Feedback Sports Velo Bike Storage Rack - Wall Mount - Black - 1 Bike

Video Transcript for Feedback Sports Bike Storage - Bike Hanger - 301-16563 Review

Today we're going to be taking a look at the Feedback Sports Velo Wall rack bike storage rack. The Velo rack is a sturdy bicycle storage rack that is perfect for your home or garage. It'll hold one bike at a time. It mounts to any standard wall stud. Durable mounting hardware is included. These arms are on their own track system, so they're able to slide and adjust independently to hold all types of bikes.

There's a lot of different bike frames out there. These can adjust to accommodate those. The unit's going to feature these soft, rubber cradles that protect the bike's frame and finish. The rack itself is made from a durable steel construction. It's going to feature a really nice black powder-coated finish to resist rust and corrosion. A few measurements to go over with real quick.

We're going to take a look at the wall plate, starting with the overall length, measuring edge to edge, that's going to measure about 11 and 7/8 of an inch. If we go side to side this direction, that wall plate is going to give us a width measurement of about 3 and 5/8 of an inch wide. The mount holes on the unit, there's one right here and one right here, those are separated on center by 10 and 1/4 inches. The cradle distance to the wall, so from the wall or from the back of the wall plate to the center of the cradles, that's going to measure 12 inches. The overall width that we have from outside of cradle to outside of cradle, going edge to edge, that's going to give us a width measurement of about 12 and 1/8 of an inch.

This unit's going to feature a load capacity of 70 pounds. Installation is quick and easy. What you'll need to do is locate your wall stud, and attach the wall plate with the included hardware, then attach the rack arms with the included strip nuts and hardware. Then you can adjust them independently up and down so that the bike wheels are parallel with the floor, and then you simply tighten them back into place to lock them into that position. When you're ready to make your adjustments, all you've got to do is take the included Allen tool, loosen up the bolts just like that. There's a plate that slides into the screw, then you can adjust this up and down and you can actually completely remove these from the wall plate if you want to as well.

Then when you have your new location set, using the included tool, and firmly tighten them back into place. That's going to do it for today's look at the Feedback Sports Velo Wall rack bike storage rack.