Optronics Rear Facing LED Light Bar w/ Supplemental Turn Function - 4,000 Lumens - 29-5/8" Long
(64 reviews)
Price: $104.84
In Stock
Optronics Rear Facing LED Light Bar w/ Supplemental Turn Function - 4,000 Lumens - 29-5/8" Long
Item # UCL32CDTB
Our Price: $104.84
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (64)
- Q & A (0)
- Videos (1)
- Photos
- Used (1)
Optronics Off Road Lights - UCL32CDTB
- Floodlight
- Light Bar
- 29-3/4L x 2-1/4T x 3D Inch
- Universal Mounts
- Single Light
- LED Light
- Optronics
- Black
Rear-facing LED light bar mounts to your truck or trailer to illuminate the loading area with bright white light. Red LEDs on ends of light bar provide supplemental turn function. Hardware and 4-wire harness included. 18 Diodes.
Features:
- Rear-facing LED light bar with supplemental turn function mounts to your truck or trailer to illuminate the loading area
- Red LEDs on ends of light bar work independently to provide supplemental turn function for increased safety
- High-quality light output from single row of 18 LEDs
- Flood beam illuminates a wide area
- LEDs have a 200,000-hour lifespan
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows for improved heat distribution
- Channeled fins on housing let heat quickly dissipate to optimize LED performance
- Durable, water-resistant construction
- Black powder coated die-cast aluminum housing is rustproof
- Tough polycarbonate lens is impact resistant
- IP65 rated for protection against dust and moisture
- Compatible with 12V DC and 24V DC systems
- 4-wire harness with 24" long leads
- Black wire - ground
- White wire - power
- Green and yellow wires - supplemental turn function
- Easy installation
- Sliding brackets are adjustable for desired fit on application
- Stainless steel mounting hardware included
Specs:
- Light output:
- Effective lumen output: 4,000 lumens
- Raw lumen output: 7,200 lumens
- Diodes: 18
- Overall dimensions: 29-5/8" long x 2-5/16" tall x 2-7/8" deep
- Light bar dimensions: 28-1/2" long x 1-1/4" tall x 2-7/8" deep
- Lead wire length: 24"
- Power draw:
- At 12.8V DC: 6.8 amps
- At 24V DC: 3.1 amps
- Input voltage: 12V - 24V DC
- Lifetime warranty on LEDs
Raw Lumens vs. Effective Lumens
Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing. This light has a 7,200 raw lumen capacity and produces 4,000 effective lumens.
UCL32CDTB Optronics Rear Facing Weatherproof LED Off Road Load Light Bar for Gooseneck Trailers - Turn - 7,200 Raw Lumens - Single Row - 30" Long - Flood Beam
California residents: click here
Video of Optronics Rear Facing LED Light Bar w/ Supplemental Turn Function - 4,000 Lumens - 29-5/8" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Off Road Lights - Light Bar - UCL32CDTB Review
Speaker 1: Today we're taking a look at the Optronics LED Off-Road Light Bar. The LED light bar delivers a bright daylight white light ideal for off-road driving, and on the ends we have the red LEDs that provide supplemental rear-facing turn functions. This is a high quality light. We're looking at really great light output from a single row of 18 LEDs. These LEDs have a 200,000-hour lifespan. Optronics also puts a lifetime warranty on the LEDs.We're looking at durable surface-mount technology when it comes to the construction of the LEDs circuit board.
That technology better withstands shock and vibration and allows for improved heat distribution. Now, on the exterior, the unit features channeled fins on the housing, which really lets heat disperse quickly to optimize LED performance.It features a durable weather-resistant construction. We're looking at a black powder coated die-cast aluminum housing that's rustproof, a tough polycarbonate lens that's impact-resistant, and an IP65 rating for protection against dust and moisture. This is compatible with 12 volt DC and 24 volt DC systems. When it comes to the wiring harness, we have a four-wire design.
So, in this case, the black wire's our ground wire, white wire's our power wire, and then the green and yellow wires are for the supplemental turn function.We're looking at a nice easy installation. It comes with three mounting brackets. Now, I have one of them assembled just to show you kind of what it looks like, but these sliding brackets slide into the channel here on the back. They are adjustable for desired fit on the application. Also, you can tilt as needed.
So, it's a really nice design. You have your single pedestal style mount, and then this portion right here is the portion that slides into the channel here on the back of the light.So, basically how it works is you take one of the mounts. You place it into the channel, and then you can slide it where you need it for you application, tighten it down and then adjust your tilt. Get the angle you need for your application and then tighten the rest of the hardware to secure it in place. Again, it does come with three of those mounting brackets.
