To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get a little extra security when you are towing with Curt's double-lock, gooseneck hitch. Chrome-plated ball locks in place with two pins while towing and flips over for storage inside the hitch when its job is done. Installation kit included.
Features:
Specs:
The Curt Double Lock underbed gooseneck trailer hitch provides a sturdy, secure connection for towing your gooseneck trailer and also allows for a clean, unobtrusive look for your truck bed when you aren't towing. To tow, simply pull the included handle out to unlock the hitch. Then insert the chrome-plated hitch ball into the ball hole. You may need to rotate the ball to line it up with the dual locking pins. When the ball drops into place, rotate the handle counterclockwise until the locking pins snap into position. Because there are 2 locking pins instead of 1, you get extra security for your towing setup.
Get full bed access when you're not towing. Just remove the ball, flip it upside down, drop it back into the ball hole of the hitch, and use the handle to lock the ball in place. A rubber cover is included with the Double Lock. When the ball is stowed upside down in the hitch, place this cover over the ball hole to keep out dirt and grime and create a clean look for your vehicle.
Average Customer Rating: 4.6 out of 5 stars (624 Customer Reviews)
Get a little extra security when you are towing with Curt's double-lock, gooseneck hitch. Chrome-plated ball locks in place with two pins while towing and flips over for storage inside the hitch when its job is done. Installation kit included.Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it.
The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together.
Once the threads were clean, everything assembled very well.
The hitch takes time to install, at least if you want it to look good and be correct.
On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.
Ordered this after deciding to go with it over a B&W kit due to me not using it a whole lot and the price difference. When I received the package 1/2 the hardware was missing because the inner box it was in was all broke apart and the outer box was not sealed up. So I would have to give the packaging and shipping one star because I had to go spend an extra $75 on grade 8 hardware. The paper directions were not totally clear on several thing so we resorted to the video which helped a lot. The two large carriage bolts that go in the rear cross member are a little deceiving because the video makes it seem like they slip right in. However, the heads were larger than the pass through in the frame rails so it took quite a bit of extra time and ingenuity to get those fished through there with the plates.(The carriage bolts survived shipping so they were what came with the kit). In the video it showed where he cut a large u out of the inner fender to clear the pull handle and notched the bed that looked kind of sloppy. With a few extra measurements you can just cut a hole in both for handle to slide through and give it a much cleaner look. Definitely recommend putting a bolt through receiver holes and using a strap to hold up center plate through hole in bed after you get it into place. Makes life a lot easier until you get the bolt ls in. Overall this hitch works and functions great. Install went pretty smooth with two people and I would recommend it to anyone needing a hitch.
We have 2 Dodge Ram pickups in the family and this is the second one that we have bought. Installed ourselves with the good instructions and works great. Like the idea of removable ball to achieve a flat storage area in bed of pickup, when not towing. Have pulled fifth wheel camper plus a boat with no problems.
good product. took five hours to install. Pictures could have been better as the light in the picture was not good. black and white did not have good detail. small issue that was over come for putting one in for the first time.
once everything was figured out where it was to be placed it went well. I put it in a 2014 dodge ram 1500 only hang up I had was with torqueing the bolts next to the gas tank which is not either ones issue. hauled my four horse trailer the morning after and everything held and road smooth. ball is easy to remove and flip and easy to grease as well. All material provided fit as it should and thread on as it should. I save about two hundred dollars with this curt kit. I am very happy about the purchase.
seems like a good hitch, the handle to release ball was 3 inches to short had to lengthen, also had to add spacers on rear support as not to draw center forward to far
Everything arrived on time, and boxes look in good shape. Great experience with etrailer.!!!
As advertised box and hardware took a beating during Shipping.
Box had a corner tore and the bag of bolts torn.We were short a few bolts and nuts.
Quick delivery. Looks easy enough to install. Directions are difficult to read, but found an electronic version on-line that was helpful.
Great product!
Awesome Service...Have not installed yet...Didn’t expect delivery so quick...Thank you definitely will be doing future business with you all...
Well built
Very pleased with product and entire pr ocess
2014 F150
Wow, what can I say, this is an extremely solid, well built unit.
I knew it was about 90 pound, but when you take it out of the boxes the quality really hits you. Everything fits just as it is supposed to. The bolts are all Grade 8, and when you get everything torqued you know this unit is truly part of the truck frame.
Maybe a little over kill for our 5500# Escape 5.0 TA, but I wanted that confidence while connected, and I got it.
Coupled this with the Anderson Ultimate Hitch in Black Out and couldn't be happier.
Great product but the instructions are a little muddied. I replaced a welded in under bed gooseneck hitch with this unit. I chose this unit over a single pin gooseneck flip ball for the added mental security as well as potential for less rattle
I had already had to return 2 hitches to another company because they sent the wrong ones. I ordered from etrailer.com and got the right hitch the first time and it has been amazing! The directions wanted the hole drilled in the wrong spot in my bed so before you start drilling make sure you measure and check and double check EVERYTHING. But that was literally the only thing that wasn't perfect. I haul valuable lives with my truck and this hitch has been great!
Easy installation. We had 3 guys and were done in 20 minutes less than instructions said. Works fine as frog's hair! When measuring the hole in the bed remember to measure from the front of the bed and rear! Then look underneath for the bed crossmember.
I really like the hitch as it was easy to install and being a turnover ball it leaves my bed free when I need to haul something. Very sturdy product and I would recommend it to anyone looking for this style of gooseneck hitch.
Got this for our new camper last year. Did the installation myself with a few buddies very straight forward directions. We use a Reese goose box with the curt 4” off set ball on our 08 short bed truck! Would definitely recommend
It mounted perfectly in my 2015 F150. Getting the rubber seal on, was a chore. Torquing the bolts was tricky in confined spaces under the truck and in the wheel well, but it can be done with a 2' torque wrench and all bolts are reachable. 1-2 clicks at a time. There's no way this is a 90 minute job for a novice, especially without a lift. Plan on 4 hours. the 43.5" measurement adding 1/8" with bedliner is dead on. Measure 3 times to be sure. The instruction are good, but it's easier to follow the installation video.
I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe.
Thanks
Awesome gooseneck Hitch!!!
Easy installation !!!
Do you have a question about this Gooseneck Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike W.
12/21/2023
Still 100 accurate review a year later. This was a nice hitch w good instructions. We have used it many times and have had zero issues w it. The wiring kit we installed inside the bed worked out really nice too. Everything took the better part of the day to install, this isn’t a 1 hour install. I keep 30 psi in the airlift coil spring bags and the truck doesn’t even have any rear sag. Id definitely recommend it again.