Blazer Off-Road LED Light Bar - 4,033 Lumens - Mixed Beam - Single Row - 25-11/16" Long

Video Transcript for Review of Blazer Off Road Lights - Light Bar - BL76VR

Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Blazer 25 and 11 16ths inches long Off-Road Mixed Beam LED Light Bar. Now, this LED light bar will deliver a nice, bright mixed beam of spot and flood lights, which is ideal for off-road driving. The flood beams, which would be the ones on each side, are six lenses over here. You might be able to see, those six lenses are different here.

And then, the six on this end, those would be your flood beams. So, they're great for seeing out in front of you and off to both sides. The spot beam, which is in the middle, the 12, those lenses are great for seeing it a distance. If you'd probably look closer, you might be able to see the difference in them. Now, what I am gonna do is I have this hooked up to some 12 volt power, just to show you how bright it is, and the different pattern it gives off.

So, what I'm gonna do now is zoom back out, and then I'm gonna go ahead and turn on the 12 volt power. Turn off our overhead lights. And there you can see the pattern that it gives off. It is a nice, high quality light output from a row of 24 three watt LEDs. The light output, the raw lumen output, is 4,800 lumens.

The effective lumen output is 4,033 lumens. Wattage is 72 watts. Power draw is 4.5 amps. Now, I just wanted to rotate this to show you how it looks on the side wall. And then, what I'm gonna do is put it on the very end here, and switch the camera angle, and you'll be able to see in the middle, how you got your spot beam.

And on both ends, you'll have the flood beam which goes off to both sides. So, what I'm gonna do is go ahead and switch this back here. And we'll switch it back to our other camera angle. And then we'll go ahead and turn off our power, turn back on our overhead lights. Now, the housing on this, it is a nice, rugged black powder coated aluminum housing, which is lightweight and rust proof, only weighs about 3.7 pounds. The fins on it, on the housing, they are channeled fins that let the heat quickly dissipate to optimize your LED performance. The lens over the LEDs is a tough polycarbonate lens, which is impact resistant. Does have an IP67 rating for protection against dust and moisture. And this is compatible with 12 volt DC and 24 volt DC systems. It is a very easy installation. You can see, I've installed the mounting brackets on each end. These mounting brackets and then the hardware to install the mounting brackets to your vehicle are all included. And what's nice is they are adjustable. So, you can see that you can angle it to where you need your light. Once you get it in a position you need, then you just tighten both brackets on each hand here. Now, it does even come with a quick connector. I did want to show you that I have it hooked up. We just disconnect the power. And you'll see, it's one of the ceiling quick connectors that'll keep any moisture out of your connection. You just wire it to your source, and then what you'll do, is it plugs right in, just like that. Makes a very secure connection. Makes it easy to remove if you need to remove your light bar anywhere. Now, the specs on this. The overall dimensions from one end to the other is 27 and five eight inches long. The overall height, two and five eight inches tall. And the depth of it is three and one eight inches deep. Now, that's overall dimensions. Just the light bar itself is gonna be about 25 and 11 16ths inches long. Height is only one in 11 16ths inches tall. And the depth will be the same, three and one eighths inches deep. But that should do it for the review on this Blazer 25 and 11 16ths inch long Off-Road Mixed Beam LED Light Bar.