Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs
(137 reviews)
Price: $1,399.90
In Stock
Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs
Item # TH43002XT-606
Our Price: $1,399.90
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (137)
- Q & A (0)
- Photos
Thule Ladder Racks - TH43002XT-606
- Truck Bed
- Sliding Rack
- Thule
- No-Drill Application
- Over the Bed
- Work and Recreation
- Aluminum
- Fixed Height
TracRac provides the ultimate in versatility with this sliding ladder rack. Rack adjusts along the length of your truck bed and easily removes from the T-track base rails. Durable aluminum is lightweight and rustproof. Multiple tie-downs included.
Features:
- Adjustable ladder rack slides in unique, T-track base rails along the full length of your vehicle's bed
- Perfect for long loads, short loads, and everything in between
- Integrated, quick-release clamping knobs can be loosened to move rack, tightened to secure it in place
- Rack can be removed from track quickly and easily
- Aerodynamic design reduces drag and wind noise
- Elliptical crossbars are streamlined to minimize wind resistance
- Airfoil trip strips prevent air from whistling through slots
- 6000-Series aluminum construction is strong and durable
- Lightweight material won't detract from load rating
- Internal web structure of crossbars increases strength and rigidity
- Dual-stage powder coat finish adds extra rust protection
- E-coat is followed by a clear coat for improved resistance to scratches
- 4 Heavy-duty, aluminum load stops included - keep ladders, lumber, and other cargo in place
- Mount quickly and easily in top slots of crossbars
- Slide within slots to adjust
- Lock in place with simple twist of a knob
- 4 Side cleats attach to uprights for additional tie-down options
- No-drill installation - mounts in stake pockets
- Wide base on either side of each upright provides superior stability - no need for additional bracing
- Made in the USA
Specs:
- Carrying capacity: 1,250 lbs
- Crossbar length: 69-1/2"
- Rack height (with base rails): 27-5/16"
- Limited lifetime warranty
TracRac Base Rails
The TracRac base rails provide the foundation for this unique, customizable system. No-drill, stake-pocket installation yields securely mounted rails that sit atop your factory side rails. Each rail has 2 tracks for maximum adjustability.
Because the rack section at the front of your truck bed mounts to a different T-track than the one in the rear, the sections can be moved so that they are right next to each other. The result is unobstructed access to your truck bed and improved aerodynamics when you are not using the rack.
TracRac offers accessories that are designed to mount in these tracks. Base rail tie-downs (sold separately) give you additional cargo-management options. These rustproof, aluminum tie-downs slide across the rails for optimal placement and are secured in place with the turn of a knob.
TracRac Slotted Crossbars
The sturdy aluminum crossbars on all TracRac truck racks feature integrated slots for mounting and easily adjusting accessories, such as the included load stops. These slots appear on both the top and bottom of the bars for the ultimate in mounting versatility. Like the pieces that mount in the base rails, these accessories also have quick-release knobs that let you loosen and tighten them with a mere twist of a knob so that they can be positioned as needed along the bars.
A built-in trip strip at the front of each crossbar shields the slots from wind, maintaining the aerodynamic quality of the bars and preventing that annoying whistle you often find with slotted bars.
Included Tie-Downs
Included with your TracRac SR are 8 tie-down accessories. The 4 load stops are designed to mount in the slots of the crossbars and slide along them for quick, easy adjustment. These bookend-style pieces help to hold ladders and lumber in place on the crossbars. They also have built-in loops for securing tie-down straps.
The 4 cleats attach at any of the provided mounting points along the outsides of the upright supports so that you can tie down items that require additional anchoring or that sit in your truck bed.
Sturdy, Rustproof Construction
The TracRac base rails and rack system, as well as most TracRac accessories, are constructed of durable, lightweight aluminum. Because aluminum is lighter than steel - the material most often used for truck racks - only a small percentage of your truck's cargo capacity is taken up by the rack itself, enabling you to pack on more weight than you could with a steel system.
Even though aluminum is already rustproof in itself, TracRac has taken the extra step of adding a dual powder coat finish to further protect your rack. The electrostatic powder coat (e-coat) clings to the metal surface better than traditional paint finishes for a more durable covering. The second coat is a clear finish that adds extra shine and protection from scuffs and scratches.
