etrailer RV Dinette Table - Recessed Mount - 38" Long x 30" Wide - Cherry Wood - 2 Legs

Video Transcript for Review of etrailer RV Dinette Table - 38" x 30" Cherry Recessed Mount- 2 Leg - e67BR

Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Recessed Mount RV Dinette Table. This is a double leg dinette table that will either replace a previous RV table or add a table to your RV's dining area, so your friends and family can gather around, share meals or play board games, that sort of thing, on those rainy days when you can't get outside. This is a Recessed Mount, so if I take the table off here you can see when we remove the table, these brackets in the floor are going to be installed in the floor so we're not gonna have to worry about tripping over them like we would with brackets that stick up off the floor, so it's gonna create more floor space for us for entertaining friends, that sort of thing, we wanna have more room to freely move around and that's going to provide lots of opportunity for us there. (wood ticking) Put this back on, so see how this is gonna fit in place. (metal snicking) Very simple to take off and put back in place.

These do come in three different laminate finishes to compliment your existing decor, so you can see the one that I have here is the cherry option, it's also available in maple and white. You can see all three options on the screen there, so both the maple and the cherry are gonna have that wood grain. Your maple is a little bit more of a tan, yellowish kinda color. Your cherry is more of a kind of an orange color, a little bit darker wood tones but you can see that wood grain design and that rich color in this finish here. underneath that laminate There is going to be an ultra strong (knocks on wood) high density EPS foam core, so it is very solid and durable, yet lightweight enough that we can easily take it off, move it around and put it back in place.

(soft thump) So, having that foam core is going to make it a very convenient tabletop to remove so that we can make up our extra bed or make space for our friends, and that sort of thing. On the edge here, we do have this edge banding that reinforces the table sides and seals moisture out, so it's going to help prevent the table top from peeling, cracking or warping. You do have a choice, you can either have the black trim like we have here for a nice high contrast look, or we also have color matching options so that you have a little bit more closely coordinated appearance, you can see those side by side on the screen there, so you have your choice there. And then we also have five different sizes for each of those options, you wanna make sure you're getting the one that's going to work with your space in your RV. And so the one that I have here is 42 inches long by 30 inches wide, all of our tabletops are 30 inches wide but we do have different lengths for you, from 36 inches up to 44 inches in length so make sure that you're getting the right one and that's gonna fit in place, if you are making your extra bed or just fits your RV dining area altogether.

So this table will stand on the two steel legs, these are two inches in diameter (metal clinking) so they are gonna be very sturdy for you, it's gonna provide about 26 and a half inches of clearance from the bottom of the table to the floor. If I stand next to it, I'm a pretty big guy, I'm about six three so you can kinda see where this is going to come up on me. If I we're sitting here it does provide a little bit of room there, not a whole lot but still enough for me to scoot in and sit in and enjoy breakfast, and that sort of thing. And we do also have these tables available in a single leg option, so just whichever option works best for your setup, if you have a single leg I would recommend replacing it with a single leg for you. If I take this off here, you can see that our legs are gonna be attached with brackets on the bottom of the table, as well as the ones that are on the floor.

The brackets are about a sixth and five 16th of an inch in diameter, I've got an extra one here so you can kinda see what this will look like, and you can see it is gonna stick down into your floor quite a bit so it is going to require a two and a half inch diameter cutout for this to fit in place, and you are going to. We do also have the surface mount options available if you don't want to worry about having a hole in your floor to get this mounted. If you're worried about hitting a runner or something underneath there, just depending on your setup, we do have those surface mounts available. Those are gonna stick up so they are a little bit more of a tripping hazard, but the benefit is you will get about two inches of extra height and clearance for your table because you're not gonna be going down into the hole they're gonna be sitting right about on the surface, thus, you will get a little bit more clearance with that other option but if you do want that flushed look this is gonna be the way to go for you so that you don't have to worry about that tripping hazard. (metal clinking) Very simple to get these installed, they do include the screws to get these drilled in place for you. (metal clinking) Simple installation on the floor there, as long as you know what's underneath your floor and can have that hole cutout. And then on our table itself, very simple, mount these in place, and you can see we do have these three stickers here that are going to be a suggested mounting place for you but there is an internal 26 gauge galvanized steel screw plate that is going to be in the center of the table. So no matter what size table you have, that screw plate is 30 inches long by 10 inches wide and it is centered on the table, so that's where you want to screw in. So if your original leg doesn't line up with what we have here, as long as you're within that screw plate you can mount it wherever is gonna be most convenient for you. You can see we do have some screw holes in this one, they do not come pre-drilled that's just the remnants from some of the other videos and photos that we've been doing on these tables. We don't recommend that you pre-drill your holes, just use the included screws to drill right into the bottom of the table, that's gonna give you the best, most solid hold there. So having that screw plate is gonna make sure that your screws have something solid to grab hold of, and ensure a steady attachment so you don't have to worry about them coming loose in that foam construction, that screw plate is there to give it a nice solid hold. So if you are looking to either upgrade your RV's dinette table or if you're wanting to add a table into your RV, this is gonna be a great way to go. Like I said, we do have lots of different options to match your space, the color, your trim preference, the size, single leg, double leg, lots of different options available for you so make sure you're getting the right one for you. And that completes our look for today. Again, I'm Michael with etrailer.com, thanks for watching.