To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 46" Long:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2018 Jeep Grand Cherokee, we're going to be test fitting the Inno Square Crossbar Roof Rack System, consisting of part number INB127. These are the square crossbars, 50" long. We'll also be using part number INTR, which are the Inno feet, for the Square Crossbars, particularly for track systems, or flush side rails. Finally, part number INTR132. This is the Custom Fit Kit for the Jeep Grand Cherokee.The Inno Square Bar Roof Rack system is great for carrying a wide variety of accessories on your roof, while freeing up space inside your vehicle. This can carry anything from bike racks, to cargo baskets, to cargo boxes.
The square bars are strong and durable, however, they will make some noise while you drive. Inno does offer several fairings that you put in front of these to cut down the wind noise and drag, which you can find on etrailer.com. The endcaps are lockable, to secure your roof rack system to your roof as well. They also help protect your actual connection plates here underneath from all the weather and elements, while you drive.Next I'd like to give you a couple of quick measurements. From the center of the roof, to the bottom of the bar is going to be about 2".
From the center to the top of the bar, is going to be about 3". It gives you enough space to fit most factory roof rack accessories through, without interfering with your roof, or making contact with your roof. Both bars combined do have a carrying capacity of 220 pounds, but you always want to double check with your vehicle's manual, to make sure your roof can withstand those weights.Now that we've got over some of the features of the roof rack system, let's go ahead and show you how it installs. We have our front bar already installed into our flush mounted side rails, and we have our rear bar partially assembled on our table here. Here's the Inno foot pack, and the fit kit, that we're going to need to install on the other side here, as well as the keys for our endcaps, the plastic end for our square bar, and the tool that comes included with the fit kit, to install everything.First, we're going to start by inserting our leg here onto the other end of our square crossbar.
We'll remove our endcap first, using the included keys. We'll slide this end onto our square bar like so. Then we can start installing our fit kit. Next, we'll take our plastic bracket piece here, and we'll fit it underneath the top portion like so. Then we'll flip the bar, and start installing our metal brackets on the underside.
We'll take our bolts with the lock washer and flat washer. Bring them up underneath, and then take our metal brackets, making sure they're facing the proper direction. We'll just loosely install those for now. There we go. We'll repeat this on our opposite side.Our final step, before we set this onto our roof rack system, we'll put our endcap in place, just to make sure that doesn't slide off. Now we can install it. We'll set out bar in place, just being careful, because we don't want to scratch up the vehicle here. You want to make sure how it sets inside the track here, that it's in the right location. You can see how it hooks on the backside here. It grips in this little channel, and on the inside, it grips on the channel the opposite way.Next, we'll measure from center of the bar, to center of the bar, to get a crossbar spread on both spread on both sides. Then we'll measure for our crossbar overhang. Once that is even on both sides, we'll take our included tightening tool, and tighten the bolts down, which will bring those brackets up, and secure the roof rack to the flush mount side rails. Next, will take our endcaps, we'll put those in place. Now we're ready to load up our gear, and hit the road. There you have it for the Inno Square Crossbar Roof Rack System, on our 2018 Jeep Grand Cherokee.
Average Customer Rating: 4.8 out of 5 stars (76 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.I was using Yakima Bowdown Kayak racks on my OE roof racks. The shape of the OE cross rails just didn't work well with the racks, and they were always loose. I installed the Inno square tube racks from Etrailer, and all is right in my world. Easy installation (thanks for the detailed instructions!) and a solid feel! No whistling, either! Quick shipment, best price anywhere! Thanks, Etrailer!
These bars are excellent. I like the coating to protect whatever you're hauling. There is absolutely 0 flex with my kayak mounted, unlike the aluminum aero bars I upgraded from.
Easy to install, great instructions, looks good, will use for bikes and kayaks, a welcome edition to our gas saver car
Shipping took considerably longer than originally promised. Product quality & value I consider both to be good.
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
these work great in the roof style of the 2007 forester. They DO NOT come with the parts needed to attach them from etrailer so read carefully to make sure they will work with your vehicle.
Missing Parts - I am missing two of the end-caps for the INB117. What is the deal with INNO quality control that it cannot get 4 of these in a box at the same time and tape it shut? I did a search on Google and apparently this a a known QC issue!
Fit perfectly on our 2007 Subaru Legacy Wagon w/flush mount rails. We had our doubts but put our faith in C.S. Rep. He was right (of course)!! The fit on the stock rails perfectly. My husband didn't really have trouble installing them at all. We also got the Inno Fit Kit Hooks and the Inno Square Crossbars. Just came back from vacation. They were perfect for my husband's bike. (We did have Thule rails from an earlier bike rack. They fit into the Inno system w/o a problem. Thank You ETrailer for ALL your help. We couldn't have put it all together without you knowledge. Perfect!
