Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Evangeline: Hi, it's Evangeline from etrailer.com and today we are looking at our Inno Aero Roof Rack Kit on our 2020 Toyota Tacoma. Now what's great about having this roof rack is if you need to free up some space from your truck bed, you can put them up on your roof rack, as well as if you don't want to worry too much about stressing over it in complicated install, this is a good option for you. So let's take a look at the features of this roof rack. Now the first and foremost, my favorite part about this is how streamlined it looks. It really matches the whole look of the Tacoma. It's nice.
It's sporty. It looks really good, especially on a new truck like this, and it sits low profile, so it looks good, even if there's nothing mounted on it.How low profile exactly Let's see. So from our roof to the top of our bar, it's about three inches tall, so that's enough. You just have to think about that when you're driving through places, you have three extra inches on top of your truck. Some things people might worry about with this roof rack in particular is how, since it doesn't stick out, you might have a little bit less room to mount items, and let's see exactly how much space you have to mount accessories.
From that end to this end, it's about 40 and a half inches. So if that's a worry for you, you might want to consider getting another roof rack that extends out, but some people really like how low profile it is and how it doesn't stick out, so if that's something you like, then it's a very good option.Both sides of each crossbar come with locks, so there's a key to lock and you just unlock and you lock it for security. And if you're worried about scratching your truck with this easy install, it has these rubber mounts here just designed to prevent scratching, and these hooks are designed to fit perfectly against the contours of your truck, so that you can even slam it shut. So let's look at how we installed this.The first step here is to push the slider of the bar and you shouldn't be putting your finger inside that slit there, but push it out over here where it's safe. When this is out, you can then insert this plate to go from the bottom and then up, and you push the slider back inside with the plate.
If it's stuck, you can push that button down to help it slide through, all the way to the end, just like that, until it's centered inside.Then the next step is to get your base stay and this one is locked, so we get the keys and we just unlock that and lift the cover up and out. With that out of the way, you will look at this stay and this says right, so you have to have a right and a left for each crossbar. What we need to do is insert this bolt here, inside the plate, so to do that, I just put it upside down and then I try to center it over. Once it's in there, it'll just drop into place. That looks good.
Then you can just slide this out to the end. If you don't know how far or spaced they should be, it depends actually, if it's the front or the rear bar. I already installed the front bar, so the rear bar is 22 and a quarter inches.Now we have the middle marked out here and you measure all the way to the end, to where the arrow is. So right at the arrow to the middle, it says 24 and a quarter, so this should be a good placement right there. We're ready to tighten it down. With your base stay in place, you can then put the foot onto. There we go. That way. Now remember for the rear, it's a flat foot or a flat base for the base stay. There you go, that's on right there and this is to protect your car. After that foot is in place, you can then put the hook on.So to put the hook on, you have to loosen and take out this bolt first and keep the washers with you. You then insert this hook and reinsert the bolts. So if both base stays are installed onto the end of your crossbar, you're ready to put it on your truck. It's pretty nice to have a set of helping hands here so that you don't accidentally drop it on your truck, so we have Zach over here, who's going to grab the other end from up there as we set it on our truck.To figure out where to place your crossbars, you're going to use a tape measure here, and you will measure from the inside seam of the door. So from the door to the middle, for the front, it's nine and three quarters so that looks about right, and from the back base stay, it's supposed to be 17 and three quarters, so it's not exactly there. We're going to push it a little bit. So to align it into good position, this needs to be 17 and three quarters, so it should be right there. Push it up until it aligns like that, then we're going to lock it into place.If you have your base stay measured into the position it needs to be in, you're ready to use the included tool to tighten it down. Now I recommend to go back and forth while tightening it so you don't have too much tension on one side, pulling it and possibly skewing the positions of your crossbar. You tighten both sides. Just tighten it until you hear a clicking sound. There we go. That's tight in there. And to finish our installation, we throw on these caps, then we lock them down. There we go, all done.So it is a pretty good roof rack. Remember it has a weight capacity of 165 pounds, which still is a pretty high capacity. Just keep that in mind when you're driving around, how high it is and how much you can put on there, but all in all my final thoughts about it, I like how it looks and I like how easy it was to install. I like this roof rack.This was the Inno Aero Roof Rack Kit on a 2020 Toyota Tacoma..
Average Customer Rating: 4.8 out of 5 stars (605 Customer Reviews)
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.etrailer was great to order from! Going to the website makes it easy to see what roof rack will fit your vehicle. Ordering process was a breeze and the fulfillment updates were great. Ordered on the 13th and received it on the 16th so the FREE shipping was super fast. New installs of anything can always be challenging but once I read the the instructions it all went pretty smooth. Installing this Inno Roof Rack onto our 2021 Tacoma TRD Sport was pretty simple and took less than an hours from start to finish. Now we are ready to load up out Thule cargo carrier when we hit the road.
Inno has their act together. The only thing you need to install this rack is a box knife to open the boxes.
The rack was a perfect fit. The instructions are easy to understand. It assembled quickly and is secure when installed on the roof.
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
Nice fit on 2021 Tacoma Double Cab. Rack is solid and secure.
Easy to install, looks great
They worked great. Just the part I need ed
this is a great product and easy to install, especially after viewing the videos that etrailer supplies. took less than an hour. I want to thank Nicole t for helping me order the right roof racks.
Fit with the other rack I already had. I appreciated the phone call telling me the bars were out of stock. I got them as soon as they were in stock.
Instructions were a bit tough at first as each box had their own instructions and you needed all 3 boxes to complete the setup, yet after over coming that, it was a breeze to put together and they are wonderful. Well worth the money.
