Customers compare BW53FR to these similar products
Products Featured in this Video
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and…
view full answer...The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line.…
view full answer...An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…
view full answer...That is definitely a feature which worries me about the B&W Continuum Weight Distribution System #BW78FR. While there is not a specific measurement I can give you as the bars move up and down depending on the load placed on the bars, B&W…
view full answer...The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…
view full answer...The B&W Continuum Weight Distribution System part #BW78FR for 2" or part #BW28FR for 2.5" is going to be your best option for a toy hauler trailer like a Grand Design Momentum 31G since the tongue weight can vary heavily based on loaded…
view full answer...I looked up the weight of of your East to West 2900KBH and based on that and how well we know the B and W Continuum part #BW78FR works this would be a really great option that would do a much better job than the Fastway kit you have now at…
view full answer...The B&W Continuum Weight Distribution System part #BW78FR per B&W, does have built-in sway control. That said, all weight distribution systems have some sway control as they provide friction at the connection point which will then in turn…
view full answer...Thanks for reaching out! All weight distribution systems have the same basic shank size so you can definitely use your Equal-i-zer shank with the B&W Continuum Weight Distribution System w/Sway Control #BW28FR if the included shank doesn't…
view full answer...Yes, you can use the B and W Continuum #BW78FR an Air Lift air bag kit #AL88375 on your 2020 Ram 1500. You would want to first decide how much air pressure in the bags you want and then setup up the Continuum and you'd be set.
view full answer...The B&W Continuum Weight Distribution System part #BW28FR is great for varying loads since you can easily adjust the tongue weight setting. That said, I don't recommend this system when going off-road as it hangs down too low and could create…
view full answer...The B&W Continuum Weight Distribution System part #BW78FR is not compatible with any other weight distribution system shank. The hole spacing on the shank for the head adjustment is 1-1/2" on center which is more than the 1-1/4"…
view full answer...