43002 Thule Track Rack SR Sliding, Truck Bed Rack
21606 Thule Track Rack Base Rails - Nissan Titan Crew Cab Trucks
Replaces TracRac TA21606-02
Installation Details
Alternate Instructions
This Product Fits The Following Vehicles
- 2004 - 2024 Nissan Titan 5-1/2 Foot Bed - with Utili-Track System
- 2004 - 2024 Nissan Titan 5-1/2 Foot Bed - without Utili-Track System
Customer Reviews
Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs - TH43002XT-606
Average Customer Rating: 4.6 out of 5 stars (137 Customer Reviews)
TracRac provides the ultimate in versatility with this sliding ladder rack. Rack adjusts along the length of your truck bed and easily removes from the T-track base rails. Durable aluminum is lightweight and rustproof. Multiple tie-downs included.by: Sammy06/13/2018
2012 Nissan Titan
Well built product. Easy install. Combined it with a Bakflip F1 Tonneau cover. Minus a few minor things they work well together.
by: John08/22/2022
Great rack system for my 21 TitanPro. Just works, and looks sexy. Easy to DYI Install. etrailer is all over it if you have a problem. Great company!
John
by: Jim04/18/2024
We've been really happy with the Thule Sliding TracRac, and have made some unusual modifications. We wanted to mount it outside/around a camper shell, so we needed to mount the rails outboard of the truck bed (aluminum "shelves") and figure out how to make the crossbars longer (bought a third crossbar and connected extension sections by making three-holed t-slots nuts and using round aluminum tubes). None of this sanctioned by etrailer or Thule, of course. See photos, which also show an adaptor I made to mount a Thule square bar above the TracRac crossbar to use existing Thule accessories.
by: Tim12/15/2023
Past 20 years I've used Rack-It truck racks. They're solid steel, eventually rust and took two grown men (and an extra set of nuts) to remove them from the truck. Great racks. Just way more than what I need the older I get.
However I wanted something that could easily be removed (by myself), if needed, and was aluminum. I bought these, as well as the extension cantilever, and it serves my needs as a general contractor. It supports my 24' walk plank just fine. The only thing I have to be creative to transport is full length rebar. If I transported rebar all the time, this rack would not be my first choice.
At the time of my purchase, there was not a specific rack for my GMC AT4. So I simply measured the bed of the truck, bought one with a similar measurement, and modified the drilling holes to work.
Lastly, I didn't want a silver color rack on my black truck. While you could get the racks in black. You could not purchase a black cantilever. So I simply had all the pieces powder coated black.
Honestly, I get a lot of compliments on it. Because no one else has one like it.
I'm very happy with it. It's perfect for the occasional ladder, walk plank, or 16' piece of lumber. I've had it mounted for over a year now, with zero problems! I remove it weekly to go through the car wash, and throw it back on in 5 min or less when i get home.
by: Jeff10/04/2023
DO NOT TRUST THE ADVICE GIVEN BY THE SO-CALLED EXPERTS AT ETRAILER. This rack WILL NOT fit the Carbon Pro Bed...I was told by 2 different "experts" that this rack would fit my 2023 Sierra w/the Carbon Pro Bed, since this rack mounted to the stakebed pockets and not to the underside of the bedrail. After receiving my order, I prepared to install the rails and cutout the front stakebed pocket covers which is required to do the install (also indicated by Kevin C. from ETrailer). As soon as I got to step 3 of the rail install instructions, I knew there was a problem. The instructions indicated there was a hole on the inside of the bed to secure the rear stakebed pocket adapter to. There is no hole or any other type of access to any of the stakebed pockets on the Carbon Pro Bed. So, now I have altered bedrails and have a rack that does not fit. It is completely irresponsible of the "experts" at Etrailer to provide information or direction that is not true or hasn't been confirmed.
by: Thomas03/14/2024
Great product, light weight , well built.
Customer service is very responsive.
have a Ford lighting so wanted a light truck rack.
easily removal to save on range/ milage.Made in the USA.
by: BurningDaylight03/17/2023
Just installed this last night sobs true rating is hard to do. With that said it is definitely good quality very tight with no wobble! Hope it works like I want with removal for trips and going through the car wash. Keeps the truck looking pretty sharp compared to the traditional ladder racks!!
by: Harry W04/13/2022
etrailer.com is an outstanding company. I purchased a Thule system in January. Due to logistics (my fault) I tried to install the system in April. Three of the attachment arms were incorrect. I contacted Ashley of etrailer, the sales representative who sold me the system, who patiently listened and after receiving the needed photos and explanation, etrailer sent me a replacement system. The new system was installed and the truck is ready to go. Ashley's professionalism, communication skills, product knowledge were excellent. Ashley and etrailers' commitment to solving my issue expeditiously puts etrailer in a class by itself.
by: Teofilo09/16/2023
I received packages with Thule trac rac SR sliding truck bed ladder rack,Iam totally disappointed, parts arrived incomplete,mising:
04 rubber shim
04 rubber block for base rail
04 metal pocket nut
also
04 crossbar tie down
I really want you fix this problem by replacing the missing parts or else I will return everything
by: Eric K09/30/2020
Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.
by: Christian11/24/2021
I did install the Thule TracRac SR. I did it on my own and it went well.
