Front Runner Drop-Down Tailgate Table - Custom Fit

Video Transcript for Review of Front Runner Camping Table - Tailgate Table - FR28EJ

Hello, neighbors. Steve here with etrailer.com, Folks, today we're looking at our Front Runner dropdown Tailgate Table, and it's gonna be a custom fit for some Jeeps. Now, I want you to make sure you're checking out the fit guide here at etrailer.com. Top center of our homepage where it says your make an model, Enter that information, and anything else that ask you to be sure you're getting the correct fit for your specific vehicle. I also wanna point out that this is compatible with some other SUVs, trucks and trailers, and it's an approximate size door or a panel card needed of 27 inches long by 14 and 13/16th wide. And then even with that, you would have to drill to make this fit.

So it's a custom fit, but you could also technically make it fit if you have those dimensions, and a flat steel surface to work. With that being said, let's get into the table. So you are always gonna have a table and a workspace available with this kit. It has a nice dropdown tailgate table, and let's go ahead and show you that. So I'm gonna slide it over.

So I've got the space. You simply pull up on the spring loaded latch, pop that guy over, and then keep in mind this would be mounted to the tailgate or the side there. So it would be in place stationary, and this table will fold down, and it would be, again, hanging off the side of the vehicle, and then you'd simply pull out the rest of the tabletop like so. Now from the underside, there's a little catch here, that's keeping it from being pulled out more than that, so it's never gonna pull out farther than that. That's where it's stuck at.

And that'll give you a full table over here, off the side if you need, and using this space as well. So when it's open like this, some dimensions real quick. It's 44 and one eighth inches long by 14 and a half wide. And overall, this piece here is about 13 inches and one eighth tall. So 13 and one eighth tall.

When it's opened up and in use, whether it's this way or together, it's got a weight rating of 88.2 pounds. And the extension here will work on the left or the right hand opening doors. And then you've got four adjustable rubber stoppers that are gonna prevent rattling. So when this is closed up in here, you've got some rubber stoppers, and stuff that'll help keep it from rattling, and making noise and stuff whenever it's closed up and you're using it. Close it up and simply push it close, like so, and then you would just fold it up, and then re-latch it. (metal clanks) And then just like that, it's latched and ready to go. So let's zoom in here so you can get a little better look at the surface. It looks like obviously a bamboo finish. It's gonna be treated already and everything. It'll be good to go for you for years and years to come. All the metal is a black powder coating steel. It's really sturdy and durable. And it's gonna resist rust and corrosion with the powder coat finish and everything. I didn't lay 'em out because I didn't really have room open in the table, but you've got a nice package here of installation hardware and instructions. There's a lot of nuts, bolts, those rubber spaces I was talking about for keeping it quiet and stuff whenever it's in use and when it's folded up. So you're gonna get that from Front Runner occluded. So folks, this will do it for our quick look at our Front Runner Dropdown Tailgate Table, a custom fit for those Jeeps. Again, check the fit guide to make sure it fits your unit. I'm Steven. Thanks for watching.