Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Item # C87FR
Retail:$371.95
Our Price: $261.41
You Save: $110.54
Confirmed to Fit
2022 Ram 1500
with factory tow hooks
without factory tow hooks
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (27)
- Q & A (0)
- Photos
2022 Ram 1500 - Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- 500 lbs Vert Load
- CURT
- 9000 lbs Line Pull
- Front Mount Hitch
- Custom Fit Hitch
- 2 Inch Hitch
- Square Tube
Easily attach a variety of accessories to the front of your Ram 1500 with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in the USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31090 Curt Front-Mount Trailer Hitch Receiver
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C87FR
Average Customer Rating: 4.3 out of 5 stars (27 Customer Reviews)
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Eric02/25/2021
This took a lot longer than I thought it would (about 3 hrs), mainly for figuring out how to get the right tool into the right place, but it turned out really good and will be great to put a bike rack on the front while towing our trailer in the rear. I was also able to re-install the tow hooks as well as part of the installation. You will definitely have to reach way back up in there to install and get ahold of a hitch pin any time you use it, but it looks really clean and you can't really even tell it is there when the license plate is on (you have to remove license plate any time you want to use it). I highly recommend using a floor jack to prop the hitch up into place so you can maneuver it around the air dam a bit more easily and line it up with the holes. The instructions could have used some better pictures of actually how to get it up into place. I had to get it in by just barely fitting it in front of the air dam and then jacking it up and around it. End product though looks really good.
by: Charles06/18/2020
The product and insulation are straightforward. It took approximately 1 1/2 hours to install. More time was spent cutting the shroud as the instructions gave a measurement which was too small.
California requires front license plates which covers the hitch, license plate needs to be removed to install hitch but does the job what time!
by: Frederick 10/24/2022
Dodge Ram Pickup
Pretty easy install on a 2022 Ram 1500. You do have to relocate the front tag, but if you have the skill to install the hitch, moving the tag should be no big deal.
Frederick
10/25/2023
Rock solid. No rust.
Mike L.
11/11/2023
@Frederick Awesome, thanks!
by: Boswell11/18/2021
Took some careful cutting of the air dam (or whatever it's called) but it's proven invaluable. Don't leave home without it, if you want to snake a trailer into someplace you wouldn't ordinarily snake a trailer.
Boswell
11/19/2022
The older I get the more useful this is. Any old man will understand.
by: William08/09/2023
This is not as easy as the instructions make it seem.
There are a many nuts that you need to remove to get the facia out of the way. There are also a number of clips and brackets that need to be removed.
The biggest issue I have is the carriage bolts for the vertical mounts aren’t long enough. They barely get purchase on the bolt.
At the end I of the day it’s installed and I’m only using it for a bike rack. If I was doing anything heavy duty I’d replace the Carrige bolts with longer ones.
by: Mario 01/09/2022
It was very easy to install I'm a DIYer so I only have ramps and a mechanics dolly but I was able to get it done. The online instructions were very helpful, they gave me a clue as to what to expect installation wise. I ordered from etrailer in the past and the item arrived quickly. I would definitely use them again.
by: Dusty09/16/2020
2019 Ram1500
Etrailer shipped product faster than they said, but when got home and package was busted on two ends. Scuff marks on receiver part of hitch and another side. No problem really little paint before I put it on cause using it on the beach. Will never see.
by: Ron 04/23/2021
2019 Dodge Ram Pickup
Perfect fit and very easy to install. On my truck 2019 1/2 ton Ram 4x4 you have to look very close to see it has a front hitch.
Ron
4/24/2022
One year later the product is working great.
by: David03/05/2022
The brand of product is just that but the difference is in the retailer. etrailer has always been helpful with great pricing.
by: Shannon 11/16/2020
Following the completion of my order I received a shipment notification early the next day. I received the trailer hitch receiver the 2 days after placing my order. The hitch was complete and installation instruction were provided. Installation took about 2 hours. I recommend purchasing from etrailer.com.
by: Carl 03/15/2021
It was a perfect fit. I only gave it 4 stars because the instructions could have been better.
