Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
Item # C55384
Retail:$45.95
Our Price: $33.71
You Save: 27%
Confirmed to Fit
2001 GMC Sierra
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (626)
- Q & A (0)
- Photos
2001 GMC Sierra - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- 4 Flat
- Trailer Hitch Wiring
- CURT
- No Converter
Quickly and easily install a 4-way trailer connector on your GMC Sierra with this custom harness. T-connector plugs directly into 7-way OEM tow package wiring harness - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package that has a 7-way connector
- Retains 7-way connector functionality
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points behind rear bumper
- Plug in T-connector
- Comes with dust cap for 4-way flat connector
- Limited 1-year warranty
Installation
This custom-fit T-connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper. Simply plug the harness in-line with your existing 7-way wiring harness.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
55384 CURT T-Connector - OE 4-Flat Upgrade
Installation Details
California residents: click here
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector - C55384
Average Customer Rating: 4.8 out of 5 stars (626 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into 7-way OEM tow package wiring harness - no cutting, splicing or tapping required.by: Vincent 03/21/2023
Quick & easy trailer wiring harness replacement . took less than 15 minutes
by: Slpugh04/22/2024
2005 Chevrolet Silverado
Installation was very easy and only took about 15 minutes to hook up and secure wiring on truck.
by: Gerald03/23/2024
2005 Ram 2500
Top quality trailer hitch at a very reasonable price!
Chevy 2500 HD 2005 Duramax
by: Dan 11/15/2023
Yup. Still works after a year in operation. The only thing I am unhappy with is my vehicle thinks there is always a trailer connected and the backup sensors and side sensors are automatically disabled.
by: Donald 02/27/2024
This product was exactly what was portrayed on line. Wiring harness was very simple to install and works extremely well.
by: Jerry 05/14/2024
Works well easy plug and play
by: Mcrae11/18/2023
When I finally installed it about 3 months ago, the plug in connectors did not match what I had on my truck. I ended up just cutting them off and splicing them into the connector from my truck
by: Nathan 03/26/2024
2014 Chevrolet Silverado
Exactly as described. Fit perfectly into my 2014 Silverado bumper outlet.
by: Christopher 03/29/2024
2017 Jeep Grand Cherokee
Easy plug and play simple installation.
by: Tony B.12/15/2018
2018 Dodge Ram Pickup
I installed my Curt T-Connector today to my 2018 RAM 1500 Sport 4x4 Crew Cab. The mileage on the truck is at 10679km's. Although warned that the spare tire might require removal (via web site info from fellow RAM owners) that was not the case as there was enough room to remove the OEM connector (which is the short end of the assembly) from the factory housing. The actual disconnect and re-connect took only a couple minutes. I spent a about 15 or 20min's trying different wiring run routings for the aux. four connector plug wiring run. Some tie-wraps where installed to snug things up out of the way and I was done. I also dosed the connections with a shot of Krown 77 lube/rust inhibitor. I'm in the "Great White North" so salt use on roads is a given during the winter months. A quick test run of the lights and I was done. The build quality of the T-Connector is very good..equal to OEM or better I'd say.
by: Julie 05/20/2024
No issues thank you
by: Richard07/23/2023
2001 Chevrolet Silverado
Unfortunately, the product ordered did not fit my application and I will be returning!
Jenny N.
7/26/2023
I wanted to ask if your 2001 Chevy Silverado came with the tow package? Did you already have a factory seven way? If not, the part # C59236 would be the better fit.
by: Kirk 05/09/2024
Easy to install
by: Scott 11/02/2023
Fast delivery, and easy to find products. Second trailer hitch I bought from e-trailer. Great products
by: Jason m07/20/2019
Awesome!! I bought an OPT7 triple LED light bar for my Chevy Colorado and I didn’t want to splice wires or lose a whole lot of time trying to figure out how to wire it up so I googled and I came across a gentleman who used this product and Im very thankful for this connection and my light bar works smoothly and I have full use of the reverse camera AND I don’t have any wire mess outside or underneath my truck! Easy to install, my first time doing this and it literally took me about 2 minutes, if that! Definitely would recommend this product to anyone with a truck!! Thank you guys!!
by: Virgil06/06/2022
Was exactly as stated in description. Just unplugged old plug and plugged in new one. I had two plugs to replace and added an extra "T" plug for another 4 prong. It only took less than 15 minutes to install all 3. Customer service is wonderful. Everything I have bought from ETrailer is top notch and delivered on time or earlier.
