Use this pump in your shop to easily transfer oil from large barrels to smaller containers. The simple, lever-action pump requires no power and can effectively move highly viscous oils, like gear oil.
Features:
Specs:
Easily transfer viscous oils from a 15-gallon, 30-gallon, or 55-gallon drum with this ergonomic, lever-action pump. Start the oil transfer by simply pumping the lever up and down until liquid begins to flow from the disharge spout. When you are finished siphoning, simply stop pumping the lever.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this Tera Pump manual lever action oil transfer pump. Now, this manually operated pump requires a simple pumping action to begin siphoning, providing a flow rate of up to 10 ounces per stroke. The nitrile rubber piston rings are going to give you a smooth operation. And as you can see, I have it here in the upright position.
But I'm gonna go ahead and lay this down here on my table and we're going to look at it from overhead to go over some of the other features that this pump offers. Now, this manual pump is going to let you transfer oil from any 15, 30, or 55 gallon drum to your tractor, truck, or other equipment. So, it's gonna be perfect for garages, shops, yards, and farms, just to name a few places. The telescoping intake tube is going to adjust to fit various drum heights. So, let me see if I can go back to my wide view here real quick just to show you a little bit more of how that can be extended.
And then you just tighten it and loosen it here with this nut right here. And then when it's fully compressed, as we have it right now, it's gonna be about 18 inches long. And then when you have it fully extended, it's gonna be up to 33 inches long. So, that's how much length you can get from this telescopic intake. Now, the diameter is 3/4 of an inch.
And the built-in inch and a half and two-inch bung adapters are going to fit various drum bungholes. Again, inch and a half and two-inch. So, that's built right into this pump and it's gonna give you a nice, snug fit to that drum. This pump is compatible with SAE90 transmission oil, heating oils, motor oils, heavy-duty, heavy oils rather, light oils, diesel and kerosene. It's not compatible with water-based fluids, solvents, acids, antifreeze, gasoline, or drinking water.
This is constructed of steel, aluminum, PVC, and NBR so it's very durable. Feels like it's very rugged and very long-lasting. And just the overall dimensions while we have our telescopic intake pipe fully collapsed, the overall length, we are sitting right at about 36 inches long. And the head itself is going to be about 17 1/2 to 18 inches long. And then the width is about 2 1/2 inches wide. Instructions are included to, again, go over the features of this pump. And give you a breakdown of the parts. So, this is also included with this pump. So, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.