I'm really pleased with it.
As for the photo, I will send you one, once I've washed my truck.
Can't make a photo with a dirty truck.
I will leave feedback later after some time with the rack.
by: Manny08/27/2022
I searched many ladder racks I was unsatisfied till I found this one. It’s beautiful it’s light and it’s versatile. I have a X-short bed Toyota Tundra platinum with a top. With this ladder rack I was able to keep my topper.
by: Chris07/20/2015
Couldn't be happier with the Rack, it went together and operates flawlessly. Dealing with e trailer was a snap, I was informed all the way through the buying process of shipping and arrival dates. Will absolutely buy shop again with e trailer.
by: Robert B.09/20/2019
Very happy with the rack on my 2018 Silverado. I also have the Back flip hard top bed cover. I am able to open all but the very last position. I might still be able to adjust the rails and to get there but it hasn't been an issue. Used it to haul lumber and I made a bicycle rack that works with the racks and the bed cover down. Works great. Was not hard to install.
by: Adam 12/08/2023
Fit perfectly. Was a little concerned that it wouldn't work with my bed cover. But it does and couldn't be happier.
by: Darryl C07/14/2023
This is the second trac-rac I have owned and have had one for the past 18 years.
The flexibility it allows is is fantastic. Would not own any other ladder rack
by: Jeff N07/10/2017
This is a great product and works really well with the Bak RevolverX2 Tonneau cover.
The only reason I didn't give it a 5 was because the base track has about a 3/4" overhang at the rear of the bed rails. Unfortunately the bed rails of the 2016 Tundra Double Cab are not square. As you can see from my photos, the front fits flush while the rear hangs over. Besides that, they are very sturdy and installation was simple.
Knowing what I know now, I would still buy this product again.
by: Jeremy 05/27/2023
Really nice rack. Exceptional customer service from Sherry S. Was looking for something to rack out my truck but not lose bed cover. The sliding rack is awesome. Can move it forward if bed room needed. Came back and ordered some additional accessories (self retracting ratchets, pads for crossbars, storage bag, tie down loops. Quality is top notch. Seems pricey, but when compared to other racks isn’t really all that bad when you are getting grade A product that has versatility. Also keeps the truck looking pretty nice. If I could give 10 stars I’d do it. Just buy it… and buy it from etrailer. Delivered on time, as advertised.
by: Mark WHI09/23/2019
Great product! Packaging could be better for the larger pieces (rub marks). My 2018 Ram 1500 quad cab came with some small challenges that I had to solve myself. No videos or written words available. Basically if your bed rails are covered with a bed liner you need to remove the plastic sleeve in the rear stake pockets. Otherwise you won’t get an equal spacing from one rail to the other. You will also need to use the provided rubber tape with the wedges in order to make the rails level. Otherwise it went together great.
by: Michael 03/29/2024
Works well
by: Scot 11/08/2023
Phillip is a very customer orientated professional who has made my experience a true pleasure. He is very knowledgeable about your products. And knows the difference between models for different trucks and vehicles sizes, including. It would be very beneficial for you to keep an employee like that is well worth having as a sales person.
by: Thomas06/08/2020
It was a tight fit with my existing GatorTrax Tonneau Cover but doable. The Bull Ring Pocket Router made cutting of the stake pockets a breeze.
by: Travis05/25/2022
These racks are simple to install and perform as expected. Pros are that they can slide all the way to the cab to get out of the way while not in use. Or can be totally removed if you need to park in a low clearance garage or want to go through the car wash. Cons are they can and will break if you back up against a tree limb or basketball hoop but that’s not really the racks fault now is it. The silver paint will inevitably start to chip off once the cast aluminum starts to oxidize after a few years. Kind of a bummer since otherwise they look nice.
by: Joshua 11/17/2021
The Good:
This rack is sturdy and doesn't make a lot of noise. I also like that it's aluminum and I don't have to worry about rust making it look bad or compromising the structural integrity.
