To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package port - no cutting, splicing or tapping required.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear, passenger's-side wheel well trim panel.
You will have to locate and remove the (5) T-20 Torx screws with a T-20 Torx bit (not included) and pull back on the wheel well trim panel. It might be easier to access this connection if you remove the additional Torx screw holding the harness in place.
Once you've located the wiring harness, remove the protective cover and plug in the connector.
Once you've plugged in the connector, insert the included fuses and relays into their locations in the fuse box, which is located in the engine compartment.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (241 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package port - no cutting, splicing or tapping required.Great product and easy 20 minute install
This connector worked great! Make sure you really press the factory end together with the harness it takes quite a bit of pressure to make the connection.
Hitch fit perfect. This one came perfect. No scratches or imperfections. I always order the though E-trailer. Fast shipping.
Great product made specifically for the Chevy Traverse. Contains everything necessary for the electrical wireing except zipties and wire shield tubing. I tried many of the "OEM" harnesses from Autozone, O'Reilly's and Napa but they did not have the correct plug housing to match the factory plug up in the fender.
Wish I would have found this to start with or that a full package option with a hitch reciever was offered!
Luke
4/2/2023
It worked great! We used it to move 2,300 miles. We had zero issues. Again, great product and better than the competitors!
Purchase a hitch for our GMC Acadia about a year ago. It was easy to install and the directions were very easy to follow. We pulled an empty tandom axle car hauler from Vegas to Southern Arizona and the hitch worked perfect. But the main reason for the hitch was to add a hitch cargo basket to the back of the car when we travel and it works perfectly. Exactly what we needed. Thank you etrailer for this perfect item.
Worked out prefect.
The tow hitch was great quality , fit perfect. My wiring was lost in transit bc shipper damaged box but etrailer rectified that immediately
There is no power to the left hand turn and stop light terminal on the harness after about 6 months of use.
Jenny N.
3/31/2023
It is unfortunate that the harness has stopped working for you. What I recommend first is to unplug the trailer and use a circuit tester like part # PTW2979 to test the 4 flat connector for all the signal functions. If the all the signals check out, then the issue is on the trailer side. If the signals are not working, then continue with the vehicle. Since this one required several fuses and relays to be installed to active the tow package, I would check all the fuses to make sure nothing shorted out. If that does not help it, please let me know.
Helpful Links
excellent videos for getting the right item
As usual, great response time and service. The only thing about the kit is that it was short one 10amp low profile mini fuse, had an extra 30amp, so I just had to pick some up at the local auto parts store. Everything else went off without a hitch.
Thats kinda funny cuz of course I bought the hitch from etrailer as well, which fits and works great!
Thanks!
Super easy install on a GMC Acadia! Plugged in and tied it to the hitch, done.
Items were high quality. The connector on the car was a bit troublesome to access but was not a big problem. Overable experience with the installation was much easier than expected.
Installed the 75528 hitch and C56202 harness for my 2015 Buick Enclave over the weekend. The install was simple and the you tube videos were a big help. There could have been a little extra length on the wire harness, but overall plugged right into my existing connectors. The hitch is hidden and is clean after reinstalling the back cover. Overall very satisfied.
Clay H.
7/5/2017
I havent used it much, but no issues so far.
Needed this kit for the hitch I purchased. came as expected. I decided in the end not to put it on as it is in the high 90's here in Florida. Just didn't feel like crawling under the truck. However I did talk to the mechanic shop that installed it for me and they said it is one of the easier after market hitches and wiring kits they ever installed. Also etrailer was great to deal with as well.
Joey D.
1/6/2018
No issues
EVERYTHING FIT AND WORKS GREAT.
Fit perfectly
Had a hard time finding the onboard plug but watched a video on utube and found it, from that point on everything went ok.
The trailer hitch was easy to install, no problems. I had the trailer lighting hookup installed and it works great. Your products are great!
John B.
6/6/2018
Product performs well!
Excellent product. Access to the vehicle connection was tight but with a little extra leverage was able to mate the connections. Owners manual and fuse/breaker cover diagram aided in the installation of the fuses and breakers. Works GREAT.
Rod W.
12/9/2015
Still working great with no issues. Great product.
Easy instructions, so installed without any issues.
Excellent hitch and cable. Used the video to make the installation easy. etrailer had the best price and support of any of the companies I searched. Thanks!
Kris M.
10/18/2018
The hitch and wiring are great. No problems at all. Easy video installation and printed materials. I will come back if I need anything.
Perfect fit. Ops check good.
Couldn't be easier to install.
Product was shipped quickly and was well packaged.
All parts were in the package.
Installation was easy. Instructions were well written and easy to follow.
Ken
12/19/2017
The products are still working fine.
Super! On the Traverse, the factory provides all trailer wiring at a connector in the right rear fenderwell. This harness easily plugs right into that connector, and is just the perfect length to bring the plug out to the hitch. I used the TrailerMate TM76470 mounting bracket on my Hidden Hitch 87435 receiver. The length of the wire harness is perfect -- reaches just right, without a bunch of extra wire to deal with. The harness includes relays and fuses to add to the factory fuse panel to utilize the factory harness. The instructions are incorrect as to where the battery of the Traverse is (under the floor behind front passengers' seat), and also where the factory connector is (right rear fenderwell), and the diagram for the placement of fuses and relays requires some studying (look in the lid of the factory fuse box - everything is labeled). You DO NOT have to remove the fenderwell to get to the connector -- reaching up there from below is easy. Look at eTrailer's help videos online -- this really is an easy product to install -- with no tools!
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Phillip
10/16/2023
The connector worked fine once I got the factory plug pushed in all the way, pretty awkward place to connect inside the rear fender on my 2013 Traverse.