Deka Cable Ties Kit - UV-Resistant - Black - 18 lb Tensile Strength - 6" Long - Qty 10

See what our Experts say about this Deka Electrical Tools

• Recommendation For Wire Harness For 2018 Mazda CX-5 And How Best To Install The 12V Power Wire
  While there may be a power source in the back of your 2018 Mazda CX-5, you will need to run the wire for power to the battery. The Tekonsha T-One Wiring Harness With 4-Pole Flat Connector, Item # 118746, is specifically designed to work with your vehicle and the routing of power directly to the battery is the best way per the manufacturer to install it. After running the wire up to the battery, you will need to install the included fuse per instructions. One of the main reasons for...
  view full answer...
• Custom 4-Pole Wiring Harness for 2019 Jeep Cherokee
  Curt 4-pole wiring harness # C56406 and the similar Tekonsha # 118779 will work fine on a 2019 Jeep Cherokee with or without the factory tow package being present. Both of these custom-fit kits plug in to the wiring at the tail lights and they will function correctly either way since they are wired independently of any tow package wiring. I recommend the Tekonsha kit because in our experience their wiring products are the most reliable. These harnesses feature a powered tail light converter...
  view full answer...
• Recommendation For 8 Pin Connector To Protect And Secure It When Not In Use
  We don't have a cover for an 8 pin connector like you pictured. To keep this connector from corrosion, I recommend using dielectric grease # 11755 and electrical tape to cover the ends. I also recommend using zip ties # DW05724-10 to keep this harness tight to the other wiring harness.
  view full answer...
  
• 4-Way Flat 24 Inch Extension Recommendation
  For a 24" 4-Way Flat extension we have the Hopkins Endurance Easy-Pull # HM47004. I like this design because there is a big loop for the connector so it's easier to disconnect the 4-Way ends instead of chancing some damaged wiring. If you'd rather use a standard 4-Way extension then you can use the part # 18044 you mentioned and just bundle some of it up with a zip tie, like what we find with the kit # DW05724-10, to take up the slack. Attached is a review video for you to check out.
  view full answer...
• Best Protective Wire Loom for Installing Cargo Carrier Light Kit 98174LED
  To install the cargo carrier LED Light Kit # 98174LED I suggest you use the 1/2-inch wire loom # 459075-1. This is the largest size we offer and it will make installation a bit easier. It is sold by the foot. Some extra zip ties # DW05724-10 might help too.
  view full answer...
• Recommended Tail Light Solution To Attach To A Cargo Net
  While there is not an option like what you're looking for, I do have another solution. Take a look at the: -Curt Auxiliary LED Indicator Lights # C53201. These lights measure 7" long and will utilize the same 4-pin style like # PE26UR that you're looking at. These lights are not magnetic, however with the shape of the lights being a bar you could easily use some zip ties # DW05724-10 to secure it to your cargo net. If you wanted a more permanent mounting option, that is also available...
  view full answer...
• How to Wire Electric Brakes on Gooseneck Trailer
  Let's start at the brake assemblies/hubs on your new gooseneck trailer. The two wires coming from each assembly look exactly as they should. One wire will ground to the trailer frame and the other wire will attach to the brake output wire. The fact that you do not know which wire does what is absolutely okay! This is because brake magnets do not have polarity, so either wire can be used for either function. You will then need to run wiring from the front of your trailer to these trailer...
  view full answer...
  
• Can I install the Peterson Plate Light with Bracket on the Curt 17x46 Cargo Carrier
  Since the Peterson Plate Light with Bracket, part # PM436B, weighs in at under a pound, I don't see any problem with installing it on the 17x46 Curt Cargo Carrier # C18145. If you would rather not drill into the cargo carrier frame you can use the Deka Cable Ties Kit # DW05724-10 to secure the bracket to the cargo carrier although it might not be as sturdy. You might also need some extra Wiring # 12-1-1 and Butt Connectors # DW05745-10 so finish the installation.
  view full answer...
• Best 4-Pole Wiring Harness for 2018 Lexus RX 350 with Factory Towing Package
  The 2018 Lexus RX 350 with the factory tow package wiring prep will have a connection point designed to match the plug on parts # 118252, # 56083 and # HM11141945. Each of these three similar items will work with the factory tow package that has a square connector to mate with the one shown in the included photo. Of these three products I recommend the Tekonsha # 118252 because we find their electrical items to be the most reliable of all those we offer. Please refer to the included installation...
  view full answer...
  
• Recommended Base Plates and Flat Tow System for 2015 Jeep Wrangler
  For your 2015 Jeep Wrangler to use the Tow Defender # RM-4750, you will need the Roadmaster EZ4 Base Plate Kit - Removable Arms # RM-521448-4. This combination will work well with the Roadmaster Nighthawk All Terrain Tow Bar w/ LED Lights # RM-676. Then you will need a wiring kit for your Jeep. I recommend the portions of the Roadmaster wiring kit # RM-15267 that aren't already integrated into your tow bar. These parts are female spade # RM-300115-00, 3 feet wire loom # 459075-1, 30...
  view full answer...

Do you have a question about this Electrical Tool?