Curt Fusion Ball Mount Review C45134 Video

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

In most cases when customers have square crossbars, they are the older Thule style which unfortunately have been discontinued and there's no way to use them on newer vehicles as Thule has changed the feet design since then and stopped producing…

The difference is the color of the pin and clips of the two kits. The Patriot Adjustable Hitch Adapter part #PH67SR has black pin and clips whereas the #PH54FR has red ones.

Yes. You can use a drop ball mount like the #C45336 with the Patriot Hitches #PH54FR to get to your 16" drop total. 5" drop ball mounts are very uncommon, so a 6" like mentioned above and raising the receiver in the Patriot mount will…

For an anti-rattle device that can be used on a 3 inch hitch application we have the XL Anti-Rattle Hitch Lock part #SHP2040-XL which would go into the shank of your 3 inch hitch an can be used with a sleeve adapter as well.

I have another option for you, but while the Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH54FR would allow you to install your current ball mount with provisions for two friction sway control, it has not be tested for this at this time…

The Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K #2753 is not the correct fit for zero rise or drop. For the zero rise or drop you will need the Curt Solid 2-Ball Mount for 2" Hitches - 2"…

For your 2013 Ford Escape without factory tow package the least costly trailer wiring harness is #HM11140514. But if it were me I would spend a few more cents and go with the Tekonsha harness #118566 because we hear about fewer issues with the…

For a hitch for your 2017 Lexus GX 460 we have the Draw Tite hitch part #75685 which is going to be your best option as it has the best price and is a 2 inch hitch which is what most hitch accessories are made to fit. If you wanted to do some towing…

What you need is a taller weight distribution shank so that you can move the head of the system up higher and get the additional height needed. For that the Curt part #C17123 which would give you additional height.

With the large collar on the end of your receiver for your Subaru Ascent it does not appear you will be able to use the Blue Ox Hitch Receiver Immobilizer II #BX88224. Instead you can use the Gen-Y Iron Grip Anti-Rattle Hitch Pin #GY39FR with the…

I wouldn't say one type of ball mount has more or a reputation of failing than the other. The welded on triple ball mount part #BWBMTT31004 that you referenced is very well made and would not have any issues with reliability.