We bought this along with the INTR102 Custom Fit Kit. We used this to mount Thule crossbars and a Thule Adventurer cargo box on a 2001 Subaru Forester. Everything fit perfectly. The Inno mounts were completely compatible with the Thule crossbars. The fast and accurate shipping helped avert a crisis before a cross country trip.
I got these to replace my OE roof racks. The square shape is perfect for Yakima Bowdown kayak racks. Solid!
One of the lesser expensive rack kits for the Mazda5. etrailer delivered excellent! They had items in stock and shipped quick. I finally had a chance to install it this evening. My only frustration was evening out the bars. Measure, adjust and measure and adjust. I'll look into getting a fairing to reduce wind noise.
Fit was good. Hauled a roof top carrier 2000 miles with no issues. Wind noise was minimal.
The customer service representative was friendly, answered all of my questions, and arranged for same day shipment. It arrive missing some end caps, and when I notified her of this, she had a replacement set sent out. I would recommend etrailer for any of your bike roof rack purchases
Product arrived on time and packed very professionally. Was very satisfied with the overall quality of the product. Everything went right together and fit perfectly. I dealt with a gentlemen named George J. He was very professional and extremely helpful throughout the whole process with updates letting me know how my order was going. Very happy with the product.
I got the whole kit...on Marc C's recommendation. He was so very patient and helpful! The kit is great. I am not so versed in doing such things so my neighbor put it on the car for me. He was just over and over again extolling the Praises of the instructions. He said they're the best ones he ever used. It fits on the car, it feels solid, and it looks great. I'm very very happy with it. Thank you so much!
Great Product! Shipping was very fast for free shipping, and product was packaged well. Installation was a breeze, and only took about 30 min. I am very pleased with my purchase!
Easy to install. Installed with the wife in about 30 minutes with the Inno foot pads. No wind noise.
I am more than pleased by the service that I had at etrailer. I was looking for a very old roof rack for my Subaru Legacy 2007 and etrailer had it. I was suspicius about it so I wrote them and got a quick and friendly answer that confirmed the fit and availability. Delivery was quick and the tracking from etrailer website was outstanding.
This Inno rack is a sturdy, basic rack. What I like best about it:
- It actually mounts to the roof tracks on my 2015 Jeep Grand Cherokee (with the INTR132 fit kit), instead of to hard points on the roof like many other racks.
- It lets me use my Thule bars and accessories because Inno and Thule bars are the same size.
- It was much less expensive than the other racks I looked at.
- It is pretty easy to put on and take off.
What I don't like as much:
- The locking covers that go over the towers are pretty flimsy, and look like they are on crooked even when installed correctly
- This rack is quite noisy on the Grand Cherokee, but I think that's just the nature of the rectangular bars. (But since it is easy to take off, I plan on only putting it on the car when needed).
Also, thanks to the folks at etrailer for helping me figure out what would work best for my needs!
Had used Thule bars for years on multiple cars. Sadly found out Thule didn’t make a mount for my new Lexus GX. And I was about to throw in the towel, but found that the ”Inno” footing would work with my car and with my old Thule bars! They work great on my new car. Thank you etrailer for having the only website search engine that could recommend the parts I needed.
Cheers!
Excellent quality rack adapter. I have used Inno products for a number of years and they are just as good as Thule or Yakima and lower in price. I am using these feet with a square bar system I have had for years. Got a new vehicle with different rails and was please that there were adapters available from Inno.
I had been looking a very long time for a roof rack for my 2014 Jeep Grand Cherokee. I wanted round or tubular crossbars, different from the “air foil” style, which were the only kind available from the factory and the many imitators. I finally found etrailer, and these fit the bill perfectly. The attachments fit the rails just like the factory model, and hold the rectangular cross bars firmly. A sturdy and solid product. And even with free shipping they arrived the morning of the second day after I ordered them, in time for the trip I was planning to take with them.
I was really pleased with the price and how quickly my crossbars arrived. Also, being able to access the installation guide on the website was awesome because the instructions that came in the box were more general.
I have only had these on for a few days but all seems well. Very little extra noise although I can hear a bit when I'm going over 100 km/h but nothing too bad at all. Installation was extremely simple and straight forward. Took me all of 20 minutes and most of that was just making sure the cross bars were exactly parallel. These shipped to my house (just outside of Toronto) in around 4 days with no extra border fees which was fantastic. I only wanted these to strap a canoe onto the roof of my Jeep Cherokee Trailhawk so I didnt need anything too heavy duty or bulky and this fits the bill perfectly.
Pros: adjustability, price, sturdy construction, decent appearance.
Cons: square tubes = wind noise, must remove rubber ends to mount/dismount, be careful not to strip out the hex screws
Overall impression: A good, versatile occasional use rack if you don't want a clamp on.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.