To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These 5" wide steps with rounded ends mount close to your vehicle for a streamlined look. Full-length plastic pads create non-skid surfaces. Constructed of rustproof aluminum with black stainless steel trim. Custom installation kit included.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2018 Toyota 4-Runner, you're going to be taking a look at and I'm going to show you how to install the Aries AeroTread Running Boards.This is what our running boards look like when they're installed. You're going to get two running boards. They're going to be 70 inches long and give you a five inch wide step. The inside frame is going to be made out of a rust-proof aluminum and the outside's going to be made out of a carbine black stainless steel so it's going to resist any rust or corrosion.The step pad itself is going to be made out of a durable hardened non-skid plastic. It's going to have a tread like pattern to give you adequate traction when getting in and out of the vehicle. We're going to have rounded edges to maintain that streamline look and have a 500 pound max weight capacity.First thing we want to do is, you want to get your ...
Back your vehicle, back or the front, either one, up off the ground just a little bit. It's going to make it a little bit easier to work under there. If you don't have ramps, it's not necessary but it will make it a little easier. If you don't have ramps, you want to pick some up, you can find some on our website.Once you get your vehicle up on the ramps, you want to make sure you set your emergency brake and then chock your front wheels. Next thing we're going to do, we're going to start on the passenger side.
You're going to have four brackets that look like this. You're going to have two brackets that look like this. The two brackets that are like this, are for the front of the vehicle on the driver and passenger side. The four brackets that look like this, are going to be for the center in the back on both sides of the vehicle. What we're going to do is we're going to go ahead and lay these where they're going to be installed.
Lay them like this underneath there. Then what you need to do is we're going to get underneath the vehicle. You want to check to see if you have factory hardware. If you don't have factory hardware on the vehicle, your kit's going to come with some hardware. That's what you're going to use.If your vehicle has factory hardware, you're just going to remove the hardware, put your bracket in place, and reinstall that hardware.
This is the hardware I was talking about. Again, you're going to have two here in the back, two in the center, and two in the front. We'll take a 12 millimeter socket, we'll go ahead and remove those. We'll take our bracket and with two small holes, the enclosed holes here, and we're going to go up underneath with our bracket like that.Now we can reinstall our hardware. We're not going to fully tighten this down right now. Now we're going to install our center one, the same way. We'll take inaudible 00:02:42 front bracket and you want to slide them underneath those brackets there. We've already removed the hardware. Reinsert your hardware if you have existing hardware there. If not, this is where you would put in the hardware that comes with your kit.Now we want to take our running board. You're going to flip it over upside down. You're going to have six bolts with nuts, washers and block washers on it. We're going to remove the nuts, block washers, and flat washers. We're going to have two, three pins 00:03:27. Two for the center. What we want is we want this rubber section up against the vehicle. There we're going to set it into place like this. What we're going to do is get back under there, inaudible 00:03:46 our hardware and get it set into our brackets. What we'll do is we'll take it and we'll push it like that. Then we'll put our hardware back on. Now we can reinstall our hardware, flat washer first and then the block washer, and then the nut.You can see there's plenty of room here on these bolts so you may not need to take these all the way off. The instructions tell you to take them all the way off but you can see we have plenty of room. If you can get them on without having to take off the nut, block washer, flat washer, by all means, try it that way. You're just going to repeat this for the other two brackets. Before we tighten anything up, what we're going to do is we want to center our ends between our wheel wells, or center the board between our wheel wells. You take a guesstimate here, distance from this edge to the edge of our wheel well there. We'll do it again back here. Once you have it adjusted where you want, it'll go back in. Then we're going to tighten up the hardware and we're going to start with the hardware that's holding the bracket to the vehicle. Now I'm going to push these all the way back in. We'll go ahead and tighten up this hardware that's holding our running board down to our brackets.Then we'll repeat that for all remaining brackets and inaudible 00:05:32. Once you're done on this side, you're going to repeat the same process on the driver's side. That'll do it for a look at and installation on the Aries AeroTread Running Boards in black on our 2018 Toyota 4-Runner.
Average Customer Rating: 4.7 out of 5 stars (114 Customer Reviews)
These 5" wide steps with rounded ends mount close to your vehicle for a streamlined look. Full-length plastic pads create non-skid surfaces. Constructed of rustproof aluminum with black stainless steel trim. Custom installation kit included.Wow, great running boards, very sturdy and well made. Follow the video instructions on the etrailer webpage and save a lot of time with installation. I watched the video and had both sides done in less than an hour. All the hardware was included in the package and it was extremely easy to install. These are great running boards that will greatly improve the look and functionality of your vehicle.
There is a little confusion over these boards. After a lot of research, I have found these boards/hardware Part# PT93889200 should be marketed to fit 2010-2022 LIMITED, TRD SPORT, and Night Shade ONLY. I own a 2021 SR5 Premium 4Runner, & a 2022 TRD SPORT. Neighbor has a 2021 Limited. The Aris Aero boards are better quality and look/fit better than my OEM Factory SR5 Premium boards.
Awesome. It was east to install the running board to my 2020 4runner limited Toyota. Highly recommended this product from the store etrailer. Using only 1/2 inch rachet to install. My 4runner now is more looking good. Save money for installation. DYI.
We love the running boards. We put them on the day we got them and have enjoyed every bit. I have the new Toyota 4Runner with the night shade edition so everything is blacked out and the boards just flow with that. I’m pregnant and know that these will be a big help in the later part and with kids
I ordered from etrailer because they had all the parts in a package. Easy. I got the 5 in boards (70" for 4Runner) They were just right. Not to big. Install was as easy as the video. One thing. Installing the running boards, watch which way you want the arrows on the board to face. Installed with the arrows pointing to the back. So had to take them off and put them on the other side. No big deal, just didn't look right facing back. Really happy with them. No pictures...electronically challenged on that point.
etrailer has got it down. My running boards were delivered on time and they look awesome on my 4 Runner(2019). The video was spot on and install extremely easy.