The instructions for the 2 bolts that go in from the front could have been better. I saw that if you take out the 2 covers where the tow hooks go through the front, you can get to those 2 front bolts very easily. Nowhere in the instructions does it tell you that.
by: Carl04/14/2021
easy no drill installation. perfect fit.
Should have two people to install because of the weight, but one person can do it if you have a jack to put in place.
Everything went smoothly. Also quick delivery which was nice and well packaged so no damage.
by: Catherine 09/18/2022
all parts fit without any trouble
by: Mario 07/06/2022
Easy install just getting too old about 3.5 hours look good
by: Steven 09/14/2020
Easy to order, easy to install, good price and it showed up quick.
by: 05/06/2024
by: Stef08/22/2020
Fast and what I needed
by: Thomas02/20/2023
2021 Ram1500
by: Richard 08/14/2022
by: Blair 04/03/2024
2019 Ram1500
by: James12/20/2022
by: Doug 12/09/2022
by: Karen 12/15/2022
by: Guy 08/12/2022
2020 Ram1500
by: Elizabeth 04/13/2021
25
27
Show More Reviews
See what our Experts say about this CURT Front Receiver Hitch
- Curt vs. Draw-Tite Front-Mount Trailer Hitch Receiver for 2021 Ram 1500
I would be happy to answer that question for you. The main difference between the Curt Front Hitch Receiver item # C87FR and the Draw-Tite Front Hitch Receiver Item # 65081 is the difficulty in installation. The Curt is way easier to install. You have to remove the front air dam and splitter to install the Draw-Tite. They both have identical capacities with a 9,000 lbs line pull and a 500 lbs vertical load limit. Since the capacities are the same I recommend the Curt item # C87FR based...
view full answer...
- How To Mount SnowBear Snow Plow on a 2022 Ram 1500I do have an option for you but the only snowplow mount options for a 2022 Ram 1500 are hitch mounted therefore you will need a front mount trailer hitch, the Curt Front Mount Trailer Hitch Receiver part # C87FR is what I recommend. If you have a two point mounted snowplow you'll need to convert to hitch mount using the Retrofit Kit for SnowBear Winter Wolf Snowplows part # SB324-120.
view full answer... - Front Hitch that Fits 2022 Ram 1500 with eTorque EngineFor the 2022 Ram 1500 with the eTorque engine the front hitch you'd want is the Draw Tite part # 65081 which I confirmed as a fit for your truck unless it has factory tow hooks. The Curt you mentioned does not fit your truck. At this time Curt does not have any fits for your truck.
view full answer... - Is Curt Front Hitch C87FR Same as 31090 for 2022 Ram 1500 Big HornOur Curt front hitch # C87FR is the same as the Curt part number 31090. We changed the part number but if you order the # C87FR you'd receive the Curt 31090.
view full answer... - Is There A Front Mount Trailer Hitch For 2022 Ram 1500 Limited Longhorn Non-ClassicThere is a front mount hitch for your 2022 Ram 1500 Limited Longhorn that isn't the Classic, but it only fits if you do not have the factory towing hooks. You'll need to the Curt # C87FR to fit your truck.
view full answer... - Front Hitch For A 2019 Ram 1500 Hello Charles. Thanks for reaching out. We do indeed carry a front hitch for the 2019 Ram 1500, the Curt Front Mount Trailer Hitch # C87FR. It will be a no-drill install, but the front bumper will need to be full removed temporarily. The OEM tow hooks, if present, will be permanently removed. Please note that this front hitch is not compatible with Rebel or Diesel engine models.
view full answer... - Is There A Front Hitch For The 2022 Ram 1500 Eco Diesel?Hello Bill. Unfortunately, we do not offer a front hitch for the 2022 Ram 1500 diesel. Draw-Tite used to offer a hitch, part # 65081 that did fit the diesel models. This hitch is currently unavailable though as it is on extended backorder with no ETA. The only real solution we can offer would be to carry your bike with a rear hitch like part # e28ZR, but that will depend on the rest of your towing setup. Another option would be to carry your bike on a roof mounted bike carrier. This...
view full answer... - Is the Curt Front Mount Trailer Hitch Receiver Compatible With Automatic Air Dam on 2021 Ram 1500The Curt Front Mount Trailer Hitch Receiver # C87FR will not interfere with the automatic air dam on your 2021 Ram 1500. See the attached photo which shows the hitch installed on a Ram 1500 like yours. The automatic air dam can be seen in the lower left hand corner of the picture.
view full answer...
