CE Smith Boat Trailer Tie-Down Bracket Review and Installation Video

Thank for the photos of your boat trailer! The CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies #CE10196G-4 that you referenced are a great option to replace the existing bunk system on your boat trailer. These bolster brackets and swivel…

The CE Smith Galvanized Bolster and Swivel Mounting Brackets for Bunk Boards #CE10001G-4 come with nuts and bolts to attach the swivel brackets to the bolster brackets, but you will need to supply either lag bolts or other through bolt hardware to…

Thanks for the photos. For your boat trailer, I recommend the CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4 #CE10002G-4. These brackets are available in different heights. These brackets are held to your trailer…

I spoke with my contact at CE Smith, and they said the Bolster and Swivel Bracket Assembly for Boat Trailers, like part #CE10000G, do not bear the weight of the boat. The U-bolt that attaches the brackets to the trailer frame support the weight of…

Since your main concern is the marks on the hull of your boat I recommend going to the Yates TPR Ribbed Wobble Roller. These rollers are constructed of thermal-plasticized rubber which is a non-marking, non-scratching material. It is stronger and…

Yes the brackets #CE10002G-4 would easily support the weight of your 2,060 lb boat.

We definitely have options for brackets to mount your bunk boards. This will depend on the size needed, of course, but here are a couple options for you to take a look at. The CE Smith #CE10003G-4 will come as a 4 pack and are 11 inches tall,…

You would just need to order a quantity of 6 of the part #CE10002G to get six of the brackets that come with the part #CE10002G-4.

When choosing tie-down straps like the BoatBuckle G2 Retractable Tie-Down Strap, #IMF14220, you will want to keep a few things in mind. Boat tie-downs are designed for normal highway driving. The purpose of most boat tie-downs is to strap the…

It's not needed to glue the bunk board carpet like #CE11349 as well as staple it. With just staples you'd be fine.

Pressure treated lumber can be used for bunk boards along with bunk carpet like the #CE11349. However, it is possible that some corrosion may occur from the chemicals in the lumber over time. The CE Smith bunk boards like #CE27840 are made from…

It sounds like you currently have #L44649 bearings with an inner diameter of 1.063" and a grease seal like the #34823 with an inner diameter of 1.249". For a hub that matches these, along with the 4 on 4 bolt pattern, we have the CE Smith…