Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces a broken cylinder in your BOLT toolbox latch or you can change the latch to fit a different ignition key.
Features:
Note: BOLT locks permanently code to only 1 vehicle. They cannot be re-coded or re-keyed.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Bolt replacement toolbox latch lock cylinder. This is going to replace the lock cylinder in your Bolt toolbox latch. That's gonna code to the late model GM keys. This will fit with the model that you see on the screen there. So if you are needing to switch out that original core, whether the original has become damaged or because the bolt locks are permanently coated to only one vehicle key and cannot be recoded or re-keyed, if you are switching to a different vehicle, and you wanna use a different ignition key, you can switch out the core here so that you can get that key set up to work with your toolbox latch.
The installation is going to require a nut that is sold separately. You can find it here etrailer using that part number that you see on the screen there, and that's going to allow you to get the cylinder secured in place. This does come with a limited lifetime warranty, so if you we're to have any issues with it, you're more than welcome to reach out to us. But because this is a direct replacement from Bolt, then you can trust it is gonna be compatible with the rest of your setup. No worries about fit issues or anything like that.
So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 4.7 out of 5 stars (124 Customer Reviews)
Replaces a broken cylinder in your BOLT toolbox latch or you can change the latch to fit a different ignition key.AWESOME! My times have always been shipped fast with good tracking.
Great product, works exactly as described. Ordering and shipping both went well.
Great product, easy to match my key. Keep up the good work.
Martin R.
3/31/2019
Still working great. Have not had any trouble with any of the 3 I bought. Great job
The lock worked perfect
These worked great on my A.R.E. DCU truck topper! I was able to key them to my 2020 Ford side cut keys. I did NOT need the retaining nuts in my case, as I was able to reuse the nuts that were on the previous lock tumblers.
Exactly what I needed. Very easy to replace the old cylinder with this one and key to my existing key simply by inserting key and turning.
I’m a locksmit, these locks are common to go out so now I’m keeping extra stock handy. The rekeying process was a little scary at first but simple in the end.
Great company to deal with. Extremely helpful when I was unsure of exactly what lock cylinder I needed.
Fast shipping and amazing service. We will buy from Etrailer again!
I bought a used ARE commercial topper and the previous owner did not have the key to the locks. I went online and found locks that looked similiar to the ones on the topper. These Bolt lock replacement cylinders were spot on perfect. I followed the directions that came with the locks and it worked perfectly. I couldn't be happier with this purchase. Thank you etrailer.com for facilitating this transaction.
They worked perfectly for my A.R.E. contractor truck cap. The key used was for a newer FORD(2015) even though top was on a 2000 Ford. So find out what year keys will work if you want one key on your ring. Again key(no pun intended) is it worked for my A R E topper and was 1/3 cost the ARE stealership wanted
very easy installation, I'm happy,Only that they should include the rubber gaskets, I had to take mine out of the trash because I thought the cylinder would include them
Worked perfectly!!
This product was exactly what I needed for my utility body. Good customer service provided.
Super easy shopping and check out.
Fast shipping.
Will definitely shop again!
Lock cylinders came just barely on time as estimated. In order to make sure things were done just right, I took it slow on the first replacement, took about 30min, then the next took about 10min and the next 5min, this was in 25° weather with gloves and basic tools. Really all that was needed for my locks was needle nose pliers and an adjustable wrench. My existing key turned ckockwise in a full 360°, then worked perfectly. So nice to not have a separate key!
Easy to assemble and it reads my truck key for safer ise
These BOLT locks are absolutely great! Ingenious design that lets you use one key for your truck and the lock. I had purchased a second hand commercial truck topper that had three locks that were keyed to the former owner's truck. The truck topper dealer wanted a whole bunch of money to replace the entire T handles. These solved my problem and the price beat another site!! Very pleased with etrailer! etrailer saved the day and shipping was very fast!
I’m a locksmith with All About Locks and while servicing a world truck in Chico Ca for a customer of mine, one of the locks I ordered didn’t work as intended.
When I called etrailer they immediately sent me out a new one. Excellent customer service. Thank you!
I will defiantly be using them again.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
M.noah
9/26/2016
After a year lock still works great