Replacement Knob for Phoenix Faucets 3 Handle Faucets and Garden Tub Faucets - Qty 1

Video Transcript for Review of Phoenix Faucets RV Faucets Parts - Replacement Knob - PF39FR

Ellen: Hey everyone. I'm Ellen here at etrailer.com. And today we're taking a look at the replacement knob for your Phoenix faucet handle. This is going to work for either your three knob or three handle faucet, or your garden tub faucet. It has a little arrow insignia at the top. It also does come with a replacement screw.

So to get access to that you just need a flat blade screwdriver, or something relatively narrow but strong so you can pop that little center section out. Should just pop out and then you can get access to that screw there.So it's going to be the same thing to take off your old handle. Just pop out that center piece and then you can use a Phillips head screwdriver to tighten down the screw in the center. Now if your original handle didn't have the arrow, maybe it had a H or a C, or hot or cold written on there, you can just switch that little center piece out for the arrow, and use that instead if it's still available, or if it isn't broken. But it does come with this little arrow piece.It's going to be this kind of knobby design.

It has one, two, three, four, five, six, seven knobs, so pretty comfortable in your hand. Pretty ubiquitous handle, so should be a good replacement for just about any faucet for you. As far as the measurements, just for reference, it's about 2-1/4 inch wide, about roughly about two inches tall. And the screw, take that out and measure it as well, is about 2-1/8 inch long. But that's about going to do it for our look at the replacement knob for your Phoenix faucet's handle..