your Subaru's roof weight capacity....
view full answer... - Recommended Roof Rack and Ski/Snowboard Carrier for 2015 Mazda CX-5 with Naked RoofI highly recommend using the Yakima JetStream roof rack for your 2015 Mazda CX-5 because it has a 165 lb weight capacity, mounts directly to fixed points on your roof, and allows you to use a variety of other roof mount accessories. This consists of the SkyLine Towers # Y53TR, Landing Pad 11 # Y00233, and then your choice of JetStream Bars: 50" Black # Y00425 60" Black # Y00426 70" Black # Y00427 You can then use the Yakima FreshTrack # Y03093 and the Lock Core Set # Y07206 to make...
view full answer... - Roof Rack and Kayak Carrier Recommendations for 2003 Mazda Protégé 5You'll need to begin by adding a roof rack to your Mazda, which consists of the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 11 for Yakima Control Towers - Qty 4 # Y00233 Once the rack's in place, the # Y04074 SweetRoll Kayak carrier would be an excellent choice for you. Tie straps for the kayak to the crossbars and for the bow/stern are included.
view full answer... - Yakima Roof Rack Components Needed For A 2015 Kia SoulIdk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
view full answer... - Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - Yakima roof rack for Mazda 2Yes, I confirmed with Yakima that there is a roof rack available for your 2012 Mazda 2 that uses Yakima Round 48 inch Crossbars part # Y00408. To complete the roof rack you would need the following parts: LandingPad 11 part # Y00233 Yakima SkyLine Towers # Y53TR Yakima RoundBar SL Adapter # Y03536 I confirmed this with Yakima.
view full answer... - Yakima Roof Rack Parts for 2018 Subaru WRXYes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
view full answer... - Cargo Box Recommendation for a 2014 Subaru Forester with Fixed PointsFor a Yakima roof rack confirmed to fit the fixed points of your 2014 Subaru Forester you would need the SkyLine Towers and RoundBar SL Adapter parts # Y53TR and # Y03536, 2 sets of the LandingPad 11 # Y00233, and a set of 2 48 inch crossbars # Y00408. The Yakima MegaWarrior # Y07080 has been confirmed to fit this rack as well. I checked with Yakima and all of their cargo boxes we carry are confirmed to fit this rack. I attached a link to al of them to the right.
view full answer... - Roof Rack Recommendation for 2016 Subaru WRX STiWe do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
view full answer... - Longest Roof Rack Bars That Fit a 2015 Subaru Impreza HatchbackSince you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
view full answer... - Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side RailsFor your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
view full answer... - Roof Rack for 2017 Subaru Impreza Sedan with Naked RoofYakima does have their Jetstream roof rack that fits your 2017 Subaru Impreza with a naked roof with the part numbers # Y00425, # Y53TR, and # Y00233 which is a super high quality roof rack that's easy to install and quiet but we also have other options like the Inno part # INXB123-130, # INXS350, and # INTR145. We have a few others two that you can check out at the link I attached to this page.
view full answer... - What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof RackFor your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
view full answer... - 2008 Mercedez C300 Sedan Yakima Round Bar Roof Rack RecommendationFor your 2008 Mercedes C300 the Yakima Skyline roof rack components you need are # Y00408, # Y53TR, # Y03536, and # Y00233 which includes the Landing Pad 11.
view full answer... - Recommended Roof Rack for 2017 Subaru Impreza SportI do have a solution for you, however the Rola Sport APE Series Roof Rack referenced in your question is not a confirmed fit for your 2017 Impreza Sport with no existing rails or crossbars. For a similar aero style crossbar, I recommend the Yakima Roof Rack that consists of # Y00421 for the two 50 inch crossbars, # Y53TR for the SkyLine Towers and # Y00233 for the Landing Pads. This roof rack is confirmed to fit your vehicle and has a weight capacity of 165 pounds, although you will also...
view full answer... - Roof Rack Similar to Whispbar Recommendation for 2014 Tesla Model S with SunroofI have a solution that will work well for you but Whispbar was actually bought out by Yakima. So to get the most similar roof rack to a Whispbar for your 2014 Tesla Model S with a sunroof, you'd want the Yakima JetStream roof rack part numbers # Y00426, # Y53TR, and # Y00233. With this you'd have a very high quality roof rack like you are wanting, that has aero shaped bars which will allow you to have minimal wind noise.
view full answer... - Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.