Virgil
6/7/2023
Working GREAT. Easy to install
by: Andy l. 08/18/2017
2013 Jeep Grand Cherokee
Order class iii hitch and wiring harness for my 13 keep grand Cherokee . Came next day. Installed in 20 minutes. Great product. High quality and easy install
Product was shrink wrapped, taped and boxed ver professionally. Website also very easy to use
Would definitely recommend to anyone
by: Michael 05/09/2024
2003 GMC Yukon
Perfect fit!
by: Raymond03/15/2018
This is a great vehicle to trailer wiring harness just plug it in and you're ready to go and that's all they are to it plug and go and I recommend it.
by: Pat M08/28/2013
2013 Chevrolet Avalanche
Easy to install works great shipping and communications was fantastic. Now my USMC LED light hitch cover is on the truck without an adapter.
by: Martin m07/22/2017
Perfect fit. Took 20 minutes to install wire harness and hitch receiver.
by: Miseal12/07/2022
2019 Ford Ranger
Easy instructions, installation was a breeze. Very important to torque bolts down to spec. Also will need to have dealer “flash” vehicle to activate trailer lights. 5 stars
by: Caity12/05/2020
Easy to install and tucks away nicely next to the hitch. No hanging wires and really clean look
by: Anita 04/03/2024
2011 Ram 1500
Arrived on time and just what I need.
by: J10/19/2023
Did not match my plug into car. So could not use and returned.
Katrina D.
10/21/2023
Can you please provide a picture of the underside where the plug is supposed to be located? For vehicles with the factory tow package; your install may require additional components or may be used as a replacement harness.
25
625
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Solutions for Using Magnetic Tow Lights while Towing Roadmaster Tow DollyIf you have both a 7-way and a 4-way on your tow vehicle and your dolly uses a 4-way you could use an adapter to connect the # RM-2120 to the 7-way and both should work just fine. Or if you have just a 7-way on your tow vehicle you could install the part # C55384 and you would have an additional 4-way that you could use for your dolly.
view full answer... - Recommended Hitch and Ball Mount for a 2017 Audi Q7Thanks for the picture! The Curt Trailer Hitch item # C13277 you referenced is confirmed to fit your 2017 Audi Q7. This hitch is custom fit and bolts to your Audi with included hardware. To be level you will typically want your ball mount to be within 3" of the height of your trailer's coupler. The receiver on your Audi will be right at 12" above the ground so you will want to use the Curt Ball Mount for 2" Hitches item # C45338. This ball mount will give you 7" of rise. You will also...
view full answer...
- 7-Way Solution to Install Curt 4-Way C55384 on Vehicle with Wired 7-WayIf you replaced the wired 7-way of your 2019 Nissan Frontier with the 7-way/4-way kit part # HM40975-11998 you'd be able to install the # C55384 inline with the connector.
view full answer... - 4-Way Wiring Recommendation for a 2012 and 2014 Ford F150 for LED LightbarsWhat you could do is install a Curt wiring harness part # C55384. This will plug inline with the 7-way at the rear of your trucks and will provide you with an additional 4-way that you could route behind your bumper for your light bar.
view full answer... - 4-Way Wiring Harness Recommendation for a 2004 Ford ExpeditionIf your 2004 Ford Expedition has a factory 7-way installed on it the Curt Harness # C55384 that you referenced would work on your vehicle and would provide it with a 4-way. If you don't have a factory 7-way you would instead need the Curt harness # C58044.
