Curt Class III Ball Mount Review C45064 Video

The Class III Curt trailer hitch part #C13418 that you referenced has a 5/8 inch diameter hitch pin hole which is standard for the 2 inch hitch size. So the Curt anti-rattle device 22323 part #C69HR would fit.

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56434 will certainly work with the 2020 Toyota RAV4 LE Hybrid model. The Curt is designed for all models of the RAV4 so it will work well for you. The installation…

On the 2017 Toyota Tacoma, the hitch pins hole diameter is 5/8 of an inch. For that size hole, the Curt Hitch Lock #C23519 would be a great option for your Tacoma. The Curt pin will work with both 2 and 2-1/2 inch receiver openings and is constructed…

For a locking hitch pin that will fit the 2" trailer hitch you have on your 2018 Toyota Tacoma TRD I recommend the Curt Trailer Hitch Receiver Lock part #C23519. This lock has a span of 3-5/8" which should be more than enough for your hitch…

The Ford Logo Trailer Hitch Receiver Cover #PC002236 that you were looking at is all metal and you can use the Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches #2866DAT to secure it to your hitch receiver. If…

Any trailer hitch whose receiver tube is positioned below a vehicle's rear bumper is going to reduce ground clearance and approach angle to some degree. The actual clearance lost depends on many factors including wheel/tire size, passenger and…

Wiring your 2007 Ford F-150 STX for towing a trailer with a 4-Way flat connector should not be too hard. If you look under the truck along the inside of the driver's side frame rail, you may see a connector that has wires running to it. If so,…

The 8004039 you mentioned is the Yakima HullRaiser kayak carrier, and we do have what you need to connect the carrier to your square crossbars (1-1/4 inch by 3/4 inch crossbars are technically rectangular but are called square for whatever reason).…

When Yakima says something will fit on square bars they mean Thule square bars. Thule square bars measure 1-1/4 inches wide and 7/8 inches tall.

Yes, the Yakima Universal MightyMounts #Y03590 will fit great with the Thule square crossbars whether they are the new or old generation. These adapters are great for older Yakima products that were designed to fit one specific type of crossbar.…

We don't have a kit for the RIde-On Adapter TH532 without the crossbars, but we do carry all of the parts individually. 4 of the #915-0625-54 4 of the #853-2154 4 of the #853-2156 4 of the #853-5267 4 of the #753-2854 4 of the #936060054 4 of the…

As long as you have a brake flange on your axle, adding brakes is easy. You also can add a brake flange by welding one on if you don't have one, so yes...brakes can be added to your axle. There are some measurements I need of your spindle or the…