The hardware that it comes with is all stainless steel, so you don't have to worry about rust or corrosion.We're going to go over the measurements and then I'm going to hook it up to power. That way you can see what it looks like. So, overall, edge to edge it's 29-5/8" long. The overall height is 2-5/16" tall, and the overall depth is 2-1/4" deep. Now, I did those measurements without the hardware installed because the hardware, again, it's adjustable. So, you can tilt it, you can get the angle you need, which is really going to vary the measurements with the hardware installed, but those are the measurements of just the light bar as you see laid out here on the table.We're going to go and hook it up to power. That way you can see what it looks like with some power running to it. Again, in this case, our white wire is the power wire and then our black wire is our ground, and then we have the yellow and green wiring, which would be for the supplemental turn signals. So, it's a very bright unit, a nice consistent light output, super bright design.The effective lumen output is 4,000 lumens. The raw lumen output is 7,200 lumens. Again, it contains a total of 18 diodes or LEDs. Power draw at 12.8 volts is 6.8 amps. Power draw at 24 volts is 3.1 amps. So, when you activate the turn, you could see how that red lights flashes on, does the same thing if we connect the turn signal wire to our other wire. That's going to do it for today's look at the Optronics LED Off-Road Light Bar.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Arrived Damaged
Customer Reviews
Optronics Rear Facing LED Light Bar w/ Supplemental Turn Function - 4,000 Lumens - 29-5/8" Long - UCL32CDTB
Average Customer Rating: 4.7 out of 5 stars (64 Customer Reviews)
Rear-facing LED light bar mounts to your truck or trailer to illuminate the loading area with bright white light. Red LEDs on ends of light bar provide supplemental turn function. Hardware and 4-wire harness included. 18 Diodes.by: Lloyd 06/29/2023
Easy to install. It lights the area behind my trailer very well. Great purchase.
by: Kathy11/10/2022
We have purchased this product before with great results. These are being used on big equipment trucks.
The sales representative we spoke with Lori B. Was excellent she even did research for us to find this item, because we had ordered it two years ago and we could not find the information on it, she found it and also sent us the invoice on it. Your system was down and she called us back when it came back up. She has sent us a follow up email to make sure the product is what we needed. Now that’s customer service with a smile!
by: Paul 02/26/2021
Great light bar like having the turn si gnals!
by: Hashem05/12/2021
by: David 12/10/2023
Mounted on tractor with loader. Excellent option for night time work. Lights up work area well.
by: Rick 12/17/2022
Does it's job and lights up the road and sides to keep you out of the ditches on rainy and foggy nights. A "must have" for me!
by: Noel12/20/2019
Great light bar for the price. Perfect size for my golf cart and UTV. Very bright. Easy to install and wire.
by: Steven12/04/2020
Very nice package, Very easy to install,It took a little extra time for me. I added a remote control switch to it that I can turn on and off from hundreds of feet away.
I also didn’t want to drill holes in my bumper so I found these rare earth magnets that I attach the brackets to.
With the magnets on the bumper, I couldn’t even pull it off but I did put a wire tie around one of the cooling fins around my grill Just as a safety precaution, primarily for bumpy roads.
by: Evan12/07/2023
Never worked, and unfortunately I didn’t install it until well after the return policy had expired. Too bad, it could have been perfect for my needs
by: Jeff L12/07/2020
I really like this light bar. Very bright and works really well when I am moving snow early in the morning or at night
by: David 12/10/2023
Mounted on Polaris ATV. Great light for around the farm or on the trails.
by: Greg L.10/16/2019
This light works great. The only reason I didn't give 5 stars, is it didn't come with a switch to make it work. Used it on my Gator.
by: C C11/14/2022
Installed this on a golf cart for additional lighting. It’s been a year and it has been an excellent addition. Easy to install and all necessary hardware was included.
by: Gary10/10/2019
These lights are doing just what we wanted. Use them quite often on accident scenes
by: Casey08/13/2021
It seems to get water inside the housing and on the backside of the lens if I wash my vehicle. I thought it was sealed. It still works but only time will tell if it'll hold up
by: John 03/17/2023
Works great to see hogs on both sides of the highway ride way. But if someone is coming from the other direction turn off along way off,
by: Chris10/26/2018
Excellent light! We use it as a backup light on our 938M because the stock halogens constantly burn out. This thing has great coverage and looks plenty durable enough with cast mounts (instead of bent sheet metal) for a very rough environment like a transfer station.
by: John09/08/2019
Used lights for backup lights for my car hauler trailer!
Easy to mount and very bright!
Great product!!!
by: John N12/10/2020
Very bright at a very reasonable cost. Mounted on front bumper of Jeep Wrangler TJ with no issues and no problems over the last year. Much less expensive than equivalent lights from other sources.
by: Donna 12/31/2021
The Optronics light bar is a good quality light bar at a good price and definitely recommended to anyone wanting a light bar for their vehicle and/or UTV/ATV. etrailer is a great company to do business with. Everyone at etrailer was helpful especially Chris, and they are dedicated to customer service. It was also easy to track the order on their website. Thanks
by: Guy03/28/2023
HAVE NOT PUT THEM TO USE YET BUT THEY ARRIVED TIMELY AND IN GOOD CONDITION.
by: Phil 12/26/2020
I have these on the bumper of my service truck to check fences with. They are holding up well with the dirt road and vibration.
by: Tyler 11/24/2021
Heavy duty LED light, very bright, well made and high quality wiring.
by: Bright, big beam!12/14/2022
Bright and wide beam. Perfect for my t ractor.
by: Mark01/27/2018
Awesome! The lights were just as described,a well put together quality product! Thanks for recommending them Melissa!
25
64
Show More Reviews
See what our Experts say about this Optronics Off Road Lights
Used Items Available
Condition: Badly Dinged
Notes: dents and missing some hardware and 1 bracket
Info for this part was:
Installed by:
Cole B
Updated by:
Wilson B
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Paul
2/27/2022
Really great highly recommend for a rear light!