view full answer... - Is Dealer Activation Required for Trailer Wiring Harness # C55384 on 2015 Jeep Grand CherokeeWhen you install the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384, it may be necessary to see a local Jeep dealer to activate the tow package wiring circuit. Some vehicles have the active tow package wiring and others do not, so you will know as soon as it is installed if this is required or not. If you test the function using a tester like # I26, a circuit tester like # PTW2993, or connect it to a trailer, you will be able to...
view full answer... - What is Length of 4-Way Harness of Curt Trailer Wiring Kit C55384The total length of the 4-way harness of the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55384 that you referenced is 36 inches.
view full answer... - Does Using The Trailer Wiring To Power a Headache Rack 3RD Brake Light Cause Vehicle Towing Mode? Using the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55384 will vary from truck to truck if you want to use it for a 3rd brake light. Some trucks will take any power that goes through this connector to tell the computer you are towing while others will not make any changes until it sees power being drawn on the charge line. You can consult your dealership or owners manual to determine if you can use this type of connection. I do know a lot of installers will tie...
view full answer... - Can Curt T-Connector 4-Way C55384 Power Tailgate Lightbar While 7-Way Powers Boat Trailer LightsYou would not have any issue using the 4-way adapter part # C55384 as a way to power your tailgate lightbar while your 7-way powers the boat trailer lights. This is a common solution for your setup that would work just fine. Your boat trailer having LED lights would mean they draw considerably less too so you wouldn't have an amperage draw issue either.
view full answer... - Best Trailer Hitch for 2002 GMC Sierra 1500Yes! The trailer hitch # e98849 is a confirmed fit for your 2002 GMC Sierra 1500! I attached a video of the install process if you want to check it out. If you're using this to tow, you might also want to pick up our towing package with a ball mount # C45036 and wiring harness # C55384.
view full answer... - Recommended Trailer Hitch for 2014 Chevy Silverado Regular CabThe most popular hitch for your 2014 Chevy Silverado regular cab is Curt Trailer Hitch, part # 14301. This is a 2 inch hitch rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight. I have provided a link to the installation instructions for you to review. Also check out the attached installation video. This video features a 2013 Chevy Silverado but the installation is similar. I have also included a link to all available trailer hitches that are confirmed fits for...
view full answer... - Trailer Wiring Harness for a 2001 Toyota SiennaThere are several different wiring harness that will fit your 2001 Toyota Sienna and I have included a link to them for you. However, the harness that you referenced, # C55384, will not fit your Sienna. For a harness that plugs in line with the vehicle tail light wiring you can use # C55418. I have included a link to the installation instructions for you to view.
view full answer... - 4-Way Trailer Wiring Recommendation that Plugs Inline with 7-Way of Honda RidgelineYes, what you'll want is the Curt 4-way wiring harness part # C55384. This will plug inline with the 7-way you have on your Honda Ridgeline and give you a separate 4-way you can use.
view full answer... - Complete Trailer Hitch Towing Package For 2015 Jeep Grand CherokeeI recommend getting the Curt Class III # C13065 so you're not limiting your capacity with a lower rated hitch. This mount will look good over time since it's aluminum # DTBM5200 and here is a ball for it # A-90. I recommend getting a hitch lock # e98882 so someone can't run off with it in a matter of seconds. Here is the wiring you need # C55384 which comes with a 4 pole connector, but you can use this adapter for your 5 pole # 47515 and this adapter for your 7 pole # 30717. For the 7...
view full answer... - Trailer Wiring Harness for 2015 GMC Canyon If your 2015 GMC Canyon has the factory-installed tow package the truck will have an actual 7-way trailer socket at the rear bumper rather than the punch-out plate. You can still check under the back bumper for any wiring/connectors. If you find a round U.S. Car connector (see photo) then you can install a 7-way/4-pole socket # HM40975. The vehicle connector will plug right in to the back of the Hopkins. The 4-pole harness you referenced, part # C55384 from Curt, also uses these same...
view full answer...
