To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
The curved ends on these affordably priced step bars give your Dodge Ram Pickup a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Features:
Specs:
The step pad areas in Westin's E-Series round nerf bars are indented instead of cut out, maintaining the structural integrity of the stainless steel tubing and preventing internal corrosion.
As shown in the image above, these step bars have a U-style tubing, which ensures that each bar conforms perfectly to your vehicle. Installation is quick and simple - just bolt the mounting brackets to existing holes in your truck's frame. No drilling is required.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Rate your transcript OrderClientKevin BrossRef #20647Order #TC0951369777 Today the 2007 Dodge Ram pick-up 2500 series mega cab. We're gonna install part number 23-2900. This is the Westin E-series Round Nerf Bars 3-inch with a polished stainless steel finish. All right, this sorta looks like on the past your side of the truck once fully installed. We'll go ahead and show you how it installs on the driver's side. The installation is exact same on both sides. All right, next I'm gonna go ahead and remove a first body bolt. Up by the front suspension right here.
Now, that bolt will get replaced by a new hardware. Now, this is the bracket for the front. It's stamped on the inside to help identify it. This is actually the same shape on both sides of the truck. Now, this is our new body bolt that comes with the kit.
It's a metric bolt. And you'll get a lock washer and a thick flat washer. This will go through here and then on between the bracket and the body mount will get this extra thick spatial washer. This will go right back up in there. We'll go ahead and it started.
Just running up the whole in shape and that's it. Now, on to this bracket here. We're gonna add this bar. Got a flat plate. Well inaudible 00:01:35 at the angle. And what's gonna happen, this is gonna mount up to this existing hole on the side of the bracket and then go out to this hole in the frame of the truck.
So, let's go ahead and install our hardware for this part. You'll get this bolt that's shaped like a key. This is a small plate welded on to it. You put it inside the frame. Rotate it so it doesn't fall out then we'll put our bracket on into place. First, a flat washer and then the bracket. Another small flat washer then a lock washer and knot. We'll swing this around to our bracket and install the hardware here. Okay. This bolt and a flat washer, together we ram from the inside to the outside. This will go over the bolt. Flat washer, again and the lock washer and knot. Okay. Again, just enough for everything holds its shape. In this case, we use both finger to tighten. Now, our next bracket in the center, be about in this location right here, is just past where the 2nd door starts. All right now, this is our handle that we'll install the side here. We'll use this open slot. A lot of vehicles will have a piece of material covering the hole. So you want to remove that and we'll go ahead and put our handle knot into place. We'll run it 00:03:11 through this access hole and then out this hole right here. It may hit the bin handle knot around just a little bit to make sure you can make it fit inside. Let's get a good grip with it with a couple pair of pliers and we'll just go ahead and just bend it. Just a little bit more. Okay. That's if you need to. Sometimes it works just fine the way it is. There you go. Got it. Now, to help pull it in place comes little clear plastic plate. We can just inaudible 00:03:51 started and just spin it on to place. That'll help hold it, of course. Now, we'll go on to our last task and point right by above the truck at the end of the cab. We'll go ahead remove the body bolt right here. Okay. Now, this is our bracket for the back. Now, you notice this is a lot taller than the one for the front. Okay. It's also marked driver's rear. Our hardware will be the same. New body bolt, lock washer, and a flat washer. Big spatial washer and back into the truck. All right, now we got our driver's side bar out. You could tell it's the driver's side bar because the step platform here is really close to the bend. That's the front on our driver's side. Okay. We'll go ahead and remove this in the packaging above the front 00:05:05. Just enough to expose the end where there are some threads in there. That's all we're gonna do for now. We'll go ahead and put it into place and since we're at the back, we'll go ahead and do that first. Don't forget a short metric bolt, the lock washer and a flat washer. Put through just like that and then to the threads as well 00:05:32 inside of the tube step. Just enough to hold it's shape. Okay. Let's go up to the front and do the same thing. We'll make sure the bracket in the center goes below the tube step. Now, front mounting bolt is gonna be identical. Flat washer, lock washer and a metric bolt. Again, just finger tight maybe at the most. Let's go ahead and work our attaching point at the center. Our attaching in a bar has a knot already installed into it. This will be a small metric bolt, flat washer, and a lock washer. We'll go ahead and peel a little of the packing around this area. This will inaudible 00:06:20 the bolt with it now. Next, we'll go ahead and adjust the bar, front to rear. I'd like to use this center braces as reference mark. So, I'll scoop 00:06:37 the bar for a little bit so this is pointing straight down. Maybe a few little love taps with the soft mount and bump it over. We got the position. The next one I'd like to do is go ahead and push this up for this shape of the brace matches the body work. Then we'll go and tighten it down. We'll go ahead and center up the tube on our bracket here. I'd like to squeeze it over to some bit so it's even in both sides. Then we'll go ahead and snug it down. Okay. Back's done, let's go to the front. Okay. All right, we got everything snug down. Now, we'll go ahead and take a few moments to tork 00:07:44 the bolts down as it does via the instructions. All right, let's go and take off the packaging and have our great reveal. Okay. That's what it takes to install a tube step part number 23-2900 the Westin E-series Round Nerf Bars 3-inch with a polished stainless steel finish on our 2007 Dodge Ram pick-up 2500 series mega cab. .
