To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 50" Long - Silver - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
How's it going, neighbors This is Ed here with etrailer.com, and we're taking a look at the Yakima Roof Rack System on our 2022 Chevrolet Colorado. Having a roof rack to your vehicle helps solve the issue of not having enough cargo space, especially when you have a smaller pickup like the Colorado. It allows you to make use of the negative space on top of your truck to get those bigger, bulkier items on the road with you for your journey. So for example, if you want to get a rooftop carrier, rooftop basket, or even a bike carrier, you'd be able to take advantage of that space without taking away from your bed or your passenger area. The JetStream bars are a arrow-type bar, so it's shaped like a airplane wing to help cut through the wind resistance. On the Colorado, you have a great amount of space between the top of the bar and the roof, so that's gonna work for most rooftop accessories that clamp around bars.
As far as your towers, they actually make a contact with the gutter right in here, and it contours to the ridge of the vehicle. So that's gonna allow you to get a nice secure fit on top of your truck. While fitting the Yakima system to the Colorado, I noticed that the crossbar for it is very limited as far as how much space you have, considering it is a smaller vehicle with only. Well, it has two doors, but not a lot of space. So you're gonna be limited as far as how far you can spread, as well as what you put up due to your antenna.
So those are a couple things to consider with all crossbar on the Colorado. Overall, the Yakima crossbars are really good addition to the top of your Colorado. Installation is a little bit tricky, but I'll get you through it. So let's take a look, and I'll show you how to get it installed. We're gonna start our installation by removing the end cap from our JetStream bar.
Kind of pull the tab up and just pull it forward. There we are. And now we're gonna slide our tower using this track here along the T-track. We want the inside of it pointing towards the metal, and we're just gonna get it lined up. And it's a little tight, so I'm gonna use my Yakima tool to loosen the inside bolt in here to allow it to go down our track a little easier.
So now, I'm gonna use the included tape measure ruler that's on the bottom of our bar to set our spread on both sides, and then I'll fasten down our towers until I hear the click right here. (bar clicking) From here, we're gonna take our Fit Kit and we're gonna make sure our arrow is pointing out, and clamp it down on the bottom of our towers right here at these points and just make sure it clicks on. And I've already done that on the other end. So now, we're gonna take our bottom part of our Fit Kit and install it on the roof of the vehicle. With our towers and bar assembled, we're gonna just test fit our initial measurement, so we're gonna make sure everything is good to go. And once we confirm that we have everything in the correct positioning with the JetStream tower, then we're gonna use that same nut to fasten it down until we click using the Yakima Torque Wrench. So from here, we're gonna go to the next step of the install by adding the clip underneath the door jam. We're just gonna fasten down our bolt. (bolt clicking) We're gonna drop it back into our position where we've measured. We're gonna open this front gate here and use the clip for our Fit Kit. There's a small channel under here where it's gonna slide in, and there's a hook on this metal screw that grabs the top of that bracket. And then when you fasten it down, it'll secure your tower to the roof of your vehicle, and you'll know that you've gotten to the required torque requirement once your wrench clicks. (wrench clicking) Put down the gray cover, and now put the cover over our tower. (cover clattering) This has been a look at the installation and some of the features of the Yakima Roof Rack on our 2022 Chevy Colorado. Have a great day.
Average Customer Rating: 4.8 out of 5 stars (146 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Works perfectly on my 2023 Chevy Silverado. The rubber pads are soft enough to prevent scratches, yet firm enough to support the force of being cranked down on the roof. They fit perfectly in the ridge near the edges of the rough.
Follow the instructions, and you can't go wrong on the self installation
Yakima Baseline with Yakima CBX 18 Cargo Box fitted on my 2012 Toyota Corolla S Sedan 2012.
Instructions were clear and roof rack was easily installed.
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Excellent service. Free shipping and order arrived a day earlier than short turnaround.
You guys provide great products and excellent customer service.
Thanks
Works just like the old towers except they pivot to give a snugger fit on the truck, which makes this tower fit easier and less likely to come loose or break like the other towers. Also it is nice to have a rack on the front of the cab for long items, like full size canoe, that would be too long and need the extra length to fit. Without the extra tower the canoe has to shift back and hang off the back too much and securing the front of the canoe is more challanging.
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;)
These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp.
Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise.
These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done.
They look good, too;)
etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away.
I’m using these towers in conjunction with the JetStream cross bars. Assembly and setup was easy, all the tools you need are provided, except perhaps a tape measure for mounting. Looks and feels solid and well made. This is my second set of Yakima towers and cross bars. I plan to use this setup for an old roof top hard shell case and for my mountain bike to get to the trail head.
After completing the installation I took it out for a spin to check for wind noise at highway speeds. No discernible noise, I’m very happy about that as I really don’t want to remove these when not needed. For reference these are mounted on a 2019 Subaru Forester Touring with factory raised rails. Plenty of clearance for attaching equipment and gear.
Side note: the gentleman that assisted me on the phone while ordering was very pleasant and helpful, got me the right products very quickly as I was in a time crunch. Two thumbs up!
Solid build quality and easy installation on my '21 Mazda CX-5.
Well packaged and on time
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
So far so good. Purchased these clips to use on a 2022 GMC Canyon. Yakima's fitting instructions worked perfectly and the whole system seems really solid. The clips contour nicely with the shape of the door jamb.
Great product - very good quality. I liked the fact that I could keep the risers mounted on my car, but could remove the cross bars. It took me awhile to install - but I'm not very mechanically inclined.
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit)
One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes.
Used in rain at least once, (sustained 60mph), with no leaks.
Yakima towers and crossbars were solid and easy to install with the very well written instructions. We used them on 2 cross country trips with any loosening. They were easy to remove. We plan to use them again as the need arises.
Good condition quality. Good and detailed instructions but aittle tedious install.
Perfect fit for our car, much better than any OEM rack I've ever seen
Roof rack parts were ordered correctly and shipped quickly.
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The Yakima crossbars, along with the RidgeLine Towers and the the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend.
Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems.
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.
Yakima Jetstream cross bars.. nice bars worth the extra money. can be adjusted for pitch/angle of attack to "tune" the air profile.. mine have absolutely no high speed wind noise or whistling.. rubber weather strip underneath further smoothes the bar profile.. quietest roof rack system I have ever owned..
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.