The Bad:
It doesn't slide very well. It takes two people and even then it is VERY sticky. It makes sense...aluminum doesn't like to slide well. But I think there is room for improvement for some sort of low friction glides in the rack that last long term. Also, where the ladders sit, the aluminum is getting chewed up a bit.
The Ugly:
Well...It's not ugly. It actually looks nice. :)
Overall:
We also added the cantilever after the fact and that really helps to stabilize longer ladders. While the rack does have a lot of options for tie-downs, they mostly seem to be geared toward ropes or super light duty ratchet straps. We use slightly heavier duty ratchets straps for everything we need them for (1 1/2") and it would be nice to have a better way to hook those up. Not a big deal, just something to improve on.
All in all, this rack is expensive. Understandably so because it's aluminum, but that was a hard pill to swallow. The fact the rack is difficult to slide makes it even harder to swallow...I'm just glad we don't need to slide it that often.
by: Steven 08/19/2023
Very high quality product with excellent customer service. Highly recommend Thule and etrailer!
25
171
Show More Reviews
See what our Experts say about this Thule Ladder Racks
- What Tonneau Cover will Work with My Rola Haul-Your-Might # 59799 on My 2018 Nissan Titan?I have a solution for you. Unfortunately, since the Rola Haul-Your-Might T3 # 59799 clamps onto the bed rails of your 2018 Nissan Titan's 5-1/2 foot bed with the utili-tracks system, you will not be able to use it with a tonneau cover. However, the only ladder rack that we carry that will be able to work with a tonneau cover is the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-606 or the Thule TracRac SR Sliding Truck Bed Ladder Rack with Centilever # TH43002XT-606EX. The...
view full answer... - Tonneau Cover/Ladder Rack Combination for a 2006 Nissan TitanCrew Cab 5-1/2 foot Bed w/Utili-TrackThe only tonneau cover/ladder rack combination that we have available for your 2006 Nissan Titan (which is the same situation for most pickups) Crew Cab 5-1/2 foot Bed w/Utili-Track system is the BAK Revolver X2 # BAK39505 and the TracRac SR # TH43002XT-606. Since just about every ladder rack installs in the stake pockets or by clamping on the side rails of your truck on the inside there are very few options available. The best part about this is that these are 2 of the best products that...
view full answer... - How to Carry Kayak and SUP on 2018 Nissan Titan Platinum Reserve with BAKFlip MX4 Tonneau CoverThere is one option to add a ladder rack to your 2018 Nissan Titan Platinum Reserve with the BAKFlip MX4 Hard Tonneau Cover # BAK48525, which is the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-606 (this is assuming you have a 5-1/2 foot bed on your Titan). The only thing to be aware of is that you are going to have to slide the rack in order to fold and unfold your cover, and the rack's base rails may sit slightly on top or rub the inside rails of the BAKFlip. Then to carry...
view full answer... - Thule TracRac Sliding Ladder Rack for a 2009 Dodge Ram with 8 Foot BedFor a 2009 Dodge Ram with an 8 foot bed you would actually need Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-000. This comes with the 21000 series base rails which are designed for 8 foot beds. Ladder rack # TH43002XT-606 is designed specifically for certain Nissan Titan trucks.
view full answer... - Tonneau Cover for 2018 Nissan Titan 5-1/2 foot Bed with Utili Track and Titan Box plus Ladder RackWe do have one tonneau cover that matches everything you are wanting. The BAK Revolver part # BAK79525 is the correct fit for your 2018 Nissan Titan with the utili track and Titan boxes and can be used with the Thule TracRac sliding ladder rack # TH43002XT-606. The Revolver is the only cover we offer that sits far enough to the insides of the bed rails to allow the TracRac to fit and still roll up. It's also a really great and secure cover so you'll like it overall as well. It's a roll...
view full answer... - Ladder Rack that Can Fit 2018 Nissan Titan with Roll Up Tonneau CoverWe have the Thule TracRac SR ladder racks can fit with roll up tonneau covers that install between bed rails so for your 2018 Nissan Titan you could use the part # TH43002XT-606 since it install by attaching through the top of bed rails where as most install by wrapping around the bed rails.
view full answer... - Is the Thule TracRac SR Sliding Rack Compatible With the BAK MX4 Hard Tonneau on 2017 Nissan Titan?The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-606 is the correct fit for your 2017 Nissan Titan and can work with the BAKFlip MX4 Hard Tonneau Cover # BAK48525 if you have the 5-1/2 foot bed. The only thing to be aware of is you will need to slide the rails to allow the cover to open and close because the rails of the ladder rack angle in for support. Sliding forward and back will allow complete access and compatibility with this tonneau. If you have a different bed...
