To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required.
Features:
Specs:
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, on the driver's side. You will have to remove some interior trim paneling to access this harness.
Once installation is complete, the 4-way connector will be stowed in your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (10 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required.Wiring Harness was as described, and perfect for my particular application. Shipping was extremely prompt, and follow up service was gratifyingly good. Would certainly recommend this seller.
Less than $20 for a custom 5wire-to-4wire adapter=great deal. It's a little tricky getting the passenger rear side panel loose enough to gain access to the plug-in point on a 2003 Element but the instructions were decent. 2 of the 6 screw points were not pointed out but the screw count was correct. Prolly shoulda said right rear seat must be removed and reinstalled. Could have highlighted plastic tab positions that require care instead of just generally warning to not break any of them. A little surprised that there was NO identification on the module itself, not even a part# sticker. Took me about an hour to install but that included some major housekeeping/detailing; dirt accumulates in areas not normally seen. Dirt accumulates in the commonly seen areas in MY cars too. That was a lot of nit picky stuff; I am very pleased. Only took 4 days for value shipping (USPS) to SE PA.
Robson D.
6/10/2019
Still works great after a year has been really useful. Ive also installed one for a 2003 Chevy Tracker to replace a failed Curt.
Been about a year now and the trailer wiring harness I ordered for my 1999 tracker plugged in to the car harness and has worked very well
By temporarily removing the factory jack from its nest and removing the left rear tail light assembly, I had ample access to drill routing holes and plenty of room for cable wrapped excess wire. Piece of cake install.
Very easy install, could not be simpler -- no tools required
Excella product and company! AP
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
6/13/2018
I do recommend using a trim panel removal tool to safely loosen trim panels and remove fasteners. Part # ALL648544 helps to safely remove plastic or metal fasteners from door panels, dashboards, and consoles.
Helpful Links
Tools/Powerbuilt/ALL648544.html