Customers compare TASR5200S03 to these similar products
Products Featured in this Video
Speaker 1: Today, we're gonna take a look at the Timbren axle-less trailer suspension system with the 4" lift easy lube spindles, no hubs, and a 5200 pound weight capacity. Now this suspension system will provide a nice safe, smooth, quiet ride for your trailer. It's two separate units that will replace your existing axle. If you notice on these, they use the Aeon progressive rate… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…
view full answer...The correct hanger spacing is 24-3/8 inches apart on a single axle for the 6-Leaf Double-Eye Spring for 5,300 lb Trailer Axles #SP-222275. I have added a link to a video review for you to check out as well.
view full answer...In order to replace the leaf springs on a trailer you'll need to choose ones that have the same unloaded length from eye to eye. If you go with a set slightly longer or shorter you'd then need to swap out the shackle straps as well to help…
view full answer...Thanks for all of the information, Robert! It sounds like you have the Tandem-Axle Trailer Hangers #H248 installed on your tandem axle trailer so to get your Dexter Trailer Axle w/ Electric Brakes #7359765-EB installed you need the following parts: -…
view full answer...It is possible to change your studs from 1/2" to 9/16" if you use drive-in studs and the the length and knurl diameter of the studs is the same, such as the 0.685" knurl diameter of the Kodiak Wheel Bolt - 9/16" #K916WB25. This…
view full answer...I reached out to my rep at Dexter, and unfortunately we cannot identify your axle with that provided axle tag/serial number. With that being said, we can narrow down what axle you have by looking for specific information available. For example, if…
view full answer...I'll start this off by saying that often times when springs are worn, they will flatten out and get longer when measuring the distance between the eyes (make sure you are measuring the distance when the springs are unloaded- you will need to jack…
view full answer...You'd have to box the I-frame of the trailer where you want to install the Timbren Axle-Less Trailer Suspension System #TASR5200S03 so that the kit's side brackets can attach to it.
view full answer...We currently only offer 5-bolt trailer wheels with a 5 on 4-1/2" (most common) and 5 on 5" bolt pattern. In order to find out which bolt pattern you have you'll have to measure from the center of any bolt hole to the point halfway…
view full answer...Yes you can wrap your the Blue Ox 7' Safety Cables - 7,500 lbs #BX88196 or 10,000 lbs #BX88197 around the trailer tongue, though ideally you would use a mounting bracket like the Brophy Safety Chain Mounting Bracket - 6-1/8" Long x 1/2"…
view full answer...It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…
view full answer...The narrowest 15 inch tire we carry is the tire size 205/75R15, this tire has a width of 205 mm or 8.1 inches. For this tire size you would want part #AM32395. If you have a 5 on 4-1/2 inch bolt pattern you could go to the Karrier ST175/80R13 Radial…
view full answer...