To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.
Features:
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the port on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, and it is taped to another harness near the emergency brake pedal.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this Curt dual plugin custom wiring adapter for the Curt brake controllers. Now this is a custom fit part. It is designed to fit the 2018 Jeep JL Wrangler and JL Wrangler Unlimited with the factory tow package, also, the 2019 and newer Jeep Wrangler and Wrangler Unlimited with the factory tow package, and the 2020 Jeep Gladiator with the factory tow package.On a custom fit part like this, I always like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show if this will work with your application.Now, this is a plug-in wiring adapter. It allows for nice, quick, simple installation of your Curt brake controller to your vehicle. There's no cutting or splicing required.
Basically, this end here is a custom connector that'll plug into the built-in port that's beneath the dash of your vehicle. That port is usually located underneath the dash to the left of the steering column and it's usually taped to another harness near the emergency brake pedal. The other end right here plugs into the back of your Curt brake controller.This is compatible with the time-delayed and the proportional brake controllers from Curt. Now the brake controller must have a built-in plug for this adapter to connect to. It will not work with controllers that have pigtail wiring harnesses.
You can see this harness itself is about two foot long. It does use 12 gauge wires. If you notice, they have a nice protective wire loom covering them to prevent damage to the wires.But that should do it for the review on this Curt dual plugin custom wiring adapter for the Curt brake controllers.
Average Customer Rating: 5.0 out of 5 stars (8 Customer Reviews)
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.They always have top notch products and have the fastest shipping over anyone
Makes installing a controller in the Gladiator easy peasy...that is, once you locate the plug on the vehicle harness. For newer Gladiator builds (2021) it seems like they are taping the plug to keep it from flopping around so you have to reach around a bit to find it, peel the tape and free the end. It was impossible for me to contort myself to where I could see it so had to do by feel. Once the plug was free, add the adapter, locate the controller and good to go.
This harness made my installation plug and play on my Jeep Rubicon.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.