- Recommended Front Mount Hitch For 2020 Ram 1500 Lone StarYes, the Curt Front Mount Trailer Hitch Receiver part # C87FR is a great option for a front mount hitch on the 2020 Ram 1500 Lone Star. It is rated for a line pull of 9,000 lbs (winch) and vertical load of 500 lbs (tongue weight). I have attached the installation instructions for your reference.
view full answer... - Will Curt Front Hitch for 2019 Ram 1500 Block License PlateI do show that the Curt Front Mount Trailer Hitch Receiver part # C87FR which is a fit for a 2019 Ram 1500 will interfere with the license plate but only when the hitch is in use. Therefore, if you don't have anything in the hitch then the plate can remain in the factory location. I would simply use the upper mounting holes in the bumper for the lower mounting holes on the license plate while the hitch is in use.
view full answer... - Front Mount Trailer Hitch For A 2020 RAM 1500 Limited With Speed Activated Automatic Air DamYes, per Curt The Curt Front Mount Trailer Hitch Receiver # C87FR is confirmed to fit your 2020 RAM 1500 Limited with speed speed activated air dam factory hooks and e-torque engine. The front mount hitch has an easy, bolt-on installation with no welding required. It has a gloss black powder coat finish over steel that resists corrosion. The hitch has a line pull of 9,000 pounds and has a vertical load up to 500 pounds.
view full answer... - What Does the Curt Front Hitch # C87FR Look Like Once Installed?Yes! I can definitely provide you with a photo of how the Curt Front Hitch # C87FR looks when installed on a compatible Ram model. Please see the attached picture for your convenience. The truck in the picture is a 2020 model. The great thing about the Curt front hitch is that it has invisible crosstubes that makes for a more factory look without any visible bulky components.
view full answer...
- Best Trailer Hitch Option for a 2021 Ram 1500 with Tow HooksI do have an option for you but the only trailer hitch option we offer for a 2021 Ram 1500 with tow hooks is the Curt Front Mount Trailer Hitch Receiver part # C87FR. The hitch is pretty recessed behind the bumper which makes for the best overall appearance but this does sometimes mean the hitch pin may be a little more difficult to use. The hitch is something you'll be looking at everyday so the priority is appearance for most.
view full answer... - Will Curt Front Hitch for 2019 Ram 1500 Work with Active Air DamThe Curt Front Mount Trailer Hitch Receiver part # C87FR which is a fit for a 2019 Ram 1500 will work on models with the active air damn behind the fixed splitter. This can actually be seen in a photo from the instructions which I attached below, it's in the lower left hand corner.
view full answer...
- Do Tow Hooks Have to Remove for Front Hitch to Fit 2020 Ram 1500The tow hooks of your 2020 Ram 1500 do need to be permanently removed to install the Curt hitch # C87FR that you referenced. There isn't a similar hitch that would allow the tow hooks to remain.
view full answer... - Curt Front Mount Trailer Hitch Receiver Cutout For a 2021 Ram 1500 Big Horn Built to Serve EditionThe Curt Front Mount Trailer Hitch Receiver # C87FR will fit your 2021 Ram 1500 Big Horn Built to Serve edition truck. It will require you to trim out a 2.5" x 2.5" section of your lower fascia panel. I have included an image to show what must be trimmed. The WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL is great to fill the receiver hole. It will help protect your front bumper and provide the additional step to access under your hood.
view full answer...
