Customers compare TL16RK to these similar products
Products Featured in this Video
Today we're reviewing Optronics part number TL16RK. This is a waterproof trailer light kit for trailers that are made more than 80 inches wide. It comes with a 25 foot wiring harness with a four pole flat. If you need it it also comes with a vehicle end four pole flat. This one has a four foot wire. It also comes with two reflectors which you can mount with screws using those holes or you can use… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I contacted Titan and you can install the lever of the Titan Breakaway and Parking Kit for Drum Brakes part #T2385200 to the side of the tongue as long as you keep the cables straight to be able to activate the breakaway if the trailer disconnects.…
view full answer...Good news, I can help you find a tire for your Sundown Horse Trailer. The 205/90-15 is a close tire size to the 7.00-15. The closest size to a 7.00x15 tire that we offer would be a 225/75-15. One 225/75-15 tire that could work for you is the Kenda…
view full answer...Without knowing what trailer lights you have on your 1987 Ranger trailer it would be hard for me to recommend the correct replacement taillight you would need. I attached a link to a page that has all of the red, submersible trailer lights we offer…
view full answer...Yes, a 5.30 x 12 tire will fit the same rim as a 4.80 x 12 tire. Both tire sizes fit on a 4 inch wide rim. There are a couple of things to consider when changing tire sizes. First, the larger 5.30 will be approximately 1.4 inches taller than the 4.80…
view full answer...You can wire a license plate light like part #LPL55CB without running wiring up to the front of the trailer. You simply attach the white wire with the ring terminal to a clean, bare metal surface like the trailer frame, and then attach the black wire…
view full answer...I went out to the warehouse and pulled a Waterproof, Over 80 Inch Trailer Light Kit with 25 Foot Wiring Harness, #TL16RK, to double check, and it does come with a wishbone harness. The trailer sided connector has a split running light signal that is…
view full answer...I recommend the Optronics LED trailer light kit #TL16RK. The kit includes 2 LED tail lights, 2 amber side marker and clearance lights, license plate bracket, wiring harness and stainless steel mounting hardware. I also recommend getting a deluxe…
view full answer...Typically the SAE number isn't a great way to track down the correct lens for a trailer taillights, but with yours I was able to determine that you are looking for the #2423286.
view full answer...There are different taillight requirements for trailers that are over 80 inches in width vs. ones that aren't over 80 inches in width. If you check out the link I attached you will see all of these differenced highlighted. The over 80 inch kits…
view full answer...The best way to handle the grounds for lights on an aluminum trailer is to mount a junction box like #38656. You can then run ground jumpers from all lights back to the junction box and also connect the 4-pole such as #W787268. The box provide both a…
view full answer...The Trailer Light Kit you referred to uses an #ST16RB and a #ST17RB taillight, which use a 1157 replacement bulb which we offer as part #DI79VR .
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...