view full answer... - Will The Thule TracRac SR Mount Into A Nissan Utilit-Track Mounting System Hey Robert, The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-606 mounts to the stake pockets in the bedrails. If your Titan doesn't have stake pockets then it will just require some drilling in order to install.
view full answer... - Truck Bed Ladder Rack Compatible w/ Utility Rails in Bed of 2012 Nissan Titan w/ 5-1/2 Foot BedWe do indeed have some ladder rack options available for your 2012 Nissan Titan with the utility track rails in the bed. The Rola Haul-Your-Might rack, part # 59799 has an 800 lb capacity, and would mount directly to the utility rails. If you scroll to the bottom of the product page for the # 59799, you can see the various load stops that are available. TracRac also offers a ladder rack, part # TH43002XT-606 that has a 1250 lb capacity. This rack attaches to the vehicle via the truck...
view full answer... - Ladder Rack and Tonneau Cover Compatibility on 2013 Nissan TitanLadder racks and tonneau covers do not always play well together since often they will use similar mounting points in the bed. The TracRac universal ladder rack # TH91000 fits all bed lengths of the 2013 Titan with or without the Utili-Track System. However the only combination of ladder rack and tonneau cover confirmed to work together properly on the 5-1/2-foot beds is the TracRac SR Sliding racks, parts # TH43002XT-606 and # TH43002XT-606EX, along with the BAK Revolver cover # BAK39505....
view full answer... - Ladder Rack For 2006 Nissan Titan Crew Cab With 5-1/2 Ft Bed And Utili-Track SystemThe TracRac SR Sliding Truck Bed Ladder Rack, part # TH43002XT-606 is a confirmed fit for your 2006 Titan. This installs in the stake pockets of the truck bed and would work great for you. This rack has a 1,250-lb weight capacity and can slide along the length of your truck bed for different length loads you need to carry. I called my contact at Adarac and asked about installation of a ladder rack on your 2006 Nissan Titan. They told me they only make ladder racks designed to fit Ford,...
view full answer... - Hardware for Replacement End Cap and Cleats for TracRac Ladder RacksWe have socket head cap screw # TH919063054 that is the right size for the Replacement End Cap for TracRac Ladder Racks # TA01-27023. Another Expert found that in order to install the Replacement Tie-Down Cleat # TA01-27046 you are going to need 1/4"-20 x 1-3/4" socket head cap screws. We do not carry this screw separately so you would need to source it from your local hardware store.
view full answer... - Is There a Ladder Rack for a 2014 Nissan Titan Crew Cab That Works With Tonneau CoverThe only ladder rack option we offer for a 2014 Nissan Titan that can be used with a tonneau cover assuming the cover mounts inside the bed rails and does not cover the stake pockets is the Thule TracRac SR Sliding Truck Bed Ladder Rack. The correct one for a Crew Cab is part # TH43002XT-606. There are no Adarac options for this vehicle.
view full answer... - Thule Rack Option That Fits Over TruXedo Tonneau Cover on a 2018 Nissan Titan with 5-1/2' BedThe closest thing that we have to what you are looking for is the Thule TracRac SR # TH43002XT-606. This is compatible with the 5-1/2' bed on your 2018 Nissan Titan and it mounts on top of the bed rails so it should be compatible with your TruXedo Sentry # TX1597301 or TruXedo Sentry CT # TX1597316 as they mount inside the bed rails. This hasn't been tested and confirmed to fit though so there is no absolute guarantee it will work, plus this system uses slightly different bars than the...
view full answer... - Adding a Third Upright and Crossbar to Thule TracRac SR Ladder Rack on a 2012 Nissan TitanThe UtilityRac ladder racks such as # TH42101XT do not fit the same base rails as the TracRac SR sliding racks. To add a third bar to your ladder rack # TH43002XT-606 you will need the individual pieces. 1 of Left Mounting Foot # TA01-42003 1 of Right Mounting Foot # TA01-42004 2 of Locking Knobs # TAKB-90030-1 4 of Nylon Inserts # TAFX-42008 2 of Upright Posts # TA7521902002 2 of Tie Down Cleats # TA01-27046 1 of Crossbar # TAFX-30007-02 2 of Corner Braces # TA8527813001 2 of End Caps...
