Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable Ball Mount - 325-GH-1524 Video

I have attached photos showing the dimensions of the Replacement Sway-Control Bracket #EQ95-01-5600. The larger, L-shaped bracket measures 10 inches long x 2 inches wide and the smaller brackets measure 8-1/4 inches long x 1-1/2 inches wide. These…

The B&W Continuum Weight Distribution System part #BW28FR is great for varying loads since you can easily adjust the tongue weight setting. That said, I don't recommend this system when going off-road as it hangs down too low and could create…

We do carry universal hitches that are rated for 10,000 pounds and above, like the Draw-Tite part #41990-07. I've linked the selection. With that being said a lot of times when a motorhome is rated for 5,000 pounds towing it isn't the hitch…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

The B&W Continuum Weight Distribution System part #BW78FR is not compatible with any other weight distribution system shank. The hole spacing on the shank for the head adjustment is 1-1/2" on center which is more than the 1-1/4"…

That is definitely a feature which worries me about the B&W Continuum Weight Distribution System #BW78FR. While there is not a specific measurement I can give you as the bars move up and down depending on the load placed on the bars, B&W…

Best option we have would be a service body cross tube part #41990 like you mentioned and then having plates or fabricated like you mentioned.

For your 2003 Holiday Rambler motorhome, I recommend taking a look at the: -Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-07. This trailer hitch as a maximum towing capacity of 16,000lbs, with a maximum tongue weight capacity of…

For your 2003 Fleetwood Bounder, I recommend taking a look at the: -Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-07. This is a universal hitch that has a maximum towing capacity of 16,000lbs, a maximum tongue weight capacity of…

Yes, we do have the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT82GR for your 2023 Volvo XC60. This receiver has a removable locking receiver tube to secure it to the crossbar when needed. When not needed the removable receiver can be stored…

Yes you can use the lower rated Gen-Y Torsion weight distribution shank part #GY54FR which matches your tongue weight range as well as drop requirement. You would need a sleeve adapter like you mentioned as well like with the #325-GH-007 and…

I reached out to B&W, who said the distance was 11-3/8 inches from the hitch pin hole to the center of the hitch ball on the B&W Continuum Weight Distribution System #BW28FR.