Customers compare AP233-H248 to these similar products
Products Featured in this Video
Speaker 1: Today we're taking a look at a Tandem Axle Trailer Hanger Kit for Double-Eye Springs. This leaf spring mounting kit includes 3 and 1/4 inch tall front and rear hangers, which are these components here, and 3 and 5/8 inch tall center hangers, which are located here, and it comes with all the necessary hardware. So everything that came in the box, I have laid out here on the… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Skip good to hear from you again. The #e97SR leaf spring that you mentioned is going to be our best option for replacing the springs on your 1965 Streamline Empress. All of the 2" wide leaf springs that we carry are going to be slipper…
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...Yes, the Grease Seals 10-36 part #RG06-070 are a direct replacement for the Dexter 010-036-00.
view full answer...The center hangers in the Tandem-Axle Trailer Hanger Kit #APT8 that you recently purchased are indeed longer. This is actually pretty common for tandem axle trailers. The reason for the extra length on the middle hanger is related to the shackle…
view full answer...The hanger length can affect the trailer height. You would need to change the height of all the hangers equally to keep the geometry of the trailer the same. But at the end of the day there are other ways to get more height on a trailer. Keep in mind…
view full answer...The note that says that the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 shouldn't be used on wet or icy roads is a little misplaced. This is related to the painted steel wheel that it has and its slightly…
view full answer...I went and pulled a Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 from our warehouse to determine the weight capacities and found that on the sidewall it was stamped Load Range D with a 2,150 lb capacity at 65…
view full answer...To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger should start where you…
view full answer...The Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs #ASR3500S05 has a deflection of 1-3/4 inches. I've attached a photo to assist. We recommend 4 inches above the tire in most cases for fender mounting to account…
view full answer...That's a pretty big tire size change but it's possible. The tire size of ST205/75-15 has an overall diameter of 27.1 inches and the diameter of the 4.80-12 will be 20.5 inches. So you'd end up with 3.3 less inches of fender clearance…
view full answer...On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…
view full answer...The Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs #AP233 is the standard suspension kit. For a heavy duty option, we have the Dexter Axle Heavy-Duty Suspension Kit for Tandem Axle Trailers - 1-3/4" Double Eye…
view full answer...