Review of Equal-i-zer Replacement Head For Equal-i-zer Weight Distribution Systems - EQ90-02-1200 Video

That is a great question. Both of those are great weight distribution hitches. Between the two, I prefer the Reese Dual Cam II over the Strait Line. The Dual Cam uses an L-bracket to attach to the frame, instead of a chain and lift bracket.…

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

We do have the Equal-i-zer 1,200 lb tongue weight spring bars with the part #EQ90-01-1299 which it sounds like you are in need of. You should note that you'll have to replace the head of the system too since they are all different sizes based on…

If you have a 1,000 lb tongue weight Equalizer like part #EQ37100ET and your trailer has a tongue weight of 810 lbs this would be an ideal setup. Now realistically your tongue weight is going to be a bit more once the trailer is loaded so swapping to…

You should have the hitch ball height set so that the trailer tows as level as possible behind your pickup. If there is a setting that goes between slightly higher than level and slightly lower than level, opt for the slightly lower setting, when the…

That's a very well thought-out question and the correct system will be the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW #EQ37120ET because the ideal system is one in which your total tongue weight…

You'll need a new setup when going to a different spring bar since the bars would be rated totally differently. The part #EQ90-01-1299 is the correct spring bars and then for the head you'd want #EQ90-02-1200.

To upgrade to a higher spring bar rating with an Equal-i-Zer system you have to replace the bars and the head since the bars are all different sizes and the heads are made to fit them specifically. So for bars you'd need the part #EQ90-01-1299…

The Dometic Ultra Breeze Trailer Roof Vent Cover #DMC38FR you were looking at is compatible with your Dometic DV1450. The metal clips included with the cover will slip through the holes of the cover and attach to the mounting points on your vent.

I have a solution for you but the spring bars are a slightly different size, so in order to go from 1,400 lbs spring bars to the 1,200 lbs Spring Bars for Equal-i-zer item #EQ90-01-1299 you would also need to get a new head unit. You will want the…

For a large socket that will fit the 1-7/8 inch nut on ball #19286 you can use #EQ70-00-4800.

The Replacement Socket for Equal-i-zer 1,000 Lb Weight Distribution Systems part #EQ90-03-1000 is larger than the Replacement Socket for Equal-i-zer 600 Lb Weight Distribution Systems part #EQ90-03-0600 therefore, it cannot be used with the…