70 Series Fishing Rod Holder - Flush Mount - Cast Bottom w/ Drain - 1-5/8" ID - Stainless Steel

CE Smith Fishing Rod Holders - CE53670CA

9" Long, flush-mounted rod holder lets you use up to an 80-lb class fishing rod. Cast bottom has 3/4" drain for attaching a hose to route water into the bilge. Large flange provides strength. Built-in gimbal bar keeps rod from spinning.

Features:

• Flush-mounted rod holder holds 1 fishing pole (up to 80-lb class)
  • Lets you fish hands-free and have multiple lines in the water
• 3/4" Drain lets you attach a hose to route water into the bilge
  • Ideal for mounting the holder over dry storage areas
  • Threaded hose barb and hose (not included) required to route water
• Rounded cast bottom provides added safety when mounted in open gunwales
  • No sharp edges to scrape your shins or your gear
• Straight angle is great for gunwales with limited clearance
  • Requires less space under the gunwale
• Heavy-duty 316L stainless steel construction is rustproof and corrosion resistant
  • Polished mirror finish looks good on your boat
• Wide, low-profile flange is welded to tube for durability
• Tall, built-in gimbal bar helps keep your rod from spinning
• Vinyl liner protects your rod from scratches and scuffs
• Holder mounts in your boat's gunwale
  • Requires that a 2" diameter hole be cut into gunwale
  • Attaches with (3) 1/4" bolts or screws (not included)

Specs:

• Length: 9"
• Tube inner diameter: 1-5/8"
• Tube outer diameter: 2"
• Tube wall thickness: 1.2 mm
• Mounting flange dimensions: 4-1/2" long x 3-5/8" wide
• Gimbal bar dimensions: 1/4" wide x 1/2" tall

This hefty stainless steel holder will keep your rod steady whether you're doing some serious trolling or enjoying a recreational day on the water. Part of CE Smith's 70 Series line of 9" long rod holders, this model features a rounded cast bottom with a built-in, threaded drain for attaching a hose to route water into the bilge. The straight angle of the holder ensures that it will take up less room under the gunwale than a rod holder that has a 15-, 20-, or 30-degree angle. When mounted in a flat gunwale, the straight holder will hold your fishing rod in a vertical position.

Route Water Away from Dry Storage Areas

Using a rod holder over a dry storage area is no longer an issue. This holder has a threaded 3/4" diameter drain built into the bottom. Attach a 3/4" threaded hose barb with a drain hose (not included) to route water into the bilge so the rest of your boat stays dry. The large diameter of the drain helps minimize clogging, which is frequently seen with rod holders that have smaller 1/4" drains.

Rounded Cast Bottom

A smooth, rounded cast bottom is safe for mounting in open gunwales because there are no sharp edges to scrape your shins or to snag your gear.

Strong Gimbal Bar and Protective Vinyl Liner

There's a 1/4" wide x 1/2" tall gimbal bar positioned above the drain that can withstand the harsh conditions that heavy tackle or downrigger mounts can unleash - unlike standard gimbal pins that can get bent or knocked out of place. It's built into the holder and reinforced with welds, making it a virtually indestructible anchor that keeps your rod from spinning inside the holder. This tough gimbal bar also helps boost the overall strength and rigidity of the rod holder.

A protective, UV-resistant vinyl liner keeps your rod free of scratches and scuffs. The liner is notched to fit around the gimbal bar so that it stays in place and won't twist or spin.

Sturdy, Rustproof Stainless Steel Construction

This heavy-duty, 1.2-mm-thick rod holder is made with 316L stainless steel, which is highly resistant to corrosion and rust, even when exposed to saltwater. The exterior is polished to create a mirror-like shine that makes an attractive addition to any boat.

The 4-1/2" long x 3-5/8" wide flange is welded to the tube to create a strong connection, and it has a sleek, low-profile design that allows it to sit flush against the gunwale so it won't snag your line. For added strength, use a backing plate (CE53673A - sold separately) with this rod holder to reinforce the mounting area.

Installation requires that a 2" diameter hole be cut into your boat's gunwale to fit the holder. The holder will drop into this hole and then secure flush to your boat with (3) 1/4" bolts or screws (not included).

53670CA C. E. Smith 70 Series, 0-Degree, Gunnel-Mount Fishing Pole Holder with Round Bottom and Drain - Stainless Steel