- Does Curt Front Hitch fit 2019 Ram 1500 with a Speed Deployed Air DamI double checked with Curt and the only versions of the 2019 Ram 1500 the Curt front hitch part # C87FR does NOT fit is the Rebel or Diesel engine models. So, if you don't have a Rebel this would work. The retractable air dam you mentioned would be behind the fascia this hitch fits through so it would not be an issue.
view full answer... - Front Receiver for 2019 Ram Big Horn 1500 With Tow Hooks2019 was a split model year for the Ram 1500, where they produced 2 different models. The Ram 1500 Classic is identical to the previous model year, while the 2019 Ram 1500 is an all-new model, the first model year of the 5th generation. If you have the Ram 1500 Classic, you'll want to use the Draw-Tite # 65062, which will require removal of the tow hooks. If you have the 2019 Ram 1500 (not the Classic) and it isn't a Rebel or a model with the Diesel engine, the Curt # C87FR will fit,...
view full answer... - Front Hitch Recommendation for 2020 Ram 1500 for Bike Rack and Cargo CarrierThe only front hitch currently (May 2022) available for your 2020 Ram 1500 is the Curt # C87FR. This does require you to remove that front fascia air dam under the front bumper but you will need to make a cutout for the hitch receiver to fit through and then you'll reinstall it. This is pretty normal for pickup trucks and front receivers. Half the time you can install it without modifications and then the other half you do have to do light or heavy modifications.
view full answer... - How To Carry a Kayak and Canoe on a 2019 Ram 1500 While TowingIn order to carry a canoe and or kayak on your 2019 Ram 1500 I recommend placing them on a roof rack with a roof mounted carrier as you don't really have any other options when towing a trailer. For a roof rack, I recommend the Yakima CoreBar Crossbar System which is composed of part # Y00423, part # Y28TR, and part # Y06135. This system has aero shaped cross bars for reduced wind noise and a sleek look. In order to secure a canoe and or kayak to the above roof rack, I recommend using...
view full answer... - What is the Weight on the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" part # C87FRThe weight on the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" part # C87FR is just under 50 Lbs. This is also confirmed to fit your 202 Ram 1500.
view full answer... - 2021 Ram 1500 Classic Warlock Front Mount Hitch Receiver RecommendationThe only front hitch designed to fit your 2021 Ram 1500 Classic Warlock is the Curt # C87FR. It will require you to remove the front tow hooks like you mentioned, but some of the reviews we've received back show some people have been able to get the tow hooks back into place so it might still be possible to have both. Unfortunately TorkLift doesn't have an EcoHitch made that fits the 2021 Ram 1500 models so this Curt is the only thing that fits.
view full answer... - Does Curt Front Hitch # C87FR Fit 2021 Ram 1500 with Tow HooksYes, the Curt front hitch part # C87FR that you referenced is a confirmed fit for your 2021 Ram 1500 with factory tow hooks. The tow hooks of the truck do need to be removed to install this hitch though which is the case for all front hitches that fit your vehicle.
view full answer... - Front Mount Hitch Recommendation for a 2019 Ram 1500 New Body StyleFor your 2019 Ram 1500 with the New Body Style I recommend the Curt Front Mount Trailer Hitch Receiver # C87FR because it features a hidden crosstube for a clean looking install. I was actually speaking with Curt about this fitting with tow hooks the other day and they said that the pickup cannot have tow hooks. If it does have tow hooks then they need to be removed. Attached is a photo of what this front mount hitch looks like installed as well as the installation instructions for you...
view full answer...
Do you have a question about this Front Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Edited by:
Lindsey S
Updated by:
Wilson B
Updated by:
Noah M
Written by:
Kristina F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tim V.
8/4/2022
I gave up trying to install the front hitch on my 2020 Ram. ped the truck Off at local shop. Figured with a lift and a couple of guys it would be a slam dunk. Surprised when I picked up the truck the guys said it was a very difficult installation. Took 3 guys to get the hitch in place and install with the provided hardware. I was not present during this part of the install but I know and trust these mechanics and have used them for many years. I installed a similar hitch on my previous truck- a 2004 Tundra. I was able to do that one by myself. My advice to anyone planning to install a front hitch on a Ram 2020 to seriously consider use of a lift and skilled mechanics.