Average Customer Rating: 4.8 out of 5 stars (264 Customer Reviews)
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.Everything went smoothly from ordering to installation. I’ve been very happy with everything I’ve ordered from etrailer.
I have just finished the install of these bars on my 2002 2500HD. The installation went quickly and efficiently due to the quality of the product and in large part from the detailed installation videos provided by Trailer. The included instructions were next to useless, but referring to etrailer's video made the difference. I go out of my way to use Trailer for many needs, not just for the product, but for the support that this company offers.
My delivery was two days earlier than expected which was great. The nerf bars were very easy to install. It took me about an hour to remove the old ones and install the new ones. I am very satisfied with the product and the company. Thank you for a stress free project.
They came well packaged but one end was kinda opened but everything seemed to be there. The first one the driver side I tightened as I went. I had to go back and forth loosening and tightening. The passenger side I left loose and mounted the bars to the mounts tight. Then I came back and tightened the large bolts to the frame. This worked a lot better. I used a impact to loosen the frame bolts and an air Ratchet to tighten the bars to the brackets. The air tools speeds up the process I learned this working on aircraft.I bought the green in the photos in 1997 it is a 96 it had 5445 miles on it now it has 253000 miles it. I bought the Westin bars for it shortly after I bought the truck. They still look good when clean.
Very fast delivery. UPS did not handle the shipment with care as the package was not in good shape when received but the contents were not damaged. The boards were installed by a reccomend installer and add to the appearance of the vehicle.
I had the chrome nerf bars before. Apparently Westin stopped making them. The black ones look just as sharp. Very happy with etrailer, Westin and the bars. Thank you!
you guys are great.answered my question quickly.thanks for your help and I would recamend etrailer for your needs.
We ordered the Westin Nerf Bars on Wednesday, and they were here on Friday. The new Nerf Bars were packaged very well and no dents or dings in the sturdy package. My friend and I had them installed in 1 hour. Simple to install and fit perfect. I still have a pair on my 2005 Silverado Z71 and they are still in great shape. The Nerf Bars accent the 2023 Silverado Z71 perfectly with the chrome and black. Thanks foe a great product. Bruce in Texas
Bars look great on Silverado 2500. Highly recommend etrailer.com. They were very patient with returns when we ordered the wrong size. Very fast delivery. Great people.
Great service and everything went smoothly attaching the running boards to truck. You won't go wrong dealing with etrailer.
3" Nerf Bars look great on my new 4Runner but there is a slight bend when a 185lb person steps on them to get into the vehicle. Still a good product and the price was way below what I thought I would have to pay.
etrailer is Very awesome company. I was dealing with a wonderful person named Diana. I needed 46 in in length 3 inch diameter for my Chevy regular cab 2002 Silverado. I was totally amazed on how quick and fast and smooth everything went. Diana is a joy to talk with and work with. I highly recommend etrailer. Thank you Diana and Company!
Package arrived in a timely manner. It was packaged well and there was no damage to the nerf bars. They look good.
Had Westin step rails (nerf bars) on an old Ranger and got them for my new F150. This time I needed them to be able to get up into the rig (full-size pickups have gotten a lot bigger and taller in the past few years!). They installed easily, look good, and gave me the step I needed. I am as pleased with the latest step rails I got as I was with the old ones (which are now 21 years old and still functional … but not as pretty).
The Nerf bars were easy to install. Each side took me 10 minutes. The instructions were very good and easy to follow
The Nerf Bars are a perfect fit, and they look great on my truck. Korren C. was the greatest help. She is very knowledgeable about the products, and her follow-up is spectacular.
Looks clean easy to install but I wish they would cap the ends so water and road salt would not get inside of the tube and rust from the inside out
Exactly what I needed and ordered.
1/2 the price of in store purchase price.
Have had these for a year now and they work great. No problems with install or everyday use
I installed the 23-4010 nerf bars on my GMC Canyon Crew Cab SLT. Installation instructions from Westin were missing a few details that the etrailer installation video shows.
The nerf bars are polished stainless steel, but the are NOT protected by a clear coat. They will required polishing with a metal polish to keep them looking great. I rated them 4 stars due to no clear coat.
The first set delivered was shipped in just the Westin box & was damaged by UPS. etrailer promptly sent out a replacement set that was doubled boxed & arrived in good shape. Hopefully etrailer will double box in the future.
Just got new Nerf Bars Mounted and they were easy to do and look great on our Ford F250.
My son suggested I order from etrailer because he had dealt w/them before w/very good success. The running boards came yesterday afternoon. VERY well packaged w/banding & bubble wrap. They were in very good condition w/all necessary hardware to install. After unwrapping took him, my son, approx 45 min to install w/hand tools & an air impact on the ground in driveway. Instructions were "adequate" but a simple video I found online helped - We learn better by seeing. These boards are high quality, fast delivery & VERY good experience dealing w/etrailer.
Very well pleased with this product.No complaints.
2007 Chevy Trailblazer - Parts fit with ease. Each side took about 30 minutes in my home garage floor with home garage hand tools I.e. Craftsman tools. Steps seem a bit too forward on the running boards, however, after installed the step is actually in the perfect location.
Customer service as always Very Helpfull! Thanks Etrailer!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.