Good thanks
I am writing this review in the context of an owner of an old Yakima roof rack system from many vehicles before the 2021 Hyundai Tucson on which I just mounted four INNO separate sets of components to carry two bikes on top of the Tucson. Note that you need at least three sets of components to have a "base rack" system, including the hooks, in this case the INNO INK680, the INNO INSUT Feet and the INNO INB137 set of crossbars. The feet are rubber coated metal so that they will not mar the paint where they clamp to the edge of the roof just above the doors. The rubber pads are also substantial to provide a slip-proof and paint protecting bottom for the INSUT feet. Read through all the directions for all the components before beginning installation, perhaps even "rehearsing" all the steps before actual installation with tightening everything. The instructions could be clearer, but with practice walking through all the steps they make sense. Once installed, I could grab any part of the completed system and pull upwards, sideways, forwards, and backwards without any play or slack in any of the components. In fact, it was easy to rock the whole car side to side without budging the INNO components at all. Compared to the old Yakima system, the INNO is just as sturdy and substantial if not more so. Just to replace the Yakima "feet" to use my old round Yakima crossbars would have cost more than the total of the three INNO components needed to get the base system. Even better, the INNO system came with included locks to lock the system to the vehicle. Many years ago, the Yakima four lock cylinders were $[XX] extra - probably much more now. So, I think the INNO is at least as sturdy and capable for much less money.
Feels premium and was pretty straight forward to install. I think it looks really good on the 2019 Honda Accord Sport. I plan to pair it with the Inno Wedge 660 cargo box. So far, it seems really well made and has a rubberized texture throughout. I installed it by myself in about 30 minutes without the instructions. It also shipped in only 2 days.
These Inno racks are very high quality, and the installation is straightforward. They look good, too.
I've been a happy etrailer customer for years. Sales staff helped me pick out the right roof rack setup for my new 2023 Escape that worked with my low-profile rails. 3 separate boxes of pieces but they all came together perfectly. Very happy with my purchase and etrailer customer support! Rack is solid, low wind noise and will work with the accessories I need, kayak carrier and cargo basket.
THEY DID IT AGAIN! I was looking for roof racks for our 2012 Honda Crosstour. OEM was not available. I called Etrailer and spoke to Anna and she listened to make sure we got just what we needed.Today I'm going to install and hope they fit our needs. I'm really impressed with Etrailer and there customer service! They have taken care of me many times with several different vehicles! Thank you
We bought this along with the INTR - Inno Feet for Square Crossbars. We used this to mount Thule crossbars and a Thule Adventurer cargo box on a 2001 Subaru Forester. Everything fit perfectly. The Inno mounts were completely compatible with the Thule crossbars. The fast and accurate shipping helped avert a crisis before a cross country trip.
Works great wouldnt have bought anything else and protects paint from getn scratched since i dont roof rails
My wife and I bought a 2019 Tyson with a bare roof and wanted a rack system that would be safe affordable and easy to install and not having to Buy and installed side rails. The Inno system was perfect. . It is solid material with a solid build. The directions were a bit confusing but after some time and with the etrailer how to videos it really made the difference. Ordering was simple and fast. Madison was great to work with she was knowledgeable and helpful. The delivery was fast and exactly on time. I was going to go with another company and another rack system…. I’m glad I didn’t. I saved money and got a great product from a great company. Thanks etrailer, Inno and thanks Madison! And mostly for making my wife happy bc know we can get to kayaking!!!
etrailer gave me fast shipping and a great price. Inno quality is great. I’ve had this on for several months and use it to transport bikes. I use the cheap bike racks on [online] but they work.
I purchased the Inno Rack system and Rhino Rack 581 saddles for my 2007 Mercury Montego. The instructions were easy to follow, and the rack is rock solid. It makes loading and unloading my kayak a breeze. I previously used roof pads and that was ridiculous compared to what this rack does for me now. I am amazed with how quiet with and without the kayak attached is - I don’t hear anything except the very slightest amount of wind with the windows open on the highway. I always have put a one turn twist in the bow and stern straps, but for the rest they’re all straight. I added an extra strap on the rear crossbar that goes behind the rear combing of my cockpit for extra security- but that’s just me. I’ve included a photo to show my setup. Thank you so much Mark S, Becky B, Carol C, and George J. etrailer rocks.
I have a 2022 Lexus GX460 Premium. Fairly simple installation and a almost seem less transition from the fit kit to the cross bar system. Can be done by one person, but I would suggest a two-person system to expedite the process.
2016 GOLF R MK7
Love it! Never installed one of these before. 30mins to put together. Another 30-45mins to install on the car. Once you get the concept for once of the bars, the second one goes by quick. It’s just understanding how it works/how it’s suppose to be installed at first.
Everything is good so far...the Inno rack system appears to made of good quality, fit and finish...it took about 2-hrs to get everything built, lined up, adjusted, tightened, loosened, repositioned, then retightened down...but I’m a bit of a perfectionist with things like this...plus I was checking my Saris cargo bin and various attachments, make sure that they’d all, which they do! And very well I might add...I just need to buy some new square carriage bolts for the channel now, along with new knobs...hoping that etrailer will get back to me with info soon...I will likely get a new wind deflector too...yesterday I did a test drive, was very pleased with the minimal whistling that occurred, and that was primarily between 30-40 mph and it was much quieter than my old Saris Roof Rack....after 40 mph the whistling got much quieter, very faint high highway speeds
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Timothy C.
12/18/2022
We bought the rack to put our Thule cargo box on for extra storage. We purchased a 2022 Airstream Basecamp 16X in June 2023 and the ability to put the racks on and add the Thule box for extra storage is a blessing, I can get the racks on in 20 mins by myself.