- Recommended Hidden Trailer Hitch, Wiring, And Bike Rack For a 22021 Ford Explorer XLTGreat it sounds like you are already on the right track here. The Draw tite hidden hitch # DT66GR is a great choice for your 2021 Ford Explorer XLT. Once installed, only the 2" Receiver is visible under the bumper. Once you pull the pin and remove the receiver, you will not even know its there, save for a small square cut out of the underbody panel, which is really not visible to the naked eye. The 2" receiver will be perfect for a jet ski trailer and virtually any bike rack. For your...
view full answer... - Trailer Wiring For A 2020 Chevrolet SuburbanThe Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55384 is perfect for this situation. The T-Connector plugs into your factory 7-way harness and provides you an additional 4-way connector so you will have access for both. Ideal for pulling multiple trailers with different wiring requirements. You simply remove the existing 7 pole connector from behind the rear of the vehicle and the T-Connector plugs into existing wiring. There is no splicing making for a super...
view full answer... - Parts Needed to Add 4-Way to 7-Way of 2012 Ram 1500Yes you could install the Curt 4-way kit part # C55384 which will plug inline with your current 7 and 4-way and give you an additional 4-way that's active.
view full answer... - Does Brake Controller on 2000 Ford Ranger Need to be Hardwired?There is not a plug and play option for a brake controller on a 2000 Ford Ranger; installing a brake controller such as the Primus IQ # TK90160 will require you to hardwire the unit. You can take a look at how to do this by checking out the help article I've linked detailing how to install a brake controller. You will also need a 4-flat, part # 118344 if you do NOT have the factory tow package or # C55384 if you do have the factory tow package. Additionally, you need the Universal Installation...
view full answer... - Will the Curt Hitch # 13138 Fit on a 2008 Ford Ranger with a Standard Spare TireThe Curt Trailer Hitch # 13138 will fit on your 2008 Ford Ranger with a full sized standard spare tire mounted on the bottom of your truck. This hitch is specifically made to accommodate the spare tire carried under 2008 Ford Rangers and our customers have not had issues installing this hitch on their trucks with spare tires mounted. If you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin and clip and a storage...
view full answer... - Tail Light and License Plate Solution for Transporting Covered BikesThe best solution we have is to use the Thule License Plate Holder # TH35JV for the license plate part of your problem and then adding magnetic towing lights like the Wireless Hopkins # C6304 (you need 8 AA batteries # DU58QR) or Optronics # TL21RK so your tail lights are still visible. Since your Swagman XC2 Bike Rack # S64650 will be covered with the bag you'll need to get creative with the mounting straps for the Thule License Plate Holder but it's the best option for your application. To...
view full answer... - Does 4-Way Adapter # C55384 Fit 2009 Chevy Silverado 2500HDYes the Curt 4-way adapter part # C55384 that you referenced would fit your 2009 Chevy Silverado 2500HD that has a factory 7-way and would give you a 4-way as well at the rear of your truck.
view full answer... - Solution for Towing Trailer with 4-way Behind Trailer with 7-WayYou could use the Curt 7-way to 4-way adapter part # C55384 to add in a 4-way basically behind your current 7-way and then use an extension like the part # HM48235 which is 12 feet long. You could use multiple extension if your camper is longer as needed.
view full answer... - How to Add a Second 4-Way to a 7-Way that is Using a 4-Way AdapterWhat you could use is the part # C55384. This will plug inline with the 7-way you have at the rear of your motorhome and will provide you with a second 4-way. The 7-way would still be active which would allow the 4-way adapter to still function.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Jonathan Y
Video by:
Michael B
Installed by:
Jeff D
Installed by:
David F
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vincent C.
3/22/2024
1 year & still works great, very easy plug & play setup. I recommend putting a small amount of white lithium grease on those connecting, helps protest against rusting.