MORryde Chair Buddy Dining Chair Holder for RVs

Video Transcript for Review of MORryde Kitchen Accessories - RV Chair Holder - MR87RR

Hi there, I'm Michael with etrailer.com. Today we're going to take a quick look at our nifty little device for you RV owners. This is a Chair Buddy. It's going to help keep your dining room chairs from rattling and potentially tipping over as you're traveling. That will obviously help reduce the damage to the chairs themselves, but also any potential damage to other items that you may have in that same area. So the way this works, it's very simple, it is going to mount to the center post on your table.

Salesperson You can see it does have this arm that kind of has a T shape to it, and then we also have a gas strut over here. So as we have this mounted, right now it's in the up position so it will be stored up and out of the way, but then when we're ready to travel we'll just put our chairs in place. And then we can bend that arm down and that gas strut is going to apply quite a bit of pressure to those chairs to prevent them from wobbling and falling over. Then, when you're ready, you can simply push it back up into the disengage position. Which will be much easier for you than it is for me once you have this mounted in place.

And then it's going to be up and out of the way again so you're not going to have to worry about hitting your knees on it while you're at your table enjoying dinner, or anything like that. So this mounting bracket here is right about two and an eighth of an inch wide and three and three quarters of an inch tall. So you are going to need table posts that's at least three inches wide and a flat surface area of about four inches tall for this to mount to. If you don't have something like that on your table, they do make this bracket that will allow you to mount up onto the table and then mount your Chair Buddy there. So that you have that vertical surface.

So you can find that here, at etrailer, using the part number that you see on the screen. But if you do have an upright center post that will face your chairs, then you won't need that. You'll just be able to install this with the included hardware. They do give you a very detailed instructions with pictures on how to get it installed so that all your chairs will be nice and stable as you're going down the road. Even if you hit a big pot hole or something they'll stay in place and you won't have to worry about them falling over.

Now there are some specifications as to dimensions to make sure that it's going to fit your table and that sort of thing. I would encourage you to come to our website. Check that out. But this is going to be a really nice option, I think, for most tables, to make sure that your chairs stay in place. It does have this hard plastic sleeve on each side to help protect the material on your chairs. So you're not going to have to worry about snags or damage to your chairs or anything like that. So I think this would be a very nice option to make sure that those chairs stay in place as you're going down the road. That's going to complete our work for today. Again, I'm Michael with etrailer.com. Thank for watching..