Customers compare ARK34FR to these similar products
Products Featured in this Video
Michael: Hi there. I'm Michael with etrailer.com. Today we're going to take a quick look at the Ark Drop Down Corner RV stabilizing jack kit. This kit is going to come with two of these jacks, as well as a winding handle to raise and lower them. These jacks are stabilizer jacks so they're going to allow your chassis to move less. Once you get to your… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.
view full answer...I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…
view full answer...I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.
view full answer...I have attached for you below a photo with the dimensions of the weld-on plate for the Ark Drop Down Corner RV Stabilizer Jack Kit part #ARK94FR. The plates are 117mm long x 72.50mm wide or 4.6" long x 2.8" wide.
view full answer...While we don't carry that exact part number we do have a replacement hub/drum that would work just as well with the part #AKHD-655-6-EZ-K. This is a 6k hub/drum that fits the spindles of the Timbren Axle Less Kit part #ASR1THDS03.
view full answer...The Ark stabilizers won't affect your ground clearance, but to determine the right ones that really depends on how high up your frame is off the ground. Overall, the Ark RV Stabilizer Jacks #ARK34FR are 16.6" collapsed and 23.6"…
view full answer...We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…
view full answer...If you are needing to replace the stabilizer jacks on your 2011 K-Z Durango 1500, we will have 2 different styles. The Stallion Stabilizer Jacks #288-01892-2 are a drop down style so they are easy to use, but they are only rated up to 1,000 pounds…
view full answer...I've attached the dimension pictures you requested for the #37220BL. Let me know if you would like any other dimensions and I'll get them added in.
view full answer...The Demco A-Frame Trailer Coupler #DM14793-95 is designed for standard A-frame trailers which is 50 degrees as you mentioned. I confirmed this with my contact at Demco. This is a 10,000-lb coupler and it is designed for a 2-inch hitch ball.
view full answer...For the Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2" Ball - Bolt On - 10K #DM14793-95 you were looking at I recommend the Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White #EJ-3520-WBX…
view full answer...The Lippert part number 173552 you referenced comes back to the Lippert Manual Pull-Out Step for RVs #LC432682. Because there is a bit of cross over with these item numbers it's best to take a quick measurement of what you currently have to…
view full answer...