view full answer... - Ladder Rack and Tonneau Cover for 2005 Nissan TitanI may have a solution for you, however because of how the Thule TracRac Universal Ladder Rack # TH91000 attaches over the bed rails of your Nissan Titan, there is not a tonneau cover available that can be installed at the same time. For a tonneau cover to be added to your Titan the TracRac Universal Ladder Rack will need to be removed. For a ladder rack and tonneau cover combination that will work well on your truck I recommend taking a look at the Pace Edwards JackRabbit Hard Tonneau...
view full answer... - Solution for Mounting Thule Hulavator on 2004 Nissan Titan Ladder RackThe Hullavator 897XT mounting options are extremely limited so unfortunately there is no way to adapt them to a ladder rack on your 2004 Nissan Titan. I know it is not ideal, but the only real solution is to sell your current Hullavators and replace them with the # TH898. The Hullavator Pro will be able to mount on a ladder rack like the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-606 which fits the 2004 Nissan Titan with the 5-1/2' bed and Utili-Track system. There is...
view full answer... - Sliding Ladder Rack and Tonneau Cover that Fits 2020 Nissan Titan with 5-1/2 ft BedFor your 2020 Nissan Titan 5-1/2 foot bed with utili track we have solutions for both a ladder rack and a tonneau cover but no with the Yakima Overhaul HD. If you liked the BAK cover # BAK39525 you'd need to go with the TracRac Sliding Ladder Rack part # TH43002XT-606 which is perfectly compatible. This will give you a sliding ladder rack and a roll up tonneau that would fit between the bed rails.
view full answer... - Ladder Rack for 2005 Nissan Titan 5-1/2 Foot Bed With BAKFlip MX4 Tonneau CoverThere is a ladder rack that is compatible with your 2005 Nissan Titan with a 5-1/2 foot bed and the BAKFlip MX4 Hard Tonneau Cover # BAK48505. The rack you will need is the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-606. The TracRac installs on the top of the bed rails, which is why it is compatible, and in regards to height, the rack will be 27-5/16" above your Titan's bed rails, so you can use that measurement to see if it is as tall as the roof or your truck. I have...
view full answer... - Ladder Rack Compatible with BAK MX4 Tonneau on 2018 Nissan TitanThe Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-780 is only a fit for certain Chevy trucks with 8 foot bed. For your combination if you have the 5-1/2 foot bed, the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-606 is what you need. It will require sliding the rack to fold the tonneau because the uprights angle in. Moving the ladder rack forward and back will allow that combination to work. If you have a different bed size there...
view full answer... - Recommended Tonneau Cover and Ladder Rack for a 2021 Nissan TitanI have a solution for you. First, though, the Rola Haul-Your-Might T3, part # 59799, is not compatible with the Truxedo TruXport, part # TX297401. The reason is that the TruXport installs on the top of the bed rails and the T3 won't be able to secure of the rails. In fact, due to how the TruXport mounts, it won't be compatible with any ladder rack. Instead, I have a recommendation for both a tonneau cover and ladder rack. For the cover, I recommend the BAK Revolver X2, part # BAK39525....
view full answer... - Ladder Rack and Kayak Carrier that Fits 2017 Nissan Titan with Utili TrackThere's only one combination of ladder rack and tonneau cover we can guarantee will work together on a truck and that's a Thule TracRac SR ladder rack like the part # TH43002XT-606 which fits your 2017 Nissan Titan if it has a 5-1/2 foot bed and the BAK Revolver X4s part # BAK68ZR. The reason these two fit together is that the ladder rack installs through the top of the stake pockets and does not wrap around the inside of the bed rails and the Revolver installs between the two bed rails....
view full answer... - Recommended Tonneau Cover and Ladder Rack Compatible With 2021 Nissan Titan W/ Utili-TrackBrett, the BAK Revolver X2 Hard Tonneau Cover # BAK39525 you're looking at doesn't look like it will work with your 2021 Nissan Titan with the Utili-Track. It looks like only stake pocket accessories are going to work with your truck since the ladder rack you have interferes with the utili-track which is how # BAK39525 installs.
view full answer... - Tonneau Cover and Ladder Rack for 2017 Nissan Titan 5.5 ft with Utili TrackI can help you get setup with a cover for your 2017 Nissan Titan with 5.5 ft bed and utili track with the BAK Revolver # BAK68ZR and a ladder rack like the TracRac SR # TH43002XT-606 but we don't have any retracting hard tonneaus that fit your truck at this time. This is only current option for your truck that will allow you to have both the ladder rack and hard tonneau.
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Alex H
Written by:
Matthew S
Video by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.