When I ordered these running boards the brackets they came with made them hang down too low. Alyssa worked with me to get brackets were a better fit. I appreciate the willingess and effort to make these fit correctly on my 4 Runner. I would definitely order again from here.
Had them installed on our 4Runner for about a year. So far they are sturdy and look good. No issues.
These steps are awesome, the quality and construction are solid and install in about 30-45 minutes with tools prepared, very impressed by the low profile looks and overall structural integrity. I would highly recommend!
The installation was very easy thanks to the instructions that came with the order. It took about 30 minutes per side. They look fantastic and my wife is very happy with them. I wish other companies would follow your lead. Thank you very much.
One year ago I purchased these running boards to be installed on my 2022 KIA Sportage. I was having trouble getting in and out of my SUV when my sciatica nerve was acting up. These running boards not only put more style on my vehicle, they are a blessing that I can get in and out of my vehicle when I am unable to twist and turn. If I didn't purchase these step boards, I would have had to trade my SUV in for a car that I would have been able to get in and out of. I definitely recommend these running boards for several reasons and as I use them everyday after 1 year, they still look as new as they did a year ago when I had them installed.
Boards look great, and the installation was fairly easy. 1st side took me about an hour and second side was on in 30 minutes.
Followed etrailer video to install. Installation was easy. I did it on a cold day so it took longer than expected but overall, satisfied with the product.
Very high quality product and installation was a snap. etrailer delivers once again. Delivery was earlier then stated.
The running boards bolted right up to the vehicle with no problem. They seem to be sturdy and are tucked in as to not protrude past the body.
My wife is short and likes the assistance they give her entering the Pilot.
I enjoy the prompt delivery and service from etrailer.
Thank You for my wife's birthday present for her 2020 Honda Pilot!
I have instructions that are to follow, but these are terrible. You must think that the average person will know how to use the pull through nut. Your instructions tell you where to it and that is all. And what does it mean to put M 10 bolt plate in the rear mounting hole. Please show these instruction to someone who has never put these running boards on and ask what he thinks It would be easier to drill holes
Shipping was fast. Installation was fairly simple and didn’t take much time. They look great on my Durango! Just what this vertically challenged girl needed!!! Thank you!!,
Boards look great and appear very sturdy. I installed with no elevation of vehicle in 2 hours 5 minutes which included removing the passenger board for the correct one. It wasn't yet tightened so not too hard. Instructions are ok and provide basic info but I learned more in the comment section here. The brackets are not labeled correctly and face one way on the passenger side and the opposite on the driver side. Don't worry, it all works. The instructions did clarify that forked brackets go to the front and that all others worked middle and rear regardless of stamped markings. Very little room to work under car but I managed. Boards look durable and are very good looking. Mount is sturdy but it would help if boards were marked for Passenger/ driver. I saw the tread pointing toward the front in a picture and so I removed first board and swapped. Screws don't move as freely in the tracks but sufficiently so. All in all, I would buy them again and do it again. Not sure if they are lined up right but an easy fix if they need to move a little forward or back; for now they are centered.
It really helps my wife get into the vehicle. I use it too but not as much since I have longer legs.
Running boards have a very good appearance they improved the looks of my 2020 Traverse the middle and rear mounting brackets take a little time they are tricky to mount however I was successful in getting them mounted. We love the product
Better than expected, Perfect fit, I wanted something that didn't stick out too far and I think 5 inch is the perfect size, Good packaging, box had a couple of holes from shipping but no damage to product. Only thing as mentioned in other reviews front and rear brackets labeling is reversed but easy to figure out.
I like the way they look however, the corner on of the running board came in damaged. I did not even wanted to open the other running board.
These running boards are very good quality and fairly easy to install. Make my Traverse look much more nice. Oh, and perfect for assisting in entering the vehicle. Well worth the price.
Again, etrailer.com knocks it out of the park! Other than one pain in the butt issue, this was perfect. The running boards are much higher quality than I thought they would be, solidly built and look awesome on my 2019 Honda Pilot.
Installation was easy - after I watched the installation video. However, the brackets marked "F", which I assumed meant "Front" like over reviewers, was actually the rear and the brackets marked "R" were actually the front. Brackets marked "M" were for the middle. Fortunately, I figured this was the case after reading other reviews. But, with my vehicle, it was really obvious when I looked at the mounting holes. The entire installation took about 40 minutes (plus an hour and a half to go to Home Depot, but I'll get to that).
The running boards look awesome on my vehicle! They look factory installed. I like that they have a thick rubber strip that seals them again the vehicle, preventing rain, snow, ice from getting in between the running boards and the side of the vehicle.
This is the first time I've ever had something go wrong with a product I ordered from etrailer, though. One of the mounting bolts was defective -- see the picture I posted. This is absolutely not etrailer's fault and is on the manufacturer, but it was a major hassle for me as I didn't notice until I had the driver's side running board installed and had one of the brackets already installed on the passenger side. It is a fairly standard sized metric bolt and I spent $0.92 at Home Depot for a replacement -- but, it was still a major hassle. If it weren't for that, I'd rate this 5 stars.
Suggestions -- use a round wire brush to clean out the weld nuts before attaching the brackets. A couple of mine were full of dirt, which I expected and I cleaned them out first. Second, check the bolts!! My defective bolt was probably a fluke, but checking all the parts would be a good idea anyway.
Shipping was very quick, extremely well packaged as usual. Love etrailer!!
Do you have a question about this Nerf Bars - Running Board?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David C.
7/27/2020
Still great